PN steel grades — 635 designations — Page 11
Every grade designated under PN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Every name on this page is an indicative cross-reference, not an asserted identity: the grades are close, not interchangeable. Check the composition before you substitute.
Also known as
635 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| NMWV | 1.2825 | Tool steels for cold work | 0.9–1 | 13 |
| NMWV | 1.2510 | Tool steels for cold work | 0.9–1.05 | 13 |
| NPW | 1.2767 | Tool steels for cold work | 0.4–0.5 | 9 |
| NPW | 1.2766 | Tool steels for hot work | 0.32–0.38 | 5 |
| NV | 1.2833 | Tool steels for cold work | 0.95–1.05 | 7 |
| NW1 | 1.2414 | Tool steels for cold work | 1.15–1.25 | 3 |
| NW1 | 1.2210 | Tool steels for cold work | 1.1–1.25 | 13 |
| NWC | 1.2419 | Tool steels for cold work | 1–1.1 | 16 |
| NZ2 | 1.2542 | Tool steels for cold work | 0.4–0.5 | 12 |
| NZ2 | 1.2550 | Tool steels for cold work | 0.55–0.65 | 15 |
| NZ3 | 1.2550 | Tool steels for cold work | 0.55–0.65 | 15 |
| NZ3 | 1.2542 | Tool steels for cold work | 0.4–0.5 | 12 |
| NZ4 | 1.2360 | Tool steels for hot work | 0.45–0.5 | 3 |
| OH13 | 1.4000 | Stainless steels | ≤ 0.08 | 16 |
| OOH17N14M2 | 1.4404 | Stainless steels | ≤ 0.03 | 25 |
| P40 | 1.0511 | Quenched and tempered steels | 0.37–0.44 | 21 |
| R35 | 1.0301 | Case hardening steels | 0.07–0.13 | 20 |
| R55 | 1.0507 | Others | ≤ 0.2 | 8 |
| SK10V | 1.3207 | High-speed steels | 1.2–1.35 | 14 |
| SK5M | 1.3243 | High-speed steels | 0.87–0.95 | 19 |
| SK5V | 1.3202 | High-speed steels | 1.3–1.45 | 12 |
| SK8M | 1.3247 | High-speed steels | 1.05–1.15 | 14 |
| SS400 | 1.0036 | Unalloyed structural steels | ≤ 0.17 | 20 |
| SS400 | 1.0036 | Unalloyed structural steels | ≤ 0.17 | 19 |
| St0S | 1.0035 | Unalloyed structural steels | — | 22 |
| St0S | 1.0034 | Unalloyed structural steels | ≤ 0.15 | 12 |
| St36K | 1.0345 | Heat-resistant structural steels | ≤ 0.16 | 18 |
| St36K | 1.0460 | Heat-resistant structural steels | 0.18–0.23 | 4 |
| St36K | 1.0425 | Heat-resistant structural steels | ≤ 0.2 | 20 |
| St3M | 1.0426 | Aging resistant steels | 0.08–0.2 | 17 |
| St3S | 1.0038 | Unalloyed structural steels | ≤ 0.17 | 26 |
| St3S | 1.0037 | Unalloyed structural steels | ≤ 0.17 | 7 |
| St3S | 1.0037 | Unalloyed structural steels | ≤ 0.17 | 4 |
| St3SX | 1.0040 | Unalloyed structural steels | ≤ 0.25 | 8 |
| St3SX | 1.0038 | Unalloyed structural steels | ≤ 0.17 | 26 |
| St3SX | 1.0036 | Unalloyed structural steels | ≤ 0.17 | 20 |
| St3SX | 1.0036 | Unalloyed structural steels | ≤ 0.17 | 19 |
| St3SX | 1.0028 | Unalloyed structural steels | ≤ 0.15 | 18 |
| St3SX | 1.0037 | Unalloyed structural steels | ≤ 0.17 | 7 |
| St3SX | 1.0037 | Unalloyed structural steels | ≤ 0.17 | 4 |
| St3SY | 1.0038 | Unalloyed structural steels | ≤ 0.17 | 26 |
| St3SY | 1.0036 | Unalloyed structural steels | ≤ 0.17 | 20 |
| St3SY | 1.0036 | Unalloyed structural steels | ≤ 0.17 | 19 |
| St3V | 1.0038 | Unalloyed structural steels | ≤ 0.17 | 26 |
| St3V St3VY | 1.0038 | Unalloyed structural steels | ≤ 0.17 | 26 |
| St3VY | 1.0038 | Unalloyed structural steels | ≤ 0.17 | 26 |
| St3W | 1.0038 | Unalloyed structural steels | ≤ 0.17 | 26 |
| St3W | 1.0036 | Unalloyed structural steels | ≤ 0.17 | 20 |
| St3W | 1.0036 | Unalloyed structural steels | ≤ 0.17 | 19 |
| St3W | 1.0028 | Unalloyed structural steels | ≤ 0.15 | 18 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.