ML20Al
ML20Al is a designation in GB for the grade also listed as C20E2C. We list 5 designations recorded for this grade, in the standards DIN / EN, ASTM, ISO, JIS and GB.
- Designations 5
Also known as
5 designations · 5 standards · nothing hidden- ML20AlThis grade’s own name
Every designation on file is listed — no truncation, no “+ n more”. Each one is itself a route that leads back here.
Chemical composition
6 elements on file · weight %What this alloy is
Logarithmic scale, 0.01 % to 100 % — every value here compares directly, decade by decade.
| Element | % by weight |
|---|---|
0.18–0.23 | |
≤ 0.1 | |
0.3–0.6 | |
≤ 0.035 | |
≤ 0.035 | |
≥ 0.02 |
The scale is logarithmic, not the element’s raw share of the alloy — the only honest way to fit 0.01 % and 100 % in one picture, and it means every value here can be compared with every other.
| Element | As publishedsource text, verbatim | Min% by weight | Max% by weight | Bound |
|---|---|---|---|---|
| C | 0.18-0.23 | 0.180 | 0.230 | Range |
| Al | ≥0.02 | 0.020 | — | Min |
| Si | ≤0.1 | — | 0.100 | Max |
| P | ≤0.035 | — | 0.035 | Max |
| S | ≤0.035 | — | 0.035 | Max |
| Mn | 0.3-0.6 | 0.300 | 0.600 | Range |
The published column is the source string byte-for-byte, decimal comma and all; Min and Max are the parsed bounds. Elements not listed have no value on file — they are omitted, never inferred.
Predicted transformation temperatures
Not enough recorded composition to predict a transformation temperature for this grade — missing: Ni, Cr, Mo.
Physical & mechanical properties
An absent property means we hold no value for it — it is left out rather than estimated, interpolated from a neighbouring grade, or filled from a handbook. It does not mean the property is undefined for the material.
Properties by condition
3 conditions · 6 valuescaishuku| Diametermm | RmN/mm² |
|---|---|
| ≤ 12 | ≤ 530 |
| ≥ 12 | ≤ 530 |
caishuku| Specimen diametermm | RmN/mm² | ReN/mm² | A% |
|---|---|---|---|
| 25 – 25 | 520 – 820 | ≥ 320 | ≥ 11 |
caishuku| Delivery state | RmN/mm² |
|---|---|
| / | ≤ 490 |
Every figure holds only for the condition on its own row. Values are never merged across conditions or across sources, never averaged, and never interpolated between two rows. An em dash means no value on file — never zero. Figures are converted to the unit in the column header; the source’s own wording is kept and shown where the two differ.
Heat treatment
Supply condition
- Annealing
Conditions the standard permits on delivery. No temperature or medium is published for these, so no order and no alternation is implied.
Source: www.caishuku.com
Looking for this grade under another name?
Search the catalogue by designation, material number or composition — every name on this page is itself a way in.