JIS steel grades — 2322 designations — Page 47
Every grade designated under JIS, with the identifying and comparative data we hold for each. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an asserted identity — the same grade under this standard’s own designation. 6 of 22 rows differ and carry an “Indicative” mark.
Also known as
2322 designations| Grade | C% by weight |
|---|---|
| SWRS75A | 0.73–0.78 |
| SWRS75B | 0.73–0.78 |
| SWRS77A | 0.75–0.8 |
| SWRS77B | 0.75–0.8 |
| SWRS80A | 0.78–0.83 |
| SWRS80B | 0.78–0.83 |
| SWRS82A | 0.8–0.85 |
| SWRS82B | 0.8–0.85 |
| SWRS87A | 0.85–0.9 |
| SWRS87B | 0.85–0.9 |
| SWRS92A | 0.9–0.95 |
| SWRS92B | 0.9–0.95 |
| SWRY11 | ≤ 0.09 |
| SWRY21 | 0.1–0.15 |
| SWY11 | ≤ 0.09 |
| SWY21 | 0.1–0.15 |
| TE-2 Indicative | 1.2–1.3 |
| TE-2 Indicative | 1.2–1.3 |
| TS 15510 L-No Indicative | — |
| XM-7 Indicative | ≤ 0.035 |
| XM-7 Indicative | ≤ 0.04 |
| zbliżony do SKS93 Indicative | 0.85–0.95 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.