UNS · United States · 2 designations

J92810

J92810 is a designation in UNS for the material held under material number 1.4437, also listed as GX6CrNiMo18-12. It is a material in the category Cast stainless steels. We list 2 designations recorded for this grade, in the standards DIN / EN and UNS.

Material no. 1.4437
Category Cast stainless steels · 87 grades
Designations 2

Search Inquiry Datasheet as PDFPrint-ready A4 documentGenerating …Download startedTry again

If you came for one of these

The most-used names for this grade.

DIN / ENGX6CrNiMo18-12This grade’s own name

About Cast stainless steels

Cast stainless steels are stainless-steel materials produced by casting, combining corrosion resistance with the ability to form complex component shapes. Their composition and mechanical behaviour vary by grade, and they are used for corrosion-resistant cast components such as pumps, valves and process equipment.

This describes the material class as a whole. Always confirm the individual grade against the standard before ordering.

Also known as

2 designations · 2 standards · nothing hidden

This grade’s own namerecorded in our sources as this grade’s own designation under that standard.

Indicativetaken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.

Withdrawndesignation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.

DIN / ENEurope · 1

GX6CrNiMo18-12This grade’s own name

UNSUnited States · 1

J92810This grade’s own name

Every designation on file is listed — no truncation, no “+ n more”. Each one is itself a route that leads back here.

Chemical composition

8 elements on file · weight %

What this alloy is

Iron — the balance, never listed by a standard — 63.1 %Cr — 17.5 %Ni — 12.5 %Mo — 2.8 %Traces & impurities · 4.1 %

Logarithmic scale, 0.01 % to 100 % — every value here compares directly, decade by decade.

Element	% by weight
	≤ 0.07
	≤ 2
	≤ 2
	0.045
	0.03
	16.5–18.5
	2.5–3
	11.5–13.5

0.01 %0.1 %1 %10 %100 %

The scale is logarithmic, not the element’s raw share of the alloy — the only honest way to fit 0.01 % and 100 % in one picture, and it means every value here can be compared with every other.

Element	As publishedsource text, verbatim	Min% by weight	Max% by weight	Bound
C	≤0,07	—	0.070	Max
Si	≤2,00	—	2.000	Max
P	0,045	0.045	0.045	Exact
S	0,03	0.030	0.030	Exact
Cr	16,5-18,5	16.500	18.500	Range
Mn	≤2,00	—	2.000	Max
Ni	11,5-13,5	11.500	13.500	Range
Mo	2,50-3,00	2.500	3.000	Range

The published column is the source string byte-for-byte, decimal comma and all; Min and Max are the parsed bounds. Elements not listed have no value on file — they are omitted, never inferred.

Predicted transformation temperatures

This grade's composition falls outside the published model's validated range (a low-alloy composition window), so no transformation temperature is predicted here.

Physical & mechanical properties

Density7,85g/cm³Exact

An absent property means we hold no value for it — it is left out rather than estimated, interpolated from a neighbouring grade, or filled from a handbook. It does not mean the property is undefined for the material.

Similar grades — and why

Selection rule, stated so you can disagree with it: same number class 1.4, a shared category, and a published range for Cr / Ni that overlaps this grade’s. These are neighbours in composition space — they are not equivalents, and none is claimed to be interchangeable with this grade.

1.45831.4583

Cr 16,5-18,5 · Ni 12,0-14,5