Material number · Europe · 2 designations

1.5417

1.5417 is the material number of the grade also listed as 26Mo2. It is a material in the category Heat-resistant structural steels. We list 2 designations recorded for this grade, in the standards DIN / EN and BS.

Material no. 1.5417
Category Heat-resistant structural steels · 62 grades
Designations 2

Search Inquiry Datasheet as PDFPrint-ready A4 documentGenerating …Download startedTry again

If you came for one of these

The most-used names for this grade.

DIN / EN26Mo2This grade’s own name

About Heat-resistant structural steels

Heat-resistant structural steels are structural steels designed to retain useful strength and dimensional stability at elevated temperatures. They are used for load-bearing components in hot-service equipment where mechanical performance must be maintained during heating.

This describes the material class as a whole. Always confirm the individual grade against the standard before ordering.

Also known as

2 designations · 2 standards · nothing hidden

This grade’s own namerecorded in our sources as this grade’s own designation under that standard.

Indicativetaken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.

Withdrawndesignation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.

DIN / ENEurope · 1

26Mo2This grade’s own name

BSUnited Kingdom · 1

CFS9Indicative

Every designation on file is listed — no truncation, no “+ n more”. Each one is itself a route that leads back here.

Chemical composition

7 elements on file · weight %

What this alloy is

Iron — the balance, never listed by a standard — 97.2 %Mn — 1.5 %Si — 0.4 %Ni — 0.4 %Traces & impurities · 0.5 %

Logarithmic scale, 0.01 % to 100 % — every value here compares directly, decade by decade.

Element	% by weight
	0.22–0.29
	≤ 0.4
	≤ 1.5
	0.035
	0.03
	0.15–0.25
	0.4

0.01 %0.1 %1 %10 %100 %

The scale is logarithmic, not the element’s raw share of the alloy — the only honest way to fit 0.01 % and 100 % in one picture, and it means every value here can be compared with every other.

Element	As publishedsource text, verbatim	Min% by weight	Max% by weight	Bound
C	0,22-0,29	0.220	0.290	Range
Si	≤0,40	—	0.400	Max
P	0,035	0.035	0.035	Exact
S	0,03	0.030	0.030	Exact
Mn	≤1,50	—	1.500	Max
Ni	0,4	0.400	0.400	Exact
Mo	0,15-0,25	0.150	0.250	Range

The published column is the source string byte-for-byte, decimal comma and all; Min and Max are the parsed bounds. Elements not listed have no value on file — they are omitted, never inferred.

Predicted transformation temperatures

Not enough recorded composition to predict a transformation temperature for this grade — missing: Cr.

Physical & mechanical properties

Density7,85g/cm³Exact

An absent property means we hold no value for it — it is left out rather than estimated, interpolated from a neighbouring grade, or filled from a handbook. It does not mean the property is undefined for the material.

Similar grades — and why

Selection rule, stated so you can disagree with it: same number class 1.5, a shared category, and a published range for Mn / Ni that overlaps this grade’s. These are neighbours in composition space — they are not equivalents, and none is claimed to be interchangeable with this grade.

G20Mo51.5419

Mn 0,50-1,00 · Ni 0,4