Fe310-0
Fe310-0 is a designation in BS for the material held under material number 1.0035, also listed as S185. It is a material in the category Unalloyed structural steels. We list 80 designations recorded for this grade, in the standards DIN / EN, AISI / SAE, ASTM, BS, AFNOR, UNE, ISO, JIS, NP, GB, GOST, UNI, SS, ČSN, STN, PN, MSZ, STAS, BDS, ÖNORM, NBN, SFS and KS.
If you came for one of these
The most-used names for this grade.About Unalloyed structural steels
Unalloyed structural steels include all low-carbon steels in which the iron companions do not exceed specified minimum values. The yield strength, formability and weldability are the decisive factors for their use. They are soft, pliable, tough and stretchy, but cannot be hardened by heat treatment.
This describes the material class as a whole. Always confirm the individual grade against the standard before ordering.
Also known as
80 designations · 23 standards · nothing hidden- Fe310-0Indicative
- Gr.AIndicative
- S185This grade’s own nameFormerlySt 33
- St 33This grade’s own nameWithdrawnSuperseded byS185
- 15HRIndicative
- 15HSIndicative
- Fe310-0Indicative
- HR 15Indicative
- S185Indicative
- Fe310-0Indicative
- 07Kh24N8M2D3LIndicative
- 07Х24Н8М2Д3ЛIndicative
- 18Kh15N3M-ShIndicative
- 18Х15Н3МIndicative
- 18Х15Н3М-ШIndicative
- 20Indicative
- PA-ZhF1KIndicative
- PA-ZhGrDK1Indicative
- PA-ZhGrF1KIndicative
- PZhV1Indicative
- S235Indicative
- ST0Indicative
- St1kpIndicative
- St1psIndicative
- St1spIndicative
- ВКЛ-1Indicative
- ДИ1Indicative
- ДИ1-ШIndicative
- ЖГр0.5Д3К0.8Indicative
- ЖГр1.2Д2.5К0.8Indicative
- ЖГр1Д2.5КIndicative
- ЖФ1К1Indicative
- ЖФ1К1Гр0.8Indicative
- С235Indicative
- Ст0Indicative
- Ст0 Ст1кпIndicative
- Ст1кпIndicative
- A0Indicative
- Fe 310-0Indicative
- Fe310OIndicative
- S185Indicative
- A320Indicative
- FE310-0Indicative
Every designation on file is listed — no truncation, no “+ n more”. Each one is itself a route that leads back here.
Predicted transformation temperatures
Not enough recorded composition to predict a transformation temperature for this grade — missing: C, Mn, Si, Ni, Cr, Mo.
Physical & mechanical properties
An absent property means we hold no value for it — it is left out rather than estimated, interpolated from a neighbouring grade, or filled from a handbook. It does not mean the property is undefined for the material.
Properties by condition
4 conditions · 27 valuessteelnumber| Thicknessmm | ReHN/mm² | RmN/mm² |
|---|---|---|
| ≤ 3 | — | 310 – 540 |
| 3 – 100 | — | 290 – 510 |
| ≤ 16 | 185 | — |
| 16 – 40 | 175 | — |
| 40 – 63 | 175 | — |
| 63 – 80 | 175 | — |
| 80 – 100 | 175 | — |
| 100 – 150 | 165 | 280 – 500 |
| 150 – 250 | — | 270 – 490 |
| 150 – 200 | 155 | — |
steelnumber| Thicknessmm | A80% · Lo = 80 mm | A% · Lo = 5,65 √So |
|---|---|---|
| ≤ 1 | 10 | — |
| 1 – 1.5 | 11 | — |
| 1.5 – 2 | 12 | — |
| 2 – 2.5 | 13 | — |
| 2.5 – 3 | 14 | — |
| 3 – 40 | — | 18 |
| 40 – 63 | — | 17 |
| 63 – 100 | — | 16 |
| 100 – 150 | — | 15 |
| 150 – 250 | — | 15 |
splav| Delivery state | RmN/mm² | ReN/mm² | A5% | Z% |
|---|---|---|---|---|
| Rolled stock, GOST 535-2005 | 305 – 390 | 165 – 195 | 32 – 35 | — |
| Wire rods , GOST 30136-95 | 420 – 470 | — | — | 66 – 68 |
splav| Temperature°C | Densityg/cm³ |
|---|---|
| 20 | 7.85 |
Every figure holds only for the condition on its own row. Values are never merged across conditions or across sources, never averaged, and never interpolated between two rows. An em dash means no value on file — never zero. Figures are converted to the unit in the column header; the source’s own wording is kept and shown where the two differ.
Looking for this grade under another name?
Search the catalogue by designation, material number or composition — every name on this page is itself a way in.