DIN / EN · Europe · 2 designations

NiCr30Fe9Nb

NiCr30Fe9Nb is a material in the category Others, held under material number Ni 6152. Its recorded composition includes C ≤ 0.05%, Cr 28–31.5%, Mn ≤ 5%, Fe 7–12% and Ni ≥ 50%. We list one designation recorded for this grade, in the standard UNS. Its recorded density is 7.85 g/cm³.

Search Inquiry Datasheet as PDFPrint-ready A4 documentGenerating …Download startedTry again

If you came for one of these

The most-used names for this grade.

UNSW86152This grade’s own name

About Others

These are miscellaneous metallic alloys that do not fit a more specific material family and may be based on iron, nickel, cobalt, copper or other alloy systems. They are selected for applications requiring particular combinations of strength, hardness, toughness, wear resistance or resistance to demanding service conditions.

This describes the material class as a whole. Always confirm the individual grade against the standard before ordering.

Also known as

2 designations · 2 standards · nothing hidden

This grade’s own namerecorded in our sources as this grade’s own designation under that standard.

Indicativetaken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.

Withdrawndesignation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.

DIN / ENEurope · 1

NiCr30Fe9NbThis grade’s own name

UNSUnited States · 1

W86152This grade’s own name

Every designation on file is listed — no truncation, no “+ n more”. Each one is itself a route that leads back here.

Chemical composition

13 elements on file · weight %

What this alloy is

Iron — the balance, never listed by a standard — 10.6 %Ni — 50 %Cr — 29.8 %Mn — 5 %Traces & impurities · 4.6 %

Logarithmic scale, 0.01 % to 100 % — every value here compares directly, decade by decade.

Element	% by weight
	≤ 0.05
	≤ 0.8
	≤ 5 —
	0.02
	0.015
	28–31.5 —
	≤ 0.5
	≥ 50
	≤ 0.5
	≤ 0.5
	≤ 0.5
	1–2.5
	7–12

0.01 %0.1 %1 %10 %100 %

The scale is logarithmic, not the element’s raw share of the alloy — the only honest way to fit 0.01 % and 100 % in one picture, and it means every value here can be compared with every other.

Element	As publishedsource text, verbatim	Min% by weight	Max% by weight	Bound
C	≤0,05	—	0.050	Max
Al	≤0,50	—	0.500	Max
Si	≤0,80	—	0.800	Max
P	0,02	0.020	0.020	Exact
S	0,015	0.015	0.015	Exact
Ti	≤0,50	—	0.500	Max
Cr	28,0-31,5	28.000	31.500	Range
Mn	≤5,00	—	5.000	Max
Fe	7,00-12,0	7.000	12.000	Range
Ni	≥50,0	50.000	—	Min
Cu	≤0,50	—	0.500	Max
Nb	1,00-2,50	1.000	2.500	Range
Mo	≤0,50	—	0.500	Max

The published column is the source string byte-for-byte, decimal comma and all; Min and Max are the parsed bounds. Elements not listed have no value on file — they are omitted, never inferred.

Predicted transformation temperatures

Not enough recorded composition to predict a transformation temperature for this grade — missing: Ni.

Physical & mechanical properties

Density7,85g/cm³Exact

An absent property means we hold no value for it — it is left out rather than estimated, interpolated from a neighbouring grade, or filled from a handbook. It does not mean the property is undefined for the material.

Looking for this grade under another name?

Search the catalogue by designation, material number or composition — every name on this page is itself a way in.

Search Inquiry Datasheet as PDFPrint-ready A4 documentGenerating …Download startedTry again