PN steel grades — 635 designations — Page 3
Every grade designated under PN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Every name on this page is an indicative cross-reference, not an asserted identity: the grades are close, not interchangeable. Check the composition before you substitute.
Also known as
635 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| 18G2A | 1.0562 | Fine-grain structural steels | ≤ 0.18 | 18 |
| 18G2A | 1.0045 | Unalloyed structural steels | ≤ 0.24 | 17 |
| 18G2A | 1.0553 | Unalloyed structural steels | ≤ 0.2 | 20 |
| 18G2A | 1.0565 | Fine-grain structural steels | ≤ 0.18 | 7 |
| 18G2A | 1.0566 | Fine-grain structural steels | ≤ 0.18 | 11 |
| 18G2AA | 1.0570 | Unalloyed structural steels | ≤ 0.2 | 22 |
| 18G2AA | 1.0570 | Unalloyed structural steels | ≤ 0.2 | 20 |
| 18G2ACu | 1.0570 | Unalloyed structural steels | ≤ 0.2 | 22 |
| 18G2ACu | 1.0570 | Unalloyed structural steels | ≤ 0.2 | 20 |
| 18G2AV | 1.8902 | Fine-grain structural steels | ≤ 0.2 | 19 |
| 18G2AV | 1.8905 | Fine-grain structural steels | ≤ 0.2 | 14 |
| 18G2AV | 1.5218 | Others | 0.2–0.23 | 13 |
| 18H2N2 | 1.5920 | Case hardening steels | 0.15–0.2 | 6 |
| 18H2N4WA | 1.6657 | Special steels for aviation and aerospace | 0.11–0.17 | 15 |
| 18H2N4WA | 1.2764 | Tool steels for cold work | 0.16–0.22 | 3 |
| 18HGM | 1.7218 | Quenched and tempered steels | 0.22–0.29 | 25 |
| 18HGM | 1.7262 | Case hardening steels | 0.13–0.17 | 18 |
| 18HGM | 1.7243 | Case hardening steels | 0.15–0.21 | 12 |
| 18HGM | 1.3566 | Others | 0.12–0.18 | 8 |
| 18HGT | 1.7131 | Case hardening steels | 0.14–0.19 | 24 |
| 18HGT | 1.7147 | Case hardening steels | 0.17–0.22 | 15 |
| 18HGT 20HG | 1.7147 | Case hardening steels | 0.17–0.22 | 15 |
| 19G2 | 1.0482 | Heat-resistant structural steels | 0.17–0.22 | 3 |
| 19G2FA | 1.5218 | Others | 0.2–0.23 | 13 |
| 1H13 | 1.4006 | Stainless steels | 0.08–0.15 | 26 |
| 1H13 | 1.4005 | Stainless steels | 0.08–0.15 | 14 |
| 1H13 | 1.4024 | Stainless steels | 0.12–0.17 | 13 |
| 1H17N4G9 | 1.3965 | Non-magnetic steels | ≤ 0.1 | 9 |
| 1H17N4G9 | 1.4372 | Others | ≤ 0.15 | 10 |
| 1H17N4G9 | 1.4373 | Non-magnetic steels | ≤ 0.15 | 13 |
| 1H18N10T | 1.4541 | Stainless steels | ≤ 0.08 | 25 |
| 1H18N10T | 1.4878 | Heat resistant steels | ≤ 0.1 | 14 |
| 1H18N12T | 1.4541 | Stainless steels | ≤ 0.08 | 25 |
| 1H18N12T | 1.4878 | Heat resistant steels | ≤ 0.1 | 14 |
| 1H18N9 | 1.4300 | Stainless steels | ≤ 0.12 | 15 |
| 1H18N9 | 1.4310 | Stainless steels | 0.05–0.15 | 18 |
| 1H18N9 | 1.4305 | Stainless steels | ≤ 0.1 | 17 |
| 1H18N9 | 1.4325 | Stainless steels | 0.03–0.15 | 11 |
| 1H18N9T | 1.4541 | Stainless steels | ≤ 0.08 | 25 |
| 1H18N9T | 1.4878 | Heat resistant steels | ≤ 0.1 | 14 |
| 1H18N9T lub 0H18N10T 1H18N10T | 1.4541 | Stainless steels | ≤ 0.08 | 25 |
| 20 | 1.1149 | Quenched and tempered steels | 0.17–0.24 | 7 |
| 20 | 1.0402 | Quenched and tempered steels | 0.17–0.24 | 24 |
| 20 | 1.1151 | Quenched and tempered steels | 0.17–0.24 | 15 |
| 20G | 1.0406 | Quenched and tempered steels | 0.22–0.29 | 20 |
| 20G | 1.1133 | Quenched and tempered steels | 0.17–0.23 | 20 |
| 20H | 1.7027 | Case hardening steels | 0.17–0.23 | 12 |
| 20H12M1F | 1.4922 | High-temperature steels | 0.17–0.23 | 7 |
| 20H12MIF | 1.4923 | High-temperature steels | 0.18–0.24 | 5 |
| 20HG | 1.7131 | Case hardening steels | 0.14–0.19 | 24 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.