GOST steel grades — 3544 designations — Page 56
Every grade designated under GOST, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an indicative cross-reference, not an asserted identity — the grades are close, not interchangeable. 7 of 50 rows differ and carry a “This grade’s own name” mark.
Also known as
3544 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| Sv-13Kh25T This grade’s own name | — | — | ≤ 0.15 | — |
| Sv-13Kh2MFT | — | — | ≤ 0.08 | — |
| Sv-15GSTYuTsA | 1.1132 | Cold extrusion steels | 0.13–0.17 | 5 |
| Sv-18KhGS | 1.7131 | Case hardening steels | 0.14–0.19 | 24 |
| Sv-18KhMA | 1.7131 | Case hardening steels | 0.14–0.19 | 24 |
| Sv-20GSTYuA | 1.1152 | Cold extrusion steels | 0.18–0.22 | 4 |
| Sv-20Kh13 | 1.4021 | Stainless steels | 0.16–0.25 | 18 |
| Sv-30Kh15N35V3BT This grade’s own name | — | — | 0.27–0.33 | — |
| Sv-30Kh25N16G7 This grade’s own name | — | — | 0.25–0.33 | — |
| Sw-01Ch19N9 | 1.4316 | Stainless steels | ≤ 0.02 | 5 |
| T60 | 1.0601 | Quenched and tempered steels | 0.57–0.65 | 25 |
| U10 | 1.1535 | Unalloyed tool steels / carbon steels | 0.85–0.95 | 14 |
| U10 | 1.1645 | Unalloyed tool steels / carbon steels | 1–1.1 | 18 |
| U10A | 1.1545 | Unalloyed tool steels / carbon steels | 1–1.1 | 19 |
| U10A | 1.1645 | Unalloyed tool steels / carbon steels | 1–1.1 | 18 |
| U10А | 1.1545 | Unalloyed tool steels / carbon steels | 1–1.1 | 19 |
| U11 | 1.1545 | Unalloyed tool steels / carbon steels | 1–1.1 | 19 |
| U11А | 1.1545 | Unalloyed tool steels / carbon steels | 1–1.1 | 19 |
| u12 | 1.1555 | Unalloyed tool steels / carbon steels | 1.15–1.25 | 16 |
| U12 | 1.1554 | Unalloyed tool steels / carbon steels | 1–1.1 | 4 |
| U12A | 1.1554 | Unalloyed tool steels / carbon steels | 1–1.1 | 4 |
| U13 | 1.1563 | Unalloyed tool steels / carbon steels | 1.2–1.35 | 13 |
| U13А This grade’s own name | — | — | 1.26–1.34 | — |
| U7 | 1.1520 | Unalloyed tool steels / carbon steels | 0.65–0.75 | 11 |
| U7 | 1.1620 | Unalloyed tool steels / carbon steels | 0.65–0.74 | 14 |
| U7A | 1.1620 | Unalloyed tool steels / carbon steels | 0.65–0.74 | 14 |
| U8 | 1.1525 | Unalloyed tool steels / carbon steels | 0.75–0.85 | 20 |
| U8 | 1.1625 | Unalloyed tool steels / carbon steels | 0.75–0.85 | 15 |
| U8A | 1.1525 | Unalloyed tool steels / carbon steels | 0.75–0.85 | 20 |
| U8A | 1.1625 | Unalloyed tool steels / carbon steels | 0.75–0.85 | 15 |
| U8G | 1.1525 | Unalloyed tool steels / carbon steels | 0.75–0.85 | 20 |
| U8GА This grade’s own name | — | — | 0.8–0.9 | — |
| U8А This grade’s own name | — | — | 0.75–0.84 | — |
| U9 | 1.1525 | Unalloyed tool steels / carbon steels | 0.75–0.85 | 20 |
| U9A | 1.1535 | Unalloyed tool steels / carbon steels | 0.85–0.95 | 14 |
| U9А | 1.1830 | Unalloyed tool steels / carbon steels | 0.8–0.9 | 10 |
| V2F | 1.0308 | Unalloyed structural steels | ≤ 0.17 | 10 |
| VCH100 This grade’s own name | — | — | 3.2–3.6 | — |
| VCH35 | 1.1172 | Cold extrusion steels | 0.32–0.39 | 5 |
| VCH40 | EN-JS1030 | Others | — | 17 |
| VCH40 | EN-JS1072 | Others | — | 17 |
| VCH40 | EN-JS1073 | Others | — | 17 |
| VCH45 | 1.1192 | Cold extrusion steels | 0.42–0.5 | 2 |
| VCH50 | EN-JS1082 | Others | — | 20 |
| VCH50 | EN-JS1083 | Others | — | 20 |
| VCH60 | EN-JS1060 | Others | — | 20 |
| VCH60 | EN-JS1092 | Others | — | 20 |
| VCH60 | EN-JS1093 | Others | — | 20 |
| VCH70 | EN-JS1102 | Others | — | 21 |
| VCH70 | EN-JS1103 | Others | — | 21 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.