Material number · Europe · 1 designation

1.5431

1.5431 is the material number of the grade also listed as G12MnMo7-4. It is a material in the category Heat-resistant structural steels. We list 1 designations recorded for this grade, in the standards DIN / EN.

Material no. 1.5431
Category Heat-resistant structural steels · 62 grades
Designations 1

Search Inquiry Datasheet as PDFPrint-ready A4 documentGenerating …Download startedTry again

If you came for one of these

The most-used names for this grade.

DIN / ENG12MnMo7-4This grade’s own name

About Heat-resistant structural steels

Heat-resistant structural steels are structural steels designed to retain useful strength and dimensional stability at elevated temperatures. They are used for load-bearing components in hot-service equipment where mechanical performance must be maintained during heating.

This describes the material class as a whole. Always confirm the individual grade against the standard before ordering.

Also known as

1 designations · 1 standards · nothing hidden

This grade’s own namerecorded in our sources as this grade’s own designation under that standard.

Indicativetaken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.

Withdrawndesignation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.

DIN / ENEurope · 1

G12MnMo7-4This grade’s own name

Every designation on file is listed — no truncation, no “+ n more”. Each one is itself a route that leads back here.

Chemical composition

10 elements on file · weight %

What this alloy is

Iron — the balance, never listed by a standard — 96.9 %Mn — 1.7 %Si — 0.6 %Mo — 0.4 %Traces & impurities · 0.5 %

Logarithmic scale, 0.01 % to 100 % — every value here compares directly, decade by decade.

Element	% by weight
	0.08–0.15
	≤ 0.6
	1.5–1.8
	0.02
	0.015
	≤ 0.2
	0.3–0.4
	≤ 0.1
	≤ 0.05
	0.02

0.01 %0.1 %1 %10 %100 %

The scale is logarithmic, not the element’s raw share of the alloy — the only honest way to fit 0.01 % and 100 % in one picture, and it means every value here can be compared with every other.

Element	As publishedsource text, verbatim	Min% by weight	Max% by weight	Bound
C	0,08-0,15	0.080	0.150	Range
N	0,02	0.020	0.020	Exact
Si	≤0,60	—	0.600	Max
P	0,02	0.020	0.020	Exact
S	0,015	0.015	0.015	Exact
V	≤0,10	—	0.100	Max
Cr	≤0,20	—	0.200	Max
Mn	1,50-1,80	1.500	1.800	Range
Nb	≤0,05	—	0.050	Max
Mo	0,30-0,40	0.300	0.400	Range

The published column is the source string byte-for-byte, decimal comma and all; Min and Max are the parsed bounds. Elements not listed have no value on file — they are omitted, never inferred.

Predicted transformation temperatures

Not enough recorded composition to predict a transformation temperature for this grade — missing: Ni.

Physical & mechanical properties

Density7,85g/cm³Exact

An absent property means we hold no value for it — it is left out rather than estimated, interpolated from a neighbouring grade, or filled from a handbook. It does not mean the property is undefined for the material.

Similar grades — and why

Selection rule, stated so you can disagree with it: same number class 1.5, a shared category, and a published range for Mn / Mo that overlaps this grade’s. These are neighbours in composition space — they are not equivalents, and none is claimed to be interchangeable with this grade.

G8MnMo7-41.5430

Mn 1,50-1,80 · Mo 0,30-0,40