ČSN steel grades — 647 designations — Page 5
Every grade designated under ČSN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Every name on this page is an indicative cross-reference, not an asserted identity: the grades are close, not interchangeable. Check the composition before you substitute.
Also known as
647 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| 13 180 | 1.1240 | Others | 0.6–0.7 | 10 |
| 13 180 | 1.1233 | Quenched and tempered steels | 0.52–0.6 | 7 |
| 13 250 PH | 1.0912 | Others | 0.42–0.5 | 11 |
| 13030 | 1.0481 | Heat-resistant structural steels | 0.08–0.2 | 17 |
| 13030 | 1.0491 | Fine-grain structural steels | ≤ 0.16 | 5 |
| 13030 | 1.1133 | Quenched and tempered steels | 0.17–0.23 | 20 |
| 13030 | 1.0844 | Unalloyed structural steels | — | 1 |
| 13123 | 1.1133 | Quenched and tempered steels | 0.17–0.23 | 20 |
| 13126 | 1.0582 | Others | ≤ 0.2 | 3 |
| 13141 | 1.1170 | Quenched and tempered steels | 0.25–0.32 | 16 |
| 13141 | 1.1165 | Quenched and tempered steels | 0.25–0.32 | 16 |
| 13180 | 1.1244 | Others | 0.65–0.75 | 2 |
| 13180 | 1.1259 | Others | 0.75–0.85 | 1 |
| 13220 | 1.8902 | Fine-grain structural steels | ≤ 0.2 | 19 |
| 13220 | 1.5218 | Others | 0.2–0.23 | 13 |
| 13240 | 1.5122 | Quenched and tempered steels | 0.33–0.41 | 6 |
| 13242 | 1.5223 | Quenched and tempered steels | 0.38–0.45 | 8 |
| 13250 | 1.0912 | Others | 0.42–0.5 | 11 |
| 13251 | 1.5024 | Spring steels | 0.42–0.5 | 6 |
| 13251 | 1.7102 | Spring steels | 0.51–0.59 | 14 |
| 13261 | 1.5026 | Spring steels | 0.52–0.6 | 20 |
| 13261 PH | 1.5026 | Spring steels | 0.52–0.6 | 20 |
| 13270 | 1.5028 | Spring steels | 0.6–0.7 | 11 |
| 13270 | 1.0961 | High-strength multi-phase steels | ≤ 0.18 | 14 |
| 13270 | 1.7102 | Spring steels | 0.51–0.59 | 14 |
| 14 151 | 1.7035 | Quenched and tempered steels | 0.38–0.45 | 18 |
| 14 151 PH | 1.7035 | Quenched and tempered steels | 0.38–0.45 | 18 |
| 14 220 | 1.7139 | Case hardening steels | 0.14–0.19 | 11 |
| 14 240 | 1.5069 | High-strength steels | 0.35 | 7 |
| 14100 | 1.2067 | Tool steels for cold work | 0.95–1.1 | 21 |
| 14100 | 1.3505 | Bearing steels | 0.93–1.05 | 22 |
| 14100 | 1.0547 | Others | ≤ 0.22 | 4 |
| 14109 | 1.3505 | Bearing steels | 0.93–1.05 | 22 |
| 14109 | 1.2067 | Tool steels for cold work | 0.95–1.1 | 21 |
| 14120 | 1.7016 | Case hardening steels | 0.14–0.2 | 11 |
| 14120 | 1.7015 | Case hardening steels | 0.12–0.18 | 15 |
| 14140 | 1.7034 | Quenched and tempered steels | 0.34–0.41 | 23 |
| 14140 | 1.7035 | Quenched and tempered steels | 0.38–0.45 | 18 |
| 14140 | 1.7043 | Steels for surface hardening | 0.34–0.4 | 3 |
| 14140 | 1.7045 | Steels for surface hardening | 0.38–0.44 | 9 |
| 14141 | 1.7033 | Quenched and tempered steels | 0.3–0.37 | 18 |
| 14141 | 1.7035 | Quenched and tempered steels | 0.38–0.45 | 18 |
| 14141 | 1.7220 | Quenched and tempered steels | 0.3–0.37 | 24 |
| 14141PH | 1.7033 | Quenched and tempered steels | 0.3–0.37 | 18 |
| 14146ŽH | 1.7038 | Quenched and tempered steels | 0.34–0.41 | 7 |
| 14146ŽH | 1.7039 | Quenched and tempered steels | 0.38–0.45 | 13 |
| 14148VN | 1.7035 | Quenched and tempered steels | 0.38–0.45 | 18 |
| 14148VN | 1.7045 | Steels for surface hardening | 0.38–0.44 | 9 |
| 14160 | 1.7176 | Spring steels | 0.52–0.59 | 18 |
| 14209 | 1.3520 | Bearing steels | 0.93–1.05 | 16 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.