ÖNORM steel grades — 169 designations
Every grade designated under ÖNORM, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Every name on this page is an indicative cross-reference, not an asserted identity: the grades are close, not interchangeable. Check the composition before you substitute.
Also known as
169 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| 10CrMo9-10KW | 1.7380 | Heat-resistant structural steels | 0.08–0.14 | 20 |
| 13CrMo4-4KW | 1.7262 | Case hardening steels | 0.13–0.17 | 18 |
| 13CrMo4-4KW | 1.7335 | Heat-resistant structural steels | 0.08–0.18 | 22 |
| 15Mo3KW | 1.5415 | Heat-resistant structural steels | 0.12–0.2 | 15 |
| 17Mn4KW | 1.0436 | Fine-grain structural steels | 0.15–0.2 | 14 |
| 17Mn4KW | 1.0481 | Heat-resistant structural steels | 0.08–0.2 | 17 |
| 24CrMoV5-5 | 1.7733 | Heat-resistant structural steels | 0.2–0.28 | 15 |
| 25CrMo5S | 1.7218 | Quenched and tempered steels | 0.22–0.29 | 25 |
| 41Cr4SP | 1.7034 | Quenched and tempered steels | 0.34–0.41 | 23 |
| 42CrMo4SP | 1.7225 | Quenched and tempered steels | 0.38–0.45 | 25 |
| BOHLERB400 | 1.2235 | Tool steels for cold work | 0.75–0.85 | 13 |
| BOHLERK100 | 1.2060 | Tool steels for cold work | 1–1.1 | 15 |
| BOHLERK110 | 1.2379 | Tool steels for cold work | 1.45–1.6 | 20 |
| BOHLERK200 | 1.2067 | Tool steels for cold work | 0.95–1.1 | 21 |
| BOHLERK305 | 1.2363 | Tool steels for cold work | 0.95–1.05 | 16 |
| BOHLERK460 | 1.2825 | Tool steels for cold work | 0.9–1 | 13 |
| BOHLERK700 | 1.3401 | Quenched and tempered steels | 1.1–1.3 | 19 |
| BOHLERK990 | 1.1645 | Unalloyed tool steels / carbon steels | 1–1.1 | 18 |
| BOHLERK990 | 1.1545 | Unalloyed tool steels / carbon steels | 1–1.1 | 19 |
| BOHLERM130 | 1.6657 | Special steels for aviation and aerospace | 0.11–0.17 | 15 |
| BOHLERN100 | 1.4006 | Stainless steels | 0.08–0.15 | 26 |
| BOHLERS200 | 1.3355 | High-speed steels | 0.73–0.83 | 22 |
| BOHLERS600 | 1.3343 | High-speed steels | 0.86–0.94 | 19 |
| BOHLERS705 | 1.3243 | High-speed steels | 0.87–0.95 | 19 |
| BOHLERV155 | 1.6582 | Quenched and tempered steels | 0.3–0.38 | 25 |
| BOHLERV320 | 1.7225 | Quenched and tempered steels | 0.38–0.45 | 25 |
| BOHLERV330 | 1.7220 | Quenched and tempered steels | 0.3–0.37 | 24 |
| BOHLERV330 | 1.7218 | Quenched and tempered steels | 0.22–0.29 | 25 |
| BOHLERV340 | 1.7220 | Quenched and tempered steels | 0.3–0.37 | 24 |
| BOHLERV340 | 1.7218 | Quenched and tempered steels | 0.22–0.29 | 25 |
| BOHLERV960 | 1.0601 | Quenched and tempered steels | 0.57–0.65 | 25 |
| BOHLERW100 | 1.2581 | Tool steels for hot work | 0.25–0.35 | 18 |
| BOHLERW105 | 1.2567 | Tool steels for hot work | 0.25–0.35 | 9 |
| BOHLERW300 | 1.2343 | Tool steels for hot work | 0.33–0.41 | 20 |
| BOHLERW320 | 1.2365 | Tool steels for hot work | 0.28–0.35 | 18 |
| C35 | 1.0501 | Quenched and tempered steels | 0.32–0.39 | 23 |
| C35SW | 1.0501 | Quenched and tempered steels | 0.32–0.39 | 23 |
| C45SW | 1.0503 | Quenched and tempered steels | 0.42–0.5 | 24 |
| Ck35S | 1.0501 | Quenched and tempered steels | 0.32–0.39 | 23 |
| G-X8CrNi12 | 1.4107 | Cast stainless steels | ≤ 0.1 | 4 |
| GG100 | EN-JL1010 | Others | — | 16 |
| GG15 | EN-JL1020 | Others | — | 22 |
| GG150 | EN-JL1020 | Others | — | 22 |
| GG20 | EN-JL1030 | Others | — | 22 |
| GG200 | EN-JL1030 | Others | — | 22 |
| GG25 | EN-JL1040 | Others | — | 22 |
| GG250 | EN-JL1040 | Others | — | 22 |
| GG30 | EN-JL1050 | Others | — | 22 |
| GG300 | EN-JL1050 | Others | — | 22 |
| GG35 | EN-JL1060 | Others | — | 21 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.