AISI / SAE steel grades — 2156 designations — Page 35
Every grade designated under AISI / SAE, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Every name on this page is an indicative cross-reference, not an asserted identity: the grades are close, not interchangeable. Check the composition before you substitute.
Also known as
2156 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| J92800 | 1.4435 | Stainless steels | ≤ 0.03 | 20 |
| J92803 | 1.4825 | Heat-resistant cast steels | 0.15–0.35 | 4 |
| J92804 | 1.4409 | Cast stainless steels | ≤ 0.03 | 4 |
| J92900 | 1.4408 | Cast stainless steels | ≤ 0.07 | 7 |
| J92971 | 1.4581 | Cast stainless steels | ≤ 0.07 | 9 |
| J93000 | 1.4412 | Cast stainless steels | ≤ 0.07 | 3 |
| J93005 | 1.4823 | Heat-resistant cast steels | 0.3–0.5 | 3 |
| J93503 | 1.4826 | Heat-resistant cast steels | 0.3–0.5 | 13 |
| J93503 | 1.4837 | Heat-resistant cast steels | 0.3–0.5 | 7 |
| J94003 | 1.4826 | Heat-resistant cast steels | 0.3–0.5 | 13 |
| J94003 | 1.4837 | Heat-resistant cast steels | 0.3–0.5 | 7 |
| J94013 | 1.4826 | Heat-resistant cast steels | 0.3–0.5 | 13 |
| J94013 | 1.4837 | Heat-resistant cast steels | 0.3–0.5 | 7 |
| J94203 | 1.4848 | Heat-resistant cast steels | 0.3–0.5 | 10 |
| J94204 | 1.4848 | Heat-resistant cast steels | 0.3–0.5 | 10 |
| J94224 | 1.4848 | Heat-resistant cast steels | 0.3–0.5 | 10 |
| JIP | — | — | — | 3 |
| K 2 | 1.3342 | High-speed steels | 0.95–1.05 | 3 |
| k 3 | 1.3342 | High-speed steels | 0.95–1.05 | 3 |
| K 700 | 1.3802 | Non-magnetic steels | 1.1–1.3 | 6 |
| K 700 | 1.3802 | Non-magnetic steels | 1.05–1.35 | 7 |
| K00040 | 1.0338 | Unalloyed structural steels | ≤ 0.08 | 18 |
| K01600 | 1.0562 | Fine-grain structural steels | ≤ 0.18 | 18 |
| K01701 | 1.0426 | Aging resistant steels | 0.08–0.2 | 17 |
| K01701 | 1.0425 | Heat-resistant structural steels | ≤ 0.2 | 20 |
| K01803 | 1.0445 | Higher strength steels | — | 12 |
| K01804 | 1.0038 | Unalloyed structural steels | ≤ 0.17 | 26 |
| K01804 | 1.0036 | Unalloyed structural steels | ≤ 0.17 | 20 |
| K01804 | 1.0036 | Unalloyed structural steels | ≤ 0.17 | 19 |
| K01804 | 1.0028 | Unalloyed structural steels | ≤ 0.15 | 18 |
| K02001 | 1.0038 | Unalloyed structural steels | ≤ 0.17 | 26 |
| K02001 | 1.0036 | Unalloyed structural steels | ≤ 0.17 | 20 |
| K02001 | 1.0036 | Unalloyed structural steels | ≤ 0.17 | 19 |
| K02001 | 1.0028 | Unalloyed structural steels | ≤ 0.15 | 18 |
| K02001 | 1.8945 | Weathering steels | ≤ 0.12 | 16 |
| K02002 | 1.8902 | Fine-grain structural steels | ≤ 0.2 | 19 |
| K02100 | 1.0425 | Heat-resistant structural steels | ≤ 0.2 | 20 |
| K02100 | 1.0436 | Fine-grain structural steels | 0.15–0.2 | 14 |
| K02101 | 1.0461 | Fine-grain structural steels | ≤ 0.18 | 5 |
| K02102 | 1.0461 | Fine-grain structural steels | ≤ 0.18 | 5 |
| K02203 | 1.0481 | Heat-resistant structural steels | 0.08–0.2 | 17 |
| K02301 | 1.0038 | Unalloyed structural steels | ≤ 0.17 | 26 |
| K02301 | 1.0036 | Unalloyed structural steels | ≤ 0.17 | 20 |
| K02301 | 1.0036 | Unalloyed structural steels | ≤ 0.17 | 19 |
| K02301 | 1.0461 | Fine-grain structural steels | ≤ 0.18 | 5 |
| K02301 | 1.0028 | Unalloyed structural steels | ≤ 0.15 | 18 |
| K02305 | 1.0050 | Unalloyed structural steels | — | 23 |
| K02305 | 1.0050 | Unalloyed structural steels | — | 23 |
| K02401 | 1.0426 | Aging resistant steels | 0.08–0.2 | 17 |
| K02401 | 1.0425 | Heat-resistant structural steels | ≤ 0.2 | 20 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.