GB · China · 1 designation

2CrNiMoMnV

2CrNiMoMnV is a grade designated under GB. Its recorded composition includes C 0.24–0.3%, Cr 1.25–1.45%, Mn 1.4–1.6%, Ni 0.8–1.2% and Mo 0.45–0.6%. No cross-standard equivalents are recorded for this grade yet. Recorded mechanical properties include HB ≤ 235.

Designations 1

Search Inquiry Datasheet as PDFPrint-ready A4 documentGenerating …Download startedTry again

Chemical composition

9 elements on file · weight %

What this alloy is

Iron — the balance, never listed by a standard — 94.9 %Mn — 1.5 %Cr — 1.4 %Ni — 1 %Traces & impurities · 1.3 %

Logarithmic scale, 0.01 % to 100 % — every value here compares directly, decade by decade.

Element	% by weight
	0.24–0.3
	≤ 0.3
	1.4–1.6
	≤ 0.025
	≤ 0.015
	1.25–1.45
	0.45–0.6
	0.8–1.2
	0.1–0.2

0.01 %0.1 %1 %10 %100 %

The scale is logarithmic, not the element’s raw share of the alloy — the only honest way to fit 0.01 % and 100 % in one picture, and it means every value here can be compared with every other.

Element	As publishedsource text, verbatim	Min% by weight	Max% by weight	Bound
C	0.24-0.3	0.240	0.300	Range
Si	≤0.3	—	0.300	Max
P	≤0.025	—	0.025	Max
S	≤0.015	—	0.015	Max
V	0.1-0.2	0.100	0.200	Range
Cr	1.25-1.45	1.250	1.450	Range
Mn	1.4-1.6	1.400	1.600	Range
Ni	0.8-1.2	0.800	1.200	Range
Mo	0.45-0.6	0.450	0.600	Range

The published column is the source string byte-for-byte, decimal comma and all; Min and Max are the parsed bounds. Elements not listed have no value on file — they are omitted, never inferred.

Predicted transformation temperatures

computed from composition · °C

Predicted Ae3768°C

Predicted Ae1724°C

Predicted Acm550°C

Predicted Bs472°C

These four temperatures are a CALCULATION from this grade's own composition, using the published Li, Niebuhr, Meekisho & Atteridge (1998) model — never a measurement, and computed from the UPPER BOUND of each element's specified range, not a mid-range figure. Where this grade also has a measured transformation point (Ac1, Ac3, Ar1, Ar3) on file, it is shown separately, in Physical & mechanical properties, and is never replaced by the predicted figures here — Ae (predicted, equilibrium) and Ac/Ar (measured, on heating or cooling) are different physical quantities and can differ by tens of degrees; a mismatch between the two is not an error in either.

Physical & mechanical properties

An absent property means we hold no value for it — it is left out rather than estimated, interpolated from a neighbouring grade, or filled from a handbook. It does not mean the property is undefined for the material.

Properties by condition

0 conditions · 0 values

1 further values are held for this grade under a condition the source did not name — a bound with no quantity attached. They are withheld rather than shown against a guessed condition.

Heat treatment

GB /T 1299-2025

Single operationTest specimen

Quenching850–930 °C
Quenchant Oil or Air

Supply condition

QuenchingTest specimen
AnnealingSupply condition

Conditions the standard permits on delivery. No temperature or medium is published for these, so no order and no alternation is implied.

Source: www.caishuku.com

Looking for this grade under another name?

Search the catalogue by designation, material number or composition — every name on this page is itself a way in.

Search Inquiry Datasheet as PDFPrint-ready A4 documentGenerating …Download startedTry again