DIN / EN · Europe · 2 designations

HX260LAD

HX260LAD is a designation in DIN / EN for the material held under material number 1.0929, also listed as H260LAD. It is a material in the category Higher strength steels. We list 2 designations recorded for this grade, in the standards DIN / EN.

Material no. 1.0929
Category Higher strength steels · 20 grades
Designations 2

Search Inquiry Datasheet as PDFPrint-ready A4 documentGenerating …Download startedTry again

About Higher strength steels

Higher strength steels are structural materials designed to carry greater loads than conventional structural steels while retaining useful ductility. They are used for load-bearing structures and components where higher strength can support efficient material use and durable fabricated designs.

This describes the material class as a whole. Always confirm the individual grade against the standard before ordering.

Also known as

2 designations · 1 standards · nothing hidden

This grade’s own namerecorded in our sources as this grade’s own designation under that standard.

Indicativetaken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.

Withdrawndesignation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.

DIN / ENEurope · 2

H260LADThis grade’s own nameWithdrawn
HX260LADThis grade’s own name

Every designation on file is listed — no truncation, no “+ n more”. Each one is itself a route that leads back here.

Chemical composition

8 elements on file · weight %

What this alloy is

Iron — the balance, never listed by a standard — 98.5 %Mn — 0.6 %Si — 0.5 %Ti — 0.1 %Traces & impurities · 0.3 %

Logarithmic scale, 0.01 % to 100 % — every value here compares directly, decade by decade.

Element	% by weight
	≤ 0.11
	≤ 0.5
	≤ 0.6
	0.03
	0.025
	≥ 0.015
	≤ 0.12
	≤ 0.09

0.01 %0.1 %1 %10 %100 %

The scale is logarithmic, not the element’s raw share of the alloy — the only honest way to fit 0.01 % and 100 % in one picture, and it means every value here can be compared with every other.

Element	As publishedsource text, verbatim	Min% by weight	Max% by weight	Bound
C	≤0,11	—	0.110	Max
Al	≥0,015	0.015	—	Min
Si	≤0,50	—	0.500	Max
P	0,03	0.030	0.030	Exact
S	0,025	0.025	0.025	Exact
Ti	≤0,12	—	0.120	Max
Mn	≤0,60	—	0.600	Max
Nb	≤0,09	—	0.090	Max

The published column is the source string byte-for-byte, decimal comma and all; Min and Max are the parsed bounds. Elements not listed have no value on file — they are omitted, never inferred.

Predicted transformation temperatures

Not enough recorded composition to predict a transformation temperature for this grade — missing: Ni, Cr, Mo.

Physical & mechanical properties

Density7,85g/cm³Exact

An absent property means we hold no value for it — it is left out rather than estimated, interpolated from a neighbouring grade, or filled from a handbook. It does not mean the property is undefined for the material.

Similar grades — and why

Selection rule, stated so you can disagree with it: same number class 1.0, a shared category, and a published range for Mn / Si that overlaps this grade’s. These are neighbours in composition space — they are not equivalents, and none is claimed to be interchangeable with this grade.

H 180 BD1.0914

Mn ≤0,70 · Si ≤0,50