UNS · United States · 42 designations

S43036

S43036 is a designation in UNS for the material held under material number 1.4510, also listed as X3CrTi17. It is a material in the category Stainless steels. We list 42 designations recorded for this grade, in the standards DIN / EN, UNS, AISI / SAE, ASTM, AFNOR, UNE, ISO, JIS, GB, GOST, UNI, ČSN, PN, SRPS and STAS.

Material no. 1.4510
Category Stainless steels · 468 grades
Designations 42

Search Inquiry Datasheet as PDFPrint-ready A4 documentGenerating …Download startedTry again

If you came for one of these

The most-used names for this grade.

About Stainless steels

Stainless steels are corrosion-resistant alloy steels whose chromium content promotes a protective passive surface film. They are used for equipment, structures and components exposed to moisture, chemicals or hygienic service, with different alloy compositions selected for corrosion resistance, strength, formability or weldability.

This describes the material class as a whole. Always confirm the individual grade against the standard before ordering.

Also known as

42 designations · 15 standards · nothing hidden

This grade’s own namerecorded in our sources as this grade’s own designation under that standard.

Indicativetaken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.

Withdrawndesignation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.

DIN / ENEurope · 2

UNSUnited States · 3

S43035This grade’s own name
S43036This grade’s own name
S43900Indicative

AISI / SAEUnited States · 8

ASTMUnited States · 5

AFNORFrance · 3

UNESpain · 3

ISOInternational · 1

FP18BIndicative

JISJapan · 3

GBChina · 2

GOSTRussia / CIS · 5

UNIItaly · 3

ČSNCzechia · 1

17041Indicative

PNPoland · 1

0H17TIndicative

SRPSSerbia · 1

Č.4970.1Indicative

STASRomania · 1

8TiCr170Indicative

Every designation on file is listed — no truncation, no “+ n more”. Each one is itself a route that leads back here.

Chemical composition

7 elements on file · weight %

What this alloy is

Iron — the balance, never listed by a standard — 80.9 %Cr — 17 %Si — 1 %Mn — 1 %Traces & impurities · 0.1 %

Logarithmic scale, 0.01 % to 100 % — every value here compares directly, decade by decade.

Element	% by weight
	≤ 0.05
	≤ 1
	≤ 1
	0.04
	0.015
	16–18
	4x(C+N)+0,15≤0,80

0.01 %0.1 %1 %10 %100 %

The scale is logarithmic, not the element’s raw share of the alloy — the only honest way to fit 0.01 % and 100 % in one picture, and it means every value here can be compared with every other.

Element	As publishedsource text, verbatim	Min% by weight	Max% by weight	Bound
C	≤0,05	—	0.050	Max
Si	≤1,00	—	1.000	Max
P	0,04	0.040	0.040	Exact
S	0,015	0.015	0.015	Exact
Ti	4x(C+N)+0,15≤0,80	—	0.800	No numeric bound
Cr	16,0-18,0	16.000	18.000	Range
Mn	≤1,00	—	1.000	Max

The published column is the source string byte-for-byte, decimal comma and all; Min and Max are the parsed bounds. Elements not listed have no value on file — they are omitted, never inferred.

Predicted transformation temperatures

Not enough recorded composition to predict a transformation temperature for this grade — missing: Ni, Mo.

Physical & mechanical properties

Density7,7g/cm³Exact

Weldabilityweldable with restrictionsAs published: limited weldability.

Temper brittlenesssusceptibleAs published: predisposed

An absent property means we hold no value for it — it is left out rather than estimated, interpolated from a neighbouring grade, or filled from a handbook. It does not mean the property is undefined for the material.

Properties by condition

4 conditions · 18 values

By delivery stateno delivery state statedsource splav

Delivery state	RmN/mm²	A5%
Pipe cooling strain, GOST 9941-81	372	17
Pipe hot strain, GOST 9940-81	372	17

By heat-treated conditionno delivery state statedsource splav

Heat-treated condition	RmN/mm²	A5%
Sheet trick, GOST 7350-77	440	18

By heat-treated conditionno delivery state statedsource splav

Heat-treated condition	RmN/mm²	A5%
Sheet thin, GOST 5582-75	460	20

At temperatureno delivery state statedsource splav

Temperature°C	Densityg/cm³	Elastic modulusGPa	Thermal expansion coefficient10^-6/K	Thermal conductivityW/(m·K)	Specific heat capacityJ/(kg·K)	Electrical resistivitynΩ·m
20	7.7	206	—	25	—	600
100	—	—	10	—	462	—
200	—	—	10	—	—	—
300	—	—	10.5	—	—	—
400	—	—	10.5	—	—	—
500	—	—	11	—	—	—

Every figure holds only for the condition on its own row. Values are never merged across conditions or across sources, never averaged, and never interpolated between two rows. An em dash means no value on file — never zero. Figures are converted to the unit in the column header; the source’s own wording is kept and shown where the two differ.

Similar grades — and why

Selection rule, stated so you can disagree with it: same number class 1.4, a shared category, and a published range for Cr / Si that overlaps this grade’s. These are neighbours in composition space — they are not equivalents, and none is claimed to be interchangeable with this grade.

1.40161.4016

Cr 16,0-18,0 · Si ≤1,00