DIN / EN steel grades — 4704 designations — Page 13
Every grade designated under DIN / EN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an asserted identity — the same grade under this standard’s own designation. 8 of 50 rows differ and carry an “Indicative” mark.
Also known as
4704 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| 27MnSiVS6 Withdrawn | 1.5232 | Others | 0.25–0.3 | — |
| 27NiCrMoV11-6 | 1.6948 | Others | 0.22–0.32 | — |
| 27NiCrMoV15-6 | 1.6957 | Quenched and tempered steels | 0.22–0.32 | 1 |
| 27NiCrMoV16-7 | 1.6963 | Others | 0.22–0.32 | — |
| 28B2 | 1.5510 | Others | 0.25–0.3 | — |
| 28Cr4 | 1.7030 | Quenched and tempered steels | 0.24–0.31 | 12 |
| 28CrMoNiV4-9 | 1.6985 | Others | 0.25–0.3 | — |
| 28CrS4 | 1.7036 | Case hardening steels | 0.24–0.31 | 3 |
| 28Mn6 | 1.1170 | Quenched and tempered steels | 0.25–0.32 | 16 |
| 28MnB5 | 1.0871 | Unalloyed structural steels | 0.25–0.32 | — |
| 28MnCr4-3 | 1.8734 | High-strength steels | ≤ 0.3 | — |
| 28NiCrMo4 | 1.6513 | Quenched and tempered steels | 0.24–0.34 | — |
| 28NiCrMo5-5 | 1.6732 | Others | 0.26–0.32 | — |
| 28NiCrMoV10 | 1.2740 | Tool steels for hot work | 0.24–0.32 | 1 |
| 28NiCrMoV8-5 | 1.6932 | Quenched and tempered steels | 0.24–0.32 | — |
| 28NiCrV5 | 1.2737 | Tool steels for hot work | 0.24–0.32 | — |
| 28NiMo17 | 1.2747 | Tool steels for hot work | 0.24–0.31 | 1 |
| 29CrMoV9 | 1.2307 | Tool steels for cold work | 0.26–0.34 | — |
| 29CrNiMo8 Withdrawn | 1.6585 | Others | 0.26–0.33 | — |
| 2WGr.50/50T Indicative | 1.8808 | Others | ≤ 0.14 | 2 |
| 2WGr.50/50T Indicative | 1.8810 | Others | ≤ 0.14 | 3 |
| 2WGr.50/50T Indicative | 1.8806 | Others | ≤ 0.14 | 3 |
| 2WGr.50/50T Indicative | 1.8809 | Others | ≤ 0.14 | 3 |
| 2YGr.60 Indicative | 1.8830 | Others | ≤ 0.14 | 2 |
| 2YGr.60 Indicative | 1.8857 | Others | ≤ 0.14 | 2 |
| 2YGr.60 Indicative | 1.8878 | Others | ≤ 0.14 | 3 |
| 2YGr.60 Indicative | 1.8887 | Others | ≤ 0.14 | 3 |
| 300-...-TF 182 | 1.0281 | Unalloyed structural steels | — | — |
| 300-...-TG 180 | 1.0271 | Unalloyed structural steels | — | — |
| 30CrMo4 | 1.7216 | Low-temperature structural steels | 0.27–0.34 | 9 |
| 30CrMo5-2 | 1.7263 | Others | 0.27–0.32 | — |
| 30CrMoNiV5-11 | 1.6946 | Others | 0.28–0.34 | — |
| 30CrMoV9 | 1.7707 | Quenched and tempered steels | 0.26–0.34 | 8 |
| 30CrNiMo5-5 | 1.6568 | Others | 0.27–0.32 | — |
| 30CrNiMo8 | 1.6580 | Quenched and tempered steels | 0.26–0.34 | 15 |
| 30Mn4 | 1.1146 | Others | 0.26–0.34 | 2 |
| 30Mn5 | 1.1173 | Quenched and tempered steels | 0.27–0.34 | 7 |
| 30Mn7 | 1.5067 | Others | 0.28–0.33 | — |
| 30MnB4 | 1.5526 | Others | 0.27–0.32 | 5 |
| 30MnB5 | 1.5531 | Quenched and tempered steels | 0.27–0.33 | 5 |
| 30MnCrB4-2 | 1.7148 | Others | 0.28–0.33 | — |
| 30MnCrTi4 | 1.8401 | Others | 0.25–0.35 | 1 |
| 30MnVS6 | 1.1302 | Others | 0.26–0.33 | — |
| 30MoB1 | 1.5408 | Heat-resistant structural steels | 0.28–0.32 | — |
| 30NiCr11 Withdrawn | 1.5737 | Others | 0.27–0.34 | — |
| 30NiCrMo14-5 | 1.6947 | Others | 0.27–0.32 | — |
| 30NiCrMo16-6 | 1.6747 | Quenched and tempered steels | 0.26–0.33 | 6 |
| 30NiCrMo2-2 | 1.6545 | Others | 0.27–0.34 | 3 |
| 30NiCrMo9-5 | 1.6739 | Others | 0.27–0.32 | — |
| 30WCrV15-1 | 1.2564 | Tool steels for hot work | 0.25–0.35 | 2 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.