DIN / EN steel grades — 4704 designations — Page 2
Every grade designated under DIN / EN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an indicative cross-reference, not an asserted identity — the grades are close, not interchangeable. 3 of 50 rows differ and carry a “This grade’s own name” mark.
Also known as
4704 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| 1.1167 | 1.1167 | Quenched and tempered steels | 0.32–0.4 | 17 |
| 1.1170 | 1.1170 | Quenched and tempered steels | 0.25–0.32 | 16 |
| 1.1183 | 1.1183 | Steels for surface hardening | 0.33–0.39 | 7 |
| 1.1191 | 1.1191 | Quenched and tempered steels | 0.42–0.5 | 21 |
| 1.1191 | 1.1191 | Others | 0.42–0.5 | 18 |
| 1.1203 | 1.1204 | Others | 0.52–0.6 | 5 |
| 1.1203 | 1.1203 | Quenched and tempered steels | 0.52–0.6 | 15 |
| 1.1213 | 1.1213 | Steels for surface hardening | 0.5–0.57 | 11 |
| 1.1221 | 1.1221 | Quenched and tempered steels | 0.57–0.65 | 18 |
| 1.1274 | 1.1274 | Spring steels | 0.95–1.05 | 13 |
| 1.1545 | 1.1545 | Unalloyed tool steels / carbon steels | 1–1.1 | 19 |
| 1.1620 | 1.1520 | Unalloyed tool steels / carbon steels | 0.65–0.75 | 11 |
| 1.2067 | 1.2067 | Tool steels for cold work | 0.95–1.1 | 21 |
| 1.2080 | 1.2080 | Tool steels for cold work | 1.9–2.2 | 18 |
| 1.2312 | 1.2738 | Tool steels for cold work | 0.35–0.45 | — |
| 1.2344 | 1.2344 | Tool steels for hot work | 0.35–0.42 | 20 |
| 1.2363 | 1.2363 | Tool steels for cold work | 0.95–1.05 | 16 |
| 1.2419 | 1.2419 | Tool steels for cold work | 1–1.1 | 16 |
| 1.2436 | 1.2436 | Tool steels for cold work | 2–2.3 | 16 |
| 1.2542 | 1.2542 | Tool steels for cold work | 0.4–0.5 | 12 |
| 1.2581 | 1.2581 | Tool steels for hot work | 0.25–0.35 | 18 |
| 1.2601 | 1.2601 | Tool steels for cold work | 1.55–1.75 | 15 |
| 1.2713 | 1.2713 | Tool steels for cold work | 0.5–0.6 | 12 |
| 1.2833 | 1.2833 | Tool steels for cold work | 0.95–1.05 | 7 |
| 1.3243 | 1.3243 | High-speed steels | 0.87–0.95 | 19 |
| 1.3255 | 1.3255 | High-speed steels | 0.75–0.83 | 14 |
| 1.3343 | 1.3343 | High-speed steels | 0.86–0.94 | 19 |
| 1.3348 | 1.3348 | High-speed steels | 0.95–1.05 | 8 |
| 1.3355 | 1.3355 | High-speed steels | 0.73–0.83 | 22 |
| 1.3401 | 1.3401 | Quenched and tempered steels | 1.1–1.3 | 19 |
| 1.3505 | 1.3505 | Bearing steels | 0.93–1.05 | 22 |
| 1.3840 This grade’s own name | 1.0883 | Unalloyed structural steels | ≤ 0.08 | — |
| 1.3843 This grade’s own name | 1.0884 | Unalloyed structural steels | — | — |
| 1.3845 This grade’s own name | 1.0885 | Unalloyed structural steels | — | — |
| 1.4000 | 1.4000 | Stainless steels | ≤ 0.08 | 16 |
| 1.4001 | 1.4001 | Stainless steels | ≤ 0.08 | 10 |
| 1.4001 | 1.4001 | Others | ≤ 0.08 | 8 |
| 1.4003 | 1.4003 | Stainless steels | ≤ 0.03 | 6 |
| 1.4005 | 1.4005 | Stainless steels | 0.08–0.15 | 14 |
| 1.4006 | 1.4006 | Stainless steels | 0.08–0.15 | 26 |
| 1.4016 | 1.4016 | Stainless steels | ≤ 0.08 | 18 |
| 1.4021 | 1.4021 | Stainless steels | 0.16–0.25 | 18 |
| 1.4027 | 1.4027 | Cast stainless steels | 0.16–0.23 | 14 |
| 1.4034 | 1.4034 | Stainless steels | 0.43–0.5 | 18 |
| 1.4057 | 1.4057 | Stainless steels | 0.12–0.22 | 17 |
| 1.4104 | 1.4104 | Stainless steels | 0.1–0.17 | 13 |
| 1.4113 | 1.4113 | Stainless steels | ≤ 0.08 | 10 |
| 1.4301 | 1.4301 | Stainless steels | ≤ 0.07 | 23 |
| 1.4305 | 1.4305 | Stainless steels | ≤ 0.1 | 17 |
| 1.4306 | 1.4306 | Stainless steels | ≤ 0.03 | 18 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.