GOST steel grades — 3544 designations — Page 47
Every grade designated under GOST, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an asserted identity — the same grade under this standard’s own designation. 24 of 50 rows differ and carry an “Indicative” mark.
Also known as
3544 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| El256 Indicative | 1.3802 | Non-magnetic steels | 1.1–1.3 | 6 |
| El256 Indicative | 1.3802 | Non-magnetic steels | 1.05–1.35 | 7 |
| EP182 Indicative | 1.7729 | Others | 0.17–0.23 | 3 |
| EP495-VI Indicative | 2.4617 | Nickel and cobalt alloys | ≤ 0.01 | 4 |
| EP670 /ChN32T Indicative | 1.4876 | Heat resistant steels | ≤ 0.12 | 12 |
| EP670 /ChN32T Indicative | 1.4958 | High-temperature steels | 0.03–0.08 | 6 |
| EP670 /ChN32T Indicative | 1.4959 | High-temperature steels | 0.05–0.1 | 6 |
| EP670 /ChN32T Indicative | 1.4558 | Stainless steels | ≤ 0.03 | 4 |
| EP674 Indicative | 1.4980 | High-temperature steels | 0.03–0.08 | 8 |
| EP674 Indicative | 1.4606 | Others | ≤ 0.08 | 4 |
| EW | — | — | ≤ 0.12 | — |
| EZ25 | — | — | ≤ 0.18 | — |
| EZ35 | — | — | ≤ 0.18 | — |
| F32W | — | — | 0.07–0.12 | — |
| F36SW | — | — | 0.08–0.11 | — |
| F36W | — | — | 0.07–0.11 | — |
| F40SW | — | — | 0.08–0.11 | — |
| F40W | — | — | 0.07–0.11 | — |
| F460W | — | — | 0.08–0.11 | — |
| F500W | — | — | 0.08–0.12 | — |
| FW | — | — | ≤ 0.12 | — |
| G13 Indicative | 1.3401 | Quenched and tempered steels | 1.1–1.3 | 19 |
| G13 Indicative | 1.3402 | Others | 1–1.25 | 4 |
| G13 Indicative | 1.3406 | Others | 0.9–1.05 | 4 |
| G13 Indicative | 1.3802 | Non-magnetic steels | 1.1–1.3 | 6 |
| G13 Indicative | 1.3802 | Non-magnetic steels | 1.05–1.35 | 7 |
| G13A | — | — | 1–1.2 | — |
| GOST5632-2014 Indicative | 2.4683 | Others | 0.05–0.15 | 4 |
| H12 Indicative | 1.2080 | Tool steels for cold work | 1.9–2.2 | 18 |
| H12MF Indicative | 1.2379 | Tool steels for cold work | 1.45–1.6 | 20 |
| HVG Indicative | 1.2419 | Tool steels for cold work | 1–1.1 | 16 |
| K63 | — | — | 0.53–0.73 | — |
| K76 | — | — | 0.71–0.82 | — |
| K76F | — | — | 0.71–0.82 | — |
| K76T | — | — | 0.71–0.82 | — |
| K78KhSF | — | — | 0.74–0.82 | — |
| K86F | — | — | 0.83–0.9 | — |
| KCH30-6 | — | — | 2.6–2.9 | — |
| KCH33-8 | — | — | 2.5–2.9 | — |
| KCH35-10 Indicative | EN-JM1130 | Others | — | 10 |
| KCH37-12 | — | — | 2.4–2.7 | — |
| KCH45-7 Indicative | EN-JM1140 | Others | — | 10 |
| KCH50-5 | — | — | 2.5–2.8 | — |
| KCH55-4 Indicative | EN-JM1160 | Others | — | 8 |
| KCH60-3 | — | — | 2.5–2.8 | — |
| KCH65-3 | — | — | 2.4–2.7 | — |
| KCH70-2 | — | — | 2.4–2.7 | — |
| KCH80-1.5 | — | — | 2.4–2.7 | — |
| KH Indicative | 1.2067 | Tool steels for cold work | 0.95–1.1 | 21 |
| KH12 Indicative | 1.2080 | Tool steels for cold work | 1.9–2.2 | 18 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.