KS steel grades — 823 designations
Every grade designated under KS, with the identifying and comparative data we hold for each. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an asserted identity — the same grade under this standard’s own designation. 3 of 50 rows differ and carry an “Indicative” mark.
Also known as
823 designations| Grade | Category | C% by weight |
|---|---|---|
| CF10 | Heat-resistant cast steels | 0.04–0.1 |
| CF10M | Heat-resistant cast steels | 0.04–0.1 |
| CF10MC | Heat-resistant cast steels | — |
| CF10SMnN | Heat-resistant cast steels | ≤ 0.01 |
| HRS1 | Sheet metal and slit strip | ≤ 0.1 |
| HRS2 | Sheet metal and slit strip | ≤ 0.18 |
| HRS3 | Sheet metal and slit strip | ≤ 0.25 |
| HRS4 | Sheet metal and slit strip | ≤ 0.3 |
| HRSC13A Indicative | Heat-resistant cast steels | 0.3–0.5 |
| HRSC16 | Heat-resistant cast steels | 0.2–0.35 |
| HRSC17 Indicative | Heat-resistant cast steels | 0.3–0.5 |
| HRSC21 | Heat-resistant cast steels | 0.25–0.35 |
| HRSC22 | — | 0.35–0.45 |
| HSWR27 | — | 0.24–0.31 |
| HSWR32 | — | 0.29–0.36 |
| HSWR37 | — | 0.34–0.41 |
| HSWR42A | — | 0.39–0.46 |
| HSWR42B | — | 0.39–0.46 |
| HSWR47A | — | 0.44–0.51 |
| HSWR47B | — | 0.44–0.51 |
| HSWR52A | — | 0.49–0.56 |
| HSWR52B | — | 0.49–0.56 |
| HSWR57A | — | 0.54–0.61 |
| HSWR57B | — | 0.54–0.61 |
| HSWR62A | — | 0.59–0.66 |
| HSWR62B | — | 0.59–0.66 |
| HSWR67A | — | 0.64–0.71 |
| HSWR67B | — | 0.64–0.71 |
| HSWR72A | — | 0.69–0.76 |
| HSWR72B | — | 0.69–0.76 |
| HSWR77A | — | 0.74–0.81 |
| HSWR77B | — | 0.74–0.81 |
| HSWR82A | — | 0.79–0.86 |
| HSWR82B | — | 0.79–0.86 |
| Incoloy800 | Nickel and cobalt alloys | — |
| Inconel600 | Nickel and cobalt alloys | ≤ 0.15 |
| Inconel718 | Nickel and cobalt alloys | — |
| InconelX750 | Nickel and cobalt alloys | — |
| NCF600 | Nickel and cobalt alloys | ≤ 0.15 |
| NCF600TB | Nickel and cobalt alloys | ≤ 0.15 |
| NCF600TP | Nickel and cobalt alloys | ≤ 0.15 |
| NCF601 | Nickel and cobalt alloys | ≤ 0.1 |
| NCF625 | Nickel and cobalt alloys | ≤ 0.1 |
| NCF625TB | Nickel and cobalt alloys | ≤ 0.1 |
| NCF625TP | Nickel and cobalt alloys | ≤ 0.1 |
| NCF690 | Nickel and cobalt alloys | ≤ 0.05 |
| NCF690TB | Nickel and cobalt alloys | ≤ 0.05 |
| NCF690TP | Nickel and cobalt alloys | ≤ 0.05 |
| NCF718 | Nickel and cobalt alloys | ≤ 0.08 |
| NCF718 Indicative | High-temperature steels | 0.02–0.08 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.