10CrMo9-10
10CrMo9-10 is a material in the category Heat-resistant structural steels, held under material number 1.7380. We list 82 designations recorded for this grade, in the standards DIN / EN, UNS, AISI / SAE, ASTM, BS, AFNOR, UNE, ISO, JIS, GB, GOST, UNI, SS, ČSN, PN, SRPS, STN, MSZ, STAS, BDS and ÖNORM. Its recorded composition includes C 0.08–0.14%, Si ≤ 0.5%, Cr 2–2.5%, Mn 0.4–0.8% and Mo 0.9–1.1%. Recorded mechanical properties include Rm 390–630 N/mm², Re 295 N/mm², A5 20% and KCU 980 kJ/m²; these figures vary with the delivery condition and dimension. Its recorded density is 7.85 g/cm³.
If you came for one of these
The most-used names for this grade.About Heat-resistant structural steels
Heat-resistant structural steels are structural steels designed to retain useful strength and dimensional stability at elevated temperatures. They are used for load-bearing components in hot-service equipment where mechanical performance must be maintained during heating.
This describes the material class as a whole. Always confirm the individual grade against the standard before ordering.
Also known as
82 designations · 21 standards · nothing hidden- 1.7380Indicative
- 10CrMo9-10This grade’s own name
- Gr.P22Indicative
- 10Ch2MIndicative
- 10G2AIndicative
- 10G2FBIndicative
- 10G2FBYuIndicative
- 10G2SBIndicative
- 10G2SFBIndicative
- 10GN2MFAIndicative
- 10GN2MFA-ShIndicative
- 10Kh2GNMIndicative
- 10KH2MIndicative
- 10ГН2МФА-ВДIndicative
- 10Х2МIndicative
- 10Х2М-ВДIndicative
- 12X2MIndicative
- 1Ch2MIndicative
- 1Kh2MIndicative
- PK10D2FIndicative
- PK10N2MIndicative
- Sv-10G2Indicative
- Sv-10G2SMAIndicative
- Sv-10KhG2SMAIndicative
- Sv-10KhN2GMTIndicative
- ПК10Д2Ф-6.0Indicative
- ПК10Н2М-6.8Indicative
- ПК10Н2М-7.2Indicative
- ПК10Н2М-7.6Indicative
- ст.12X2MIndicative
- ЭИ-984Indicative
- 10CrMo9-10Indicative
- 12CrMo10Indicative
- 12CrMo9Indicative
- 12CrMo9-10Indicative
Every designation on file is listed — no truncation, no “+ n more”. Each one is itself a route that leads back here.
Chemical composition
9 elements on file · weight %What this alloy is
Logarithmic scale, 0.01 % to 100 % — every value here compares directly, decade by decade.
| Element | % by weight |
|---|---|
0.08–0.14 | |
≤ 0.5 | |
0.4–0.8 | |
0.02 | |
0.01 | |
2–2.5 — | |
0.9–1.1 | |
≤ 0.3 | |
0.012 |
The scale is logarithmic, not the element’s raw share of the alloy — the only honest way to fit 0.01 % and 100 % in one picture, and it means every value here can be compared with every other.
| Element | As publishedsource text, verbatim | Min% by weight | Max% by weight | Bound |
|---|---|---|---|---|
| C | 0,08-0,14 | 0.080 | 0.140 | Range |
| N | 0,012 | 0.012 | 0.012 | Exact |
| Si | ≤0,50 | — | 0.500 | Max |
| P | 0,02 | 0.020 | 0.020 | Exact |
| S | 0,01 | 0.010 | 0.010 | Exact |
| Cr | 2,00-2,50 | 2.000 | 2.500 | Range |
| Mn | 0,40-0,80 | 0.400 | 0.800 | Range |
| Cu | ≤0,30 | — | 0.300 | Max |
| Mo | 0,90-1,10 | 0.900 | 1.100 | Range |
The published column is the source string byte-for-byte, decimal comma and all; Min and Max are the parsed bounds. Elements not listed have no value on file — they are omitted, never inferred.
Predicted transformation temperatures
Not enough recorded composition to predict a transformation temperature for this grade — missing: Ni.
Physical & mechanical properties
An absent property means we hold no value for it — it is left out rather than estimated, interpolated from a neighbouring grade, or filled from a handbook. It does not mean the property is undefined for the material.
Properties by condition
2 conditions · 14 valuessteelnumber| Thicknessmm | ReHN/mm² | RmN/mm² |
|---|---|---|
| ≤ 16 | 310 | — |
| 16 – 40 | 300 | — |
| 40 – 60 | 290 | — |
| ≤ 60 | — | 480 – 630 |
| 60 – 100 | 280 | 470 – 620 |
| 100 – 150 | 260 | 460 – 610 |
| 150 – 250 | 250 | 450 – 600 |
splav| Delivery state | RmN/mm² | ReN/mm² | A5% | KCUkJ/m² |
|---|---|---|---|---|
| Sheet, GOST 5520-79 | 390 – 590 | 295 | 20 | 980 |
Every figure holds only for the condition on its own row. Values are never merged across conditions or across sources, never averaged, and never interpolated between two rows. An em dash means no value on file — never zero. Figures are converted to the unit in the column header; the source’s own wording is kept and shown where the two differ.
Heat treatment
ASTM A335/
- Isothermal annealingTemperature not stated
- NormalizingTemperature not stated
- Tempering675 °C
Source: www.caishuku.com
Similar grades — and why
Selection rule, stated so you can disagree with it: same number class 1.7, a shared category, and a published range for Cr / Mo that overlaps this grade’s. These are neighbours in composition space — they are not equivalents, and none is claimed to be interchangeable with this grade.
Looking for this grade under another name?
Search the catalogue by designation, material number or composition — every name on this page is itself a way in.