AFNOR steel grades — 1469 designations — Page 22
Every grade designated under AFNOR, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Every name on this page is an indicative cross-reference, not an asserted identity: the grades are close, not interchangeable. Check the composition before you substitute.
Also known as
1469 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| Z10N05 | 1.5639 | Low-temperature structural steels | 0.12–0.19 | 9 |
| Z10N05 | 1.5680 | Low-temperature structural steels | ≤ 0.15 | 4 |
| Z10NC32-21 | 1.4876 | Heat resistant steels | ≤ 0.12 | 12 |
| Z10NC32-21 | 1.4959 | High-temperature steels | 0.05–0.1 | 6 |
| Z10NC32-21 | 1.4958 | High-temperature steels | 0.03–0.08 | 6 |
| Z10NC32-21 | 1.4558 | Stainless steels | ≤ 0.03 | 4 |
| Z110DKCWV09-08-04-02-01 | 1.3247 | High-speed steels | 1.05–1.15 | 14 |
| Z110WKCDV07-05-04-04-02 | 1.3246 | High-speed steels | 1.05–1.15 | 5 |
| Z11CF13 | 1.4005 | Stainless steels | 0.08–0.15 | 14 |
| Z11CN17-08 | 1.4310 | Stainless steels | 0.05–0.15 | 18 |
| Z11CN18-08 | 1.4310 | Stainless steels | 0.05–0.15 | 18 |
| Z12 C 13 M | 1.4011 | Others | ≤ 0.15 | 7 |
| Z120M12 | 1.3402 | Others | 1–1.25 | 4 |
| Z120M12 | 1.3406 | Others | 0.9–1.05 | 4 |
| Z120M12 | 1.3802 | Non-magnetic steels | 1.1–1.3 | 6 |
| Z120M12 | 1.3802 | Non-magnetic steels | 1.05–1.35 | 7 |
| Z120M12 | 1.3401 | Quenched and tempered steels | 1.1–1.3 | 19 |
| Z120M12M | 1.3401 | Quenched and tempered steels | 1.1–1.3 | 19 |
| Z120Mn12 | 1.3401 | Quenched and tempered steels | 1.1–1.3 | 19 |
| Z12C13 | — | — | — | 3 |
| Z12C13 | 1.4006 | Stainless steels | 0.08–0.15 | 26 |
| Z12C13-M | 1.4006 | Stainless steels | 0.08–0.15 | 26 |
| Z12CAS18 | 1.4742 | Heat resistant steels | ≤ 0.12 | 17 |
| Z12CAS25 | 1.4762 | Heat resistant steels | ≤ 0.12 | 12 |
| Z12CF13 | 1.4005 | Stainless steels | 0.08–0.15 | 14 |
| Z12CMN17-07Az | 1.4372 | Others | ≤ 0.15 | 10 |
| Z12CMN17-07Az | 1.4373 | Non-magnetic steels | ≤ 0.15 | 13 |
| Z12CN17-07 | 1.4300 | Stainless steels | ≤ 0.12 | 15 |
| Z12CN17.07 | 1.4310 | Stainless steels | 0.05–0.15 | 18 |
| Z12CN18-09 | 1.4310 | Stainless steels | 0.05–0.15 | 18 |
| Z12CN18-09 | 1.4319 | Stainless steels | ≤ 0.07 | 11 |
| Z12CN18.08 | 1.4310 | Stainless steels | 0.05–0.15 | 18 |
| Z12CN25-20 | 1.4842 | Others | ≤ 0.14 | 14 |
| Z12CN25-20 | 1.4843 | Resistance heating alloys | ≤ 0.2 | 9 |
| Z12CN25.20 | 1.4841 | Heat resistant steels | ≤ 0.2 | 17 |
| Z12CN2520 | 1.4845 | Heat resistant steels | ≤ 0.1 | 21 |
| Z12CN26-21 | 1.4845 | Heat resistant steels | ≤ 0.1 | 21 |
| Z12CN26-21 | 1.4842 | Others | ≤ 0.14 | 14 |
| Z12CNDV12-02 | 1.4938 | High-temperature steels | 0.08–0.15 | 2 |
| Z12CNDV12-03 | 1.4938 | High-temperature steels | 0.08–0.15 | 2 |
| Z12CNS25.20 | 1.4841 | Heat resistant steels | ≤ 0.2 | 17 |
| Z12Cr13 | 1.4006 | Stainless steels | 0.08–0.15 | 26 |
| Z12CrS13 | 1.4005 | Stainless steels | 0.08–0.15 | 14 |
| Z12NCS35.16 | 1.4864 | Heat resistant steels | ≤ 0.15 | 14 |
| Z12NCS37-18 | 1.4864 | Heat resistant steels | ≤ 0.15 | 14 |
| Z130WDCV06-05-04-04 | 1.3344 | High-speed steels | 1.15–1.25 | 8 |
| Z130WKCDV | 1.3207 | High-speed steels | 1.2–1.35 | 14 |
| Z13C13 | 1.4724 | Heat resistant steels | ≤ 0.12 | 15 |
| Z13C13 | 1.4006 | Stainless steels | 0.08–0.15 | 26 |
| Z13CF17 | 1.4104 | Stainless steels | 0.1–0.17 | 13 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.