ČSN steel grades — 647 designations — Page 12
Every grade designated under ČSN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an indicative cross-reference, not an asserted identity — the grades are close, not interchangeable. 3 of 50 rows differ and carry a “This grade’s own name” mark.
Also known as
647 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| 19572 | 1.2379 | Tool steels for cold work | 1.45–1.6 | 20 |
| 19573 | 1.2379 | Tool steels for cold work | 1.45–1.6 | 20 |
| 19573PH | 1.2379 | Tool steels for cold work | 1.45–1.6 | 20 |
| 19614 | 1.2721 | Tool steels for cold work | 0.45–0.55 | 4 |
| 19655 | 1.2767 | Tool steels for cold work | 0.4–0.5 | 9 |
| 19662 | 1.2714 | Tool steels for hot work | 0.5–0.6 | 15 |
| 19662 | 1.2713 | Tool steels for cold work | 0.5–0.6 | 12 |
| 19663 | 1.2714 | Tool steels for hot work | 0.5–0.6 | 15 |
| 19663 This grade’s own name | — | — | — | — |
| 19665 This grade’s own name | — | — | — | — |
| 19712 | — | — | 0.9–1.05 | 1 |
| 19714 | 1.2453 | Tool steels for cold work | 1.25–1.35 | 5 |
| 19720 This grade’s own name | — | — | — | — |
| 19721 | 1.2581 | Tool steels for hot work | 0.25–0.35 | 18 |
| 19721 | — | — | 0.3–0.4 | 1 |
| 19732 | 1.2542 | Tool steels for cold work | 0.4–0.5 | 12 |
| 19733 | 1.2550 | Tool steels for cold work | 0.55–0.65 | 15 |
| 19733 | 1.2542 | Tool steels for cold work | 0.4–0.5 | 12 |
| 19735 | 1.2550 | Tool steels for cold work | 0.55–0.65 | 15 |
| 19735 | 1.2542 | Tool steels for cold work | 0.4–0.5 | 12 |
| 19810 | 1.3318 | High-speed steels | 0.9–1 | 4 |
| 19810 | 1.3355 | High-speed steels | 0.73–0.83 | 22 |
| 19820 | 1.3333 | High-speed steels | 0.95–1.03 | 2 |
| 19824 | 1.3355 | High-speed steels | 0.73–0.83 | 22 |
| 19829 | 1.3342 | High-speed steels | 0.95–1.05 | 3 |
| 19830 | 1.3339 | High-speed steels | 0.8–0.88 | 16 |
| 19830 | 1.3553 | Bearing steels | 0.78–0.86 | 2 |
| 19830 | 1.3343 | High-speed steels | 0.86–0.94 | 19 |
| 19830 | 1.2581 | Tool steels for hot work | 0.25–0.35 | 18 |
| 19837 | 1.3344 | High-speed steels | 1.15–1.25 | 8 |
| 19851 | 1.3246 | High-speed steels | 1.05–1.15 | 5 |
| 19852 | 1.3243 | High-speed steels | 0.87–0.95 | 19 |
| 19855 | — | — | — | 1 |
| 19861 | 1.3207 | High-speed steels | 1.2–1.35 | 14 |
| 19902 | 1.2709 | Tool steels for cold work | ≤ 0.03 | 1 |
| 19902 PH | 1.2709 | Tool steels for cold work | ≤ 0.03 | 1 |
| 415320 | 1.7733 | Heat-resistant structural steels | 0.2–0.28 | 15 |
| 42 2942 | 1.4501 | Stainless steels | ≤ 0.03 | 8 |
| 42 2942 | 1.4410 | Stainless steels | ≤ 0.03 | 9 |
| 422 630 | 1.0416 | Others | 0.15–0.2 | 17 |
| 422 633 | 1.0416 | Others | 0.15–0.2 | 17 |
| 422 640 | 1.0443 | Others | ≤ 0.11 | 13 |
| 422 643 | 1.0443 | Others | ≤ 0.11 | 13 |
| 422 650 | 1.0551 | Unalloyed structural steels | ≤ 0.24 | 10 |
| 422 660 | 1.0553 | Unalloyed structural steels | ≤ 0.2 | 20 |
| 422 670 | 1.0554 | Unalloyed structural steels | ≤ 0.2 | 8 |
| 422 714 | 1.1133 | Quenched and tempered steels | 0.17–0.23 | 20 |
| 422 715 | 1.1167 | Quenched and tempered steels | 0.32–0.4 | 17 |
| 422 904 | 1.4008 | Stainless steels | ≤ 0.1 | 5 |
| 422 906 | 1.4027 | Cast stainless steels | 0.16–0.23 | 14 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.