ASTM steel grades — 2441 designations
Every grade designated under ASTM, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Every name on this page is an indicative cross-reference, not an asserted identity: the grades are close, not interchangeable. Check the composition before you substitute.
Also known as
2441 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| 012 | 1.0301 | Case hardening steels | 0.07–0.13 | 20 |
| 040 | 1.1157 | Quenched and tempered steels | 0.36–0.44 | 9 |
| 1006 | 1.0301 | Case hardening steels | 0.07–0.13 | 20 |
| 1008 | 1.0301 | Case hardening steels | 0.07–0.13 | 20 |
| 101 | 1.0301 | Case hardening steels | 0.07–0.13 | 20 |
| 1010 | 1.0334 | Unalloyed structural steels | ≤ 0.1 | 11 |
| 1012 | — | — | 0.08–0.13 | 5 |
| 1015 | 1.0234 | Unalloyed structural steels | 0.13–0.17 | 7 |
| 1018 | — | — | 0.15–0.2 | 4 |
| 1020 | — | — | 0.18–0.23 | 4 |
| 1020 | — | — | 0.18–0.23 | 5 |
| 1022 1518 | 1.1133 | Quenched and tempered steels | 0.17–0.23 | 20 |
| 1050 | 1.1210 | Steels for surface hardening | 0.5–0.57 | 8 |
| 13Cr-4Ni | 1.4313 | Stainless steels | ≤ 0.05 | 8 |
| 15-7PH | 1.4532 | Stainless steels | ≤ 0.1 | 5 |
| 1518 | — | — | 0.14–0.2 | 3 |
| 17-4 PH | 1.4540 | Others | ≤ 0.06 | 6 |
| 17-4 PH | 1.4542 | Stainless steels | ≤ 0.07 | 7 |
| 17-7PH | 1.4568 | Stainless steels | ≤ 0.09 | 12 |
| 2.25Cr1Mo | 1.7380 | Heat-resistant structural steels | 0.08–0.14 | 20 |
| 2.25Cr1Mo | 1.7383 | Heat-resistant structural steels | 0.08–0.15 | 9 |
| 2.25Cr1Mo | 1.7375 | Heat-resistant structural steels | 0.1–0.15 | 6 |
| 201 | 1.1133 | Quenched and tempered steels | 0.17–0.23 | 20 |
| 25.22.2 | 1.4466 | Stainless steels | ≤ 0.02 | 6 |
| 2507 | 1.4501 | Stainless steels | ≤ 0.03 | 8 |
| 2507 | 1.4410 | Stainless steels | ≤ 0.03 | 9 |
| 25Cr-5Ni-Mo-N | 1.4460 | Stainless steels | ≤ 0.05 | 10 |
| 25Cr-7Ni-Mo-N | 1.4501 | Stainless steels | ≤ 0.03 | 8 |
| 25Cr-7Ni-Mo-N | 1.4410 | Stainless steels | ≤ 0.03 | 9 |
| 26-3 Mo | 1.4529 | Stainless steels | ≤ 0.02 | 3 |
| 304Cu | 1.4560 | Others | ≤ 0.035 | 8 |
| 304Cu | 1.4567 | Stainless steels | ≤ 0.04 | 8 |
| 305 3008 | 1.4303 | Stainless steels | ≤ 0.06 | 14 |
| 310 314 | 1.4841 | Heat resistant steels | ≤ 0.2 | 17 |
| 310L NAG | 1.4335 | Stainless steels | ≤ 0.02 | 9 |
| 3135 3140 | 1.5711 | Others | 0.38–0.43 | 8 |
| 3140H | 1.5711 | Others | 0.38–0.43 | 8 |
| 316LVM | 1.4436 | Stainless steels | ≤ 0.05 | 19 |
| 316LVM | 1.4435 | Stainless steels | ≤ 0.03 | 20 |
| 316LVM | 1.4432 | Others | ≤ 0.03 | 11 |
| 321 | 1.1133 | Quenched and tempered steels | 0.17–0.23 | 20 |
| 347 H | 1.4550 | Stainless steels | ≤ 0.08 | 15 |
| 347 H | 1.4961 | High-temperature steels | 0.04–0.1 | 8 |
| 361 | 1.1157 | Quenched and tempered steels | 0.36–0.44 | 9 |
| 4120 | — | — | 0.18–0.23 | 3 |
| 4125 | 1.7214 | Special steels for aviation and aerospace | 0.22–0.29 | 9 |
| 4125 | 1.7218 | Quenched and tempered steels | 0.22–0.29 | 25 |
| 4135 | 1.7220 | Quenched and tempered steels | 0.3–0.37 | 24 |
| 4140 | — | — | 0.38–0.43 | 4 |
| 4145 | — | — | 0.43–0.48 | 2 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.