DIN / EN · Europe · 3 designations

GX6CrNiN26-7

GX6CrNiN26-7 is a designation in DIN / EN for the material held under material number 1.4347, also listed as GX4CrNiN26-7. It is a material in the category Cast stainless steels. We list 3 designations recorded for this grade, in the standards DIN / EN.

Material no. 1.4347
Category Cast stainless steels · 87 grades
Designations 3

Search Inquiry Datasheet as PDFPrint-ready A4 documentGenerating …Download startedTry again

If you came for one of these

The most-used names for this grade.

DIN / ENGX4CrNiN26-7This grade’s own name

About Cast stainless steels

Cast stainless steels are stainless-steel materials produced by casting, combining corrosion resistance with the ability to form complex component shapes. Their composition and mechanical behaviour vary by grade, and they are used for corrosion-resistant cast components such as pumps, valves and process equipment.

This describes the material class as a whole. Always confirm the individual grade against the standard before ordering.

Also known as

3 designations · 1 standards · nothing hidden

This grade’s own namerecorded in our sources as this grade’s own designation under that standard.

Indicativetaken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.

Withdrawndesignation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.

DIN / ENEurope · 3

GX4CrNiN26-7This grade’s own name
GX6CrNiN26-7This grade’s own nameWithdrawn
GX8CrNiN26-7This grade’s own nameWithdrawn

Every designation on file is listed — no truncation, no “+ n more”. Each one is itself a route that leads back here.

Chemical composition

8 elements on file · weight %

What this alloy is

Iron — the balance, never listed by a standard — 64.2 %Cr — 26 %Ni — 6.5 %Si — 1.5 %Traces & impurities · 1.8 %

Logarithmic scale, 0.01 % to 100 % — every value here compares directly, decade by decade.

Element	% by weight
	≤ 0.05
	≤ 1.5
	≤ 1.5
	0.035
	0.02
	25–27
	5.5–7.5
	0.1–0.2

0.01 %0.1 %1 %10 %100 %

The scale is logarithmic, not the element’s raw share of the alloy — the only honest way to fit 0.01 % and 100 % in one picture, and it means every value here can be compared with every other.

Element	As publishedsource text, verbatim	Min% by weight	Max% by weight	Bound
C	≤0,05	—	0.050	Max
N	0,10-0,20	0.100	0.200	Range
Si	≤1,50	—	1.500	Max
P	0,035	0.035	0.035	Exact
S	0,02	0.020	0.020	Exact
Cr	25,0-27,0	25.000	27.000	Range
Mn	≤1,50	—	1.500	Max
Ni	5,50-7,50	5.500	7.500	Range

The published column is the source string byte-for-byte, decimal comma and all; Min and Max are the parsed bounds. Elements not listed have no value on file — they are omitted, never inferred.

Predicted transformation temperatures

Not enough recorded composition to predict a transformation temperature for this grade — missing: Mo.

Physical & mechanical properties

Density7,85g/cm³Exact

An absent property means we hold no value for it — it is left out rather than estimated, interpolated from a neighbouring grade, or filled from a handbook. It does not mean the property is undefined for the material.

Similar grades — and why

Selection rule, stated so you can disagree with it: same number class 1.4, a shared category, and a published range for Cr / Ni that overlaps this grade’s. These are neighbours in composition space — they are not equivalents, and none is claimed to be interchangeable with this grade.

GX2CrNiMoN26-7-41.4469

Cr 25,0-27,0 · Ni 6,00-8,00