SCH47
SCH47 is a material in the category Heat-resistant cast steels. Its recorded composition includes C ≤ 0.5%, Si ≤ 1%, Cr 25–30%, Fe ≤ 20% and Co 48–52%. No cross-standard equivalents are recorded for this grade yet.
- Category Heat-resistant cast steels · 82 grades
- Designations 1
About Heat-resistant cast steels
Heat-resistant cast steels are cast ferrous alloys formulated for service at elevated temperatures, where resistance to softening and thermal degradation is important. They are used for furnace components, heat-treatment equipment and other high-temperature plant parts that require cast shapes and dependable mechanical performance during heating.
This describes the material class as a whole. Always confirm the individual grade against the standard before ordering.
Chemical composition
10 elements on file · weight %What this alloy is
Logarithmic scale, 0.01 % to 100 % — every value here compares directly, decade by decade.
| Element | % by weight |
|---|---|
≤ 0.5 | |
≤ 1 | |
≤ 1 | |
≤ 0.04 | |
≤ 0.03 | |
25–30 | |
≤ 0.5 | |
≤ 1 | |
48–52 — | |
≤ 20 |
The scale is logarithmic, not the element’s raw share of the alloy — the only honest way to fit 0.01 % and 100 % in one picture, and it means every value here can be compared with every other.
| Element | As publishedsource text, verbatim | Min% by weight | Max% by weight | Bound |
|---|---|---|---|---|
| C | max 0.5 | — | 0.500 | Max |
| Si | max 1 | — | 1.000 | Max |
| P | max 0.04 | — | 0.040 | Max |
| S | max 0.03 | — | 0.030 | Max |
| Cr | 25 - 30 | 25.000 | 30.000 | Range |
| Mn | max 1 | — | 1.000 | Max |
| Fe | max 20 | — | 20.000 | Max |
| Co | 48 - 52 | 48.000 | 52.000 | Range |
| Ni | max 1 | — | 1.000 | Max |
| Mo | max 0.5 | — | 0.500 | Max |
The published column is the source string byte-for-byte, decimal comma and all; Min and Max are the parsed bounds. Elements not listed have no value on file — they are omitted, never inferred.
Predicted transformation temperatures
This grade's composition falls outside the published model's validated range (a low-alloy composition window), so no transformation temperature is predicted here.
Physical & mechanical properties
An absent property means we hold no value for it — it is left out rather than estimated, interpolated from a neighbouring grade, or filled from a handbook. It does not mean the property is undefined for the material.
Looking for this grade under another name?
Search the catalogue by designation, material number or composition — every name on this page is itself a way in.