AS / NZS steel grades — 118 designations — Page 2
Every grade designated under AS / NZS, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Every name on this page is an indicative cross-reference, not an asserted identity: the grades are close, not interchangeable. Check the composition before you substitute.
Also known as
118 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| 5120 | 1.7131 | Case hardening steels | 0.14–0.19 | 24 |
| 5120H | 1.7131 | Case hardening steels | 0.14–0.19 | 24 |
| 5132 | 1.7033 | Quenched and tempered steels | 0.3–0.37 | 18 |
| 5132H | 1.7034 | Quenched and tempered steels | 0.34–0.41 | 23 |
| 5140 | 1.7034 | Quenched and tempered steels | 0.34–0.41 | 23 |
| 5155 | 1.7176 | Spring steels | 0.52–0.59 | 18 |
| 5210 | 1.3505 | Bearing steels | 0.93–1.05 | 22 |
| 600-3 | EN-JS1060 | Others | — | 20 |
| 600-3 | EN-JS1092 | Others | — | 20 |
| 600-3 | EN-JS1093 | Others | — | 20 |
| 6150 | 1.8159 | Quenched and tempered steels | 0.47–0.55 | 27 |
| 6150H | 1.8159 | Quenched and tempered steels | 0.47–0.55 | 27 |
| 7-430R | 1.0436 | Fine-grain structural steels | 0.15–0.2 | 14 |
| 700-2 | EN-JS1102 | Others | — | 21 |
| 700-2 | EN-JS1103 | Others | — | 21 |
| 800-2 | EN-JS1080 | Others | — | 16 |
| 8617 | 1.6523 | Case hardening steels | 0.17–0.23 | 18 |
| 8617H | 1.6523 | Case hardening steels | 0.17–0.23 | 18 |
| 8620 | 1.6523 | Case hardening steels | 0.17–0.23 | 18 |
| 8620H | 1.6523 | Case hardening steels | 0.17–0.23 | 18 |
| 9255 | 1.5026 | Spring steels | 0.52–0.6 | 20 |
| 9260 | 1.0961 | High-strength multi-phase steels | ≤ 0.18 | 14 |
| 9260H | 1.0961 | High-strength multi-phase steels | ≤ 0.18 | 14 |
| A1010 | 1.1121 | Case hardening steels | 0.07–0.13 | 22 |
| CA1 | 1.0322 | Unalloyed structural steels | ≤ 0.12 | 17 |
| CA1 | 1.0332 | Unalloyed structural steels | ≤ 0.12 | 16 |
| CA1010 | 1.1121 | Case hardening steels | 0.07–0.13 | 22 |
| CA2 | 1.0338 | Unalloyed structural steels | ≤ 0.08 | 18 |
| CA2 | 1.0322 | Unalloyed structural steels | ≤ 0.12 | 17 |
| CA3 | 1.0338 | Unalloyed structural steels | ≤ 0.08 | 18 |
| CA3 | 1.0322 | Unalloyed structural steels | ≤ 0.12 | 17 |
| CA4 | 1.0314 | Unalloyed structural steels | ≤ 0.03 | 14 |
| CA4 | 1.0338 | Unalloyed structural steels | ≤ 0.08 | 18 |
| CA4 | 1.0322 | Unalloyed structural steels | ≤ 0.12 | 17 |
| HA1 | 1.0322 | Unalloyed structural steels | ≤ 0.12 | 17 |
| HA1 | 1.0332 | Unalloyed structural steels | ≤ 0.12 | 16 |
| HA1010 | 1.1121 | Case hardening steels | 0.07–0.13 | 22 |
| HA3 | 1.0338 | Unalloyed structural steels | ≤ 0.08 | 18 |
| HA3 | 1.0322 | Unalloyed structural steels | ≤ 0.12 | 17 |
| HA4N | 1.0338 | Unalloyed structural steels | ≤ 0.08 | 18 |
| HA4N | 1.0322 | Unalloyed structural steels | ≤ 0.12 | 17 |
| HK1042 | 1.0503 | Quenched and tempered steels | 0.42–0.5 | 24 |
| K1015 | 1.0401 | Case hardening steels | 0.12–0.18 | 23 |
| K1015 | 1.1141 | Case hardening steels | 0.12–0.18 | 20 |
| K1018 | 1.0401 | Case hardening steels | 0.12–0.18 | 23 |
| K1018 | 1.1141 | Case hardening steels | 0.12–0.18 | 20 |
| K1018 | 1.0402 | Quenched and tempered steels | 0.17–0.24 | 24 |
| K1018 | 1.9413 | Others | 0.15–0.2 | 3 |
| K1020 | 1.0401 | Case hardening steels | 0.12–0.18 | 23 |
| K1020 | 1.1141 | Case hardening steels | 0.12–0.18 | 20 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.