S11800
S11800 is a designation in UNS for the material held under material number 1.4530, also listed as X1CrNiMoAlTi12-9-2. It is a material in the category Others. We list 2 designations recorded for this grade, in the standards DIN / EN and UNS.
- Material no. 1.4530
- Category Others · 1754 grades
- Designations 2
If you came for one of these
The most-used names for this grade.About Others
These are miscellaneous metallic alloys that do not fit a more specific material family and may be based on iron, nickel, cobalt, copper or other alloy systems. They are selected for applications requiring particular combinations of strength, hardness, toughness, wear resistance or resistance to demanding service conditions.
This describes the material class as a whole. Always confirm the individual grade against the standard before ordering.
Also known as
2 designations · 2 standards · nothing hidden- S11800This grade’s own name
Every designation on file is listed — no truncation, no “+ n more”. Each one is itself a route that leads back here.
Chemical composition
11 elements on file · weight %What this alloy is
Logarithmic scale, 0.01 % to 100 % — every value here compares directly, decade by decade.
| Element | % by weight |
|---|---|
≤ 0.015 | |
≤ 0.1 | |
≤ 0.1 | |
0.01 | |
0.005 | |
11.5–12.5 | |
1.85–2.15 | |
8.5–9.5 | |
0.6–0.8 | |
0.28–0.37 | |
0.01 |
The scale is logarithmic, not the element’s raw share of the alloy — the only honest way to fit 0.01 % and 100 % in one picture, and it means every value here can be compared with every other.
| Element | As publishedsource text, verbatim | Min% by weight | Max% by weight | Bound |
|---|---|---|---|---|
| C | ≤0,015 | — | 0.015 | Max |
| N | 0,01 | 0.010 | 0.010 | Exact |
| Al | 0,60-0,80 | 0.600 | 0.800 | Range |
| Si | ≤0,10 | — | 0.100 | Max |
| P | 0,01 | 0.010 | 0.010 | Exact |
| S | 0,005 | 0.005 | 0.005 | Exact |
| Ti | 0,28-0,37 | 0.280 | 0.370 | Range |
| Cr | 11,5-12,5 | 11.500 | 12.500 | Range |
| Mn | ≤0,10 | — | 0.100 | Max |
| Ni | 8,50-9,50 | 8.500 | 9.500 | Range |
| Mo | 1,85-2,15 | 1.850 | 2.150 | Range |
The published column is the source string byte-for-byte, decimal comma and all; Min and Max are the parsed bounds. Elements not listed have no value on file — they are omitted, never inferred.
Predicted transformation temperatures
This grade's composition falls outside the published model's validated range (a low-alloy composition window), so no transformation temperature is predicted here.
Physical & mechanical properties
An absent property means we hold no value for it — it is left out rather than estimated, interpolated from a neighbouring grade, or filled from a handbook. It does not mean the property is undefined for the material.
Properties by condition
1 conditions · 1 valuessteelnumber| Delivery state | HB |
|---|---|
| Solution annealed | 363 |
Every figure holds only for the condition on its own row. Values are never merged across conditions or across sources, never averaged, and never interpolated between two rows. An em dash means no value on file — never zero. Figures are converted to the unit in the column header; the source’s own wording is kept and shown where the two differ.
Similar grades — and why
Selection rule, stated so you can disagree with it: same number class 1.4, a shared category, and a published range for Cr / Ni that overlaps this grade’s. These are neighbours in composition space — they are not equivalents, and none is claimed to be interchangeable with this grade.
Looking for this grade under another name?
Search the catalogue by designation, material number or composition — every name on this page is itself a way in.