DIN / EN steel grades — 4704 designations
Every grade designated under DIN / EN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an indicative cross-reference, not an asserted identity — the grades are close, not interchangeable. 1 of 50 rows differ and carry a “This grade’s own name” mark.
Also known as
4704 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| 0.6660 | 0.6660 | Others | ≤ 3 | 5 |
| 1.0038 | 1.0038 | Unalloyed structural steels | ≤ 0.17 | 26 |
| 1.0060 | 1.0580 | Unalloyed structural steels | ≤ 0.22 | 10 |
| 1.0070 | 1.0070 | Unalloyed structural steels | — | 16 |
| 1.0070 | 1.0070 | Unalloyed structural steels | — | 16 |
| 1.0144 | 1.0144 | Unalloyed structural steels | ≤ 0.18 | 22 |
| 1.0254 | 1.0254 | Unalloyed structural steels | ≤ 0.16 | 6 |
| 1.0305 | 1.0305 | Unalloyed structural steels | ≤ 0.17 | 3 |
| 1.0336 | 1.0347 | Unalloyed structural steels | ≤ 0.1 | 12 |
| 1.0338 | 1.0338 | Unalloyed structural steels | ≤ 0.08 | 18 |
| 1.0345 | 1.0345 | Heat-resistant structural steels | ≤ 0.16 | 18 |
| 1.0356 | 1.0356 | Others | — | 2 |
| 1.0401 | 1.0401 | Case hardening steels | 0.12–0.18 | 23 |
| 1.0402 | 1.0402 | Quenched and tempered steels | 0.17–0.24 | 24 |
| 1.0405 | 1.0405 | Unalloyed structural steels | ≤ 0.21 | 3 |
| 1.0425 | 1.0425 | Heat-resistant structural steels | ≤ 0.2 | 20 |
| 1.0432 | 1.0432 | Others | 0.18–0.23 | 3 |
| 1.0436 | 1.0481 | Heat-resistant structural steels | 0.08–0.2 | 17 |
| 1.0437 | 1.0437 | Others | ≤ 0.2 | 8 |
| 1.0484 | 1.0484 | Others | ≤ 0.17 | 2 |
| 1.0486 | 1.0486 | Fine-grain structural steels | ≤ 0.16 | 6 |
| 1.0486 | 1.0490 | Fine-grain structural steels | ≤ 0.18 | 6 |
| 1.0501 | 1.0501 | Quenched and tempered steels | 0.32–0.39 | 23 |
| 1.0503 | 1.0503 | Quenched and tempered steels | 0.42–0.5 | 24 |
| 1.0511 | 1.0511 | Quenched and tempered steels | 0.37–0.44 | 21 |
| 1.0528 | 1.0528 | Quenched and tempered steels | 0.27–0.34 | 14 |
| 1.0535 | 1.0535 | Quenched and tempered steels | 0.52–0.6 | 21 |
| 1.0562 | 1.0562 | Fine-grain structural steels | ≤ 0.18 | 18 |
| 1.0566 | 1.0566 | Fine-grain structural steels | ≤ 0.18 | 11 |
| 1.0570 | 1.0570 | Unalloyed structural steels | ≤ 0.2 | 22 |
| 1.0570 | 1.0570 | Unalloyed structural steels | ≤ 0.2 | 20 |
| 1.0577 | 1.0577 | Unalloyed structural steels | ≤ 0.2 | 11 |
| 1.0582 | 1.0582 | Others | ≤ 0.2 | 3 |
| 1.0601 | 1.0601 | Quenched and tempered steels | 0.57–0.65 | 25 |
| 1.0715 | 1.0715 | Free cutting steels | ≤ 0.14 | 14 |
| 1.0718 | 1.0718 | Free cutting steels | ≤ 0.14 | 11 |
| 1.0721 | 1.0721 | Free cutting steels | 0.07–0.13 | 15 |
| 1.0722 | 1.0722 | Free cutting steels | 0.07–0.13 | 5 |
| 1.0726 | 1.0726 | Free cutting steels | 0.32–0.39 | 15 |
| 1.0736 | 1.0736 | Free cutting steels | ≤ 0.14 | 11 |
| 1.0737 | 1.0737 | Free cutting steels | ≤ 0.14 | 8 |
| 1.0841 | 1.0841 | Unalloyed structural steels | — | 6 |
| 1.0961 This grade’s own name | 1.0598 | Others | ≤ 0.18 | — |
| 1.0961 | 1.0961 | High-strength multi-phase steels | ≤ 0.18 | 14 |
| 1.0966 | 1.8974 | Fine-grain steels for cold forming | ≤ 0.12 | 3 |
| 1.0988 | 1.8969 | Fine-grain steels for cold forming | ≤ 0.12 | 2 |
| 1.0989 | 1.8976 | Fine-grain steels for cold forming | ≤ 0.12 | — |
| 1.1141 | 1.1141 | Case hardening steels | 0.12–0.18 | 20 |
| 1.1157 | 1.1157 | Quenched and tempered steels | 0.36–0.44 | 9 |
| 1.1158 | 1.1158 | Quenched and tempered steels | 0.22–0.29 | 12 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.