BS steel grades — 1547 designations — Page 25
Every grade designated under BS, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an indicative cross-reference, not an asserted identity — the grades are close, not interchangeable. 2 of 50 rows differ and carry a “This grade’s own name” mark.
Also known as
1547 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| EN40B | 1.8515 | Nitriding steels | 0.28–0.35 | 8 |
| EN40B | 1.7361 | Quenched and tempered steels | 0.28–0.35 | 7 |
| EN41B | 1.8507 | Nitriding steels | 0.3–0.37 | 8 |
| EN43D | 1.0601 | Quenched and tempered steels | 0.57–0.65 | 25 |
| EN43D | 1.1221 | Quenched and tempered steels | 0.57–0.65 | 18 |
| EN45 This grade’s own name | 1.5026 | Spring steels | 0.52–0.6 | 20 |
| En46 | 1.5122 | Quenched and tempered steels | 0.33–0.41 | 6 |
| En46 | 1.5121 | Quenched and tempered steels | 0.42–0.5 | 3 |
| EN48A This grade’s own name | 1.7102 | Spring steels | 0.51–0.59 | 14 |
| En5 | 1.0528 | Quenched and tempered steels | 0.27–0.34 | 14 |
| EN56B | 1.4027 | Cast stainless steels | 0.16–0.23 | 14 |
| En56C | 1.4021 | Stainless steels | 0.16–0.25 | 18 |
| En56D | 1.4028 | Stainless steels | 0.26–0.35 | 18 |
| EN56D | 1.4034 | Stainless steels | 0.43–0.5 | 18 |
| En57 | 1.4057 | Stainless steels | 0.12–0.22 | 17 |
| EN58B | 1.4541 | Stainless steels | ≤ 0.08 | 25 |
| EN58C | 1.4878 | Heat resistant steels | ≤ 0.1 | 14 |
| EN58F | 1.4550 | Stainless steels | ≤ 0.08 | 15 |
| EN58J | 1.4401 | Stainless steels | ≤ 0.07 | 20 |
| EN58J | 1.4571 | Stainless steels | ≤ 0.08 | 18 |
| EN58M | 1.4305 | Stainless steels | ≤ 0.1 | 17 |
| EN60 | 1.4742 | Heat resistant steels | ≤ 0.12 | 17 |
| En8 | 1.0511 | Quenched and tempered steels | 0.37–0.44 | 21 |
| EN8M | 1.0726 | Free cutting steels | 0.32–0.39 | 15 |
| En9 | 1.0535 | Quenched and tempered steels | 0.52–0.6 | 21 |
| ENEN56A | 1.4006 | Stainless steels | 0.08–0.15 | 26 |
| ERW1 | 1.0033 | Unalloyed structural steels | ≤ 0.11 | 3 |
| ERW1KM | 1.0215 | Unalloyed structural steels | ≤ 0.14 | 2 |
| ERW1KM | 1.0220 | Unalloyed structural steels | ≤ 0.16 | 2 |
| ERW2 | 1.0034 | Unalloyed structural steels | ≤ 0.15 | 12 |
| ERW2 | 1.0308 | Unalloyed structural steels | ≤ 0.17 | 10 |
| ERW3 | 1.0308 | Unalloyed structural steels | ≤ 0.17 | 10 |
| ERW3 | 1.0225 | Unalloyed structural steels | ≤ 0.21 | 2 |
| ERW3KM | 1.0237 | Unalloyed structural steels | ≤ 0.2 | 2 |
| ERW4 | 1.0308 | Unalloyed structural steels | ≤ 0.17 | 10 |
| ERW4 | 1.0044 | Unalloyed structural steels | ≤ 0.21 | 26 |
| ERW4 | 1.0225 | Unalloyed structural steels | ≤ 0.21 | 2 |
| ERW5 | 1.0570 | Unalloyed structural steels | ≤ 0.2 | 22 |
| ERW5 | 1.0570 | Unalloyed structural steels | ≤ 0.2 | 20 |
| ERW5(KM) | 1.0575 | Others | ≤ 0.16 | 2 |
| ERW5NKM | 1.0580 | Unalloyed structural steels | ≤ 0.22 | 10 |
| ERW5NZF | 1.0580 | Unalloyed structural steels | ≤ 0.22 | 10 |
| Fe310-0 | 1.0035 | Unalloyed structural steels | — | 22 |
| Fe360B | 1.0028 | Unalloyed structural steels | ≤ 0.15 | 18 |
| Fe360B | 1.0036 | Unalloyed structural steels | ≤ 0.17 | 20 |
| Fe360B | 1.0036 | Unalloyed structural steels | ≤ 0.17 | 19 |
| Fe360BFU | 1.0038 | Unalloyed structural steels | ≤ 0.17 | 26 |
| Fe360D1FF | 1.0038 | Unalloyed structural steels | ≤ 0.17 | 26 |
| Fe360D1FF | 1.0036 | Unalloyed structural steels | ≤ 0.17 | 20 |
| Fe360D1FF | 1.0036 | Unalloyed structural steels | ≤ 0.17 | 19 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.