AFNOR steel grades — 1469 designations
Every grade designated under AFNOR, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Every name on this page is an indicative cross-reference, not an asserted identity: the grades are close, not interchangeable. Check the composition before you substitute.
Also known as
1469 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| 0.5Ni355 | 1.6217 | Low-temperature structural steels | ≤ 0.16 | 2 |
| 06-05-05-04-02 | 1.3243 | High-speed steels | 0.87–0.95 | 19 |
| 1 C | 1.0332 | Unalloyed structural steels | ≤ 0.12 | 16 |
| 1.5Ni355 | 1.6228 | Low-temperature structural steels | ≤ 0.18 | 1 |
| 100C6 | 1.3505 | Bearing steels | 0.93–1.05 | 22 |
| 100CD7 | 1.3537 | Others | 0.93–1.05 | 4 |
| 100CD7 | 1.3538 | Others | 0.93–1.05 | 2 |
| 100CD7 | 1.2303 | Tool steels for cold work | 0.9–1.1 | 4 |
| 100CM6 | 1.3520 | Bearing steels | 0.93–1.05 | 16 |
| 100Cr6 | 1.2067 | Tool steels for cold work | 0.95–1.1 | 21 |
| 100Cr6 | 1.3505 | Bearing steels | 0.93–1.05 | 22 |
| 100Cr6RR | 1.2067 | Tool steels for cold work | 0.95–1.1 | 21 |
| 100Cr6RR | 1.3505 | Bearing steels | 0.93–1.05 | 22 |
| 100CrMn6 | 1.3520 | Bearing steels | 0.93–1.05 | 16 |
| 100CrMo7-2 | 1.3537 | Others | 0.93–1.05 | 4 |
| 100CrMo7-2 | 1.3538 | Others | 0.93–1.05 | 2 |
| 100CrMo7-2 | 1.2303 | Tool steels for cold work | 0.9–1.1 | 4 |
| 100CrMo8-3 | 1.3537 | Others | 0.93–1.05 | 4 |
| 100CrMo8-3 | 1.3538 | Others | 0.93–1.05 | 2 |
| 100CrMo8-3 | 1.2303 | Tool steels for cold work | 0.9–1.1 | 4 |
| 100MCW5 | 1.2510 | Tool steels for cold work | 0.9–1.05 | 13 |
| 105WC13 | 1.2419 | Tool steels for cold work | 1–1.1 | 16 |
| 105WCr5 | 1.2419 | Tool steels for cold work | 1–1.1 | 16 |
| 106WCr6 | 1.2419 | Tool steels for cold work | 1–1.1 | 16 |
| 10CD9-10 | 1.7380 | Heat-resistant structural steels | 0.08–0.14 | 20 |
| 10CD9-10 | 1.7383 | Heat-resistant structural steels | 0.08–0.15 | 9 |
| 10CD9-10 | 1.7375 | Heat-resistant structural steels | 0.1–0.15 | 6 |
| 10F1 | 1.0721 | Free cutting steels | 0.07–0.13 | 15 |
| 10NC11 | 1.5732 | Case hardening steels | 0.1–0.17 | 13 |
| 10NC6 | 1.5805 | Case hardening steels | 0.07–0.12 | 1 |
| 10NC6 | 1.5713 | Others | 0.1–0.17 | 3 |
| 10PbF2 | 1.0722 | Free cutting steels | 0.07–0.13 | 5 |
| 10PbF2 | 1.0721 | Free cutting steels | 0.07–0.13 | 15 |
| 115CrV3 | 1.2210 | Tool steels for cold work | 1.1–1.25 | 13 |
| 11CrMo9-10 | 1.7380 | Heat-resistant structural steels | 0.08–0.14 | 20 |
| 12C3 | 1.7015 | Case hardening steels | 0.12–0.18 | 15 |
| 12C3 | 1.7016 | Case hardening steels | 0.14–0.2 | 11 |
| 12C8 | 1.7015 | Case hardening steels | 0.12–0.18 | 15 |
| 12CD10 | 1.7380 | Heat-resistant structural steels | 0.08–0.14 | 20 |
| 12CD4 | 1.7262 | Case hardening steels | 0.13–0.17 | 18 |
| 12CD4 | 1.7335 | Heat-resistant structural steels | 0.08–0.18 | 22 |
| 12CD4 | 1.7337 | Heat-resistant structural steels | 0.13–0.2 | 9 |
| 12CD9 | 1.7380 | Heat-resistant structural steels | 0.08–0.14 | 20 |
| 12CD9-10 | 1.7380 | Heat-resistant structural steels | 0.08–0.14 | 20 |
| 12CD9-10 | 1.7383 | Heat-resistant structural steels | 0.08–0.15 | 9 |
| 12CD9-10 | 1.7375 | Heat-resistant structural steels | 0.1–0.15 | 6 |
| 12N14 | 1.5637 | Low-temperature structural steels | ≤ 0.15 | 11 |
| 12NC15 | 1.5752 | Case hardening steels | 0.14–0.2 | 15 |
| 12NC15 | 1.5752 | Case hardening steels | 0.14–0.2 | 15 |
| 12NJ14 | 1.5637 | Low-temperature structural steels | ≤ 0.15 | 11 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.