DIN / EN steel grades — 4704 designations — Page 15
Every grade designated under DIN / EN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an asserted identity — the same grade under this standard’s own designation. 2 of 50 rows differ and carry an “Indicative” mark.
Also known as
4704 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| 34CrNiMo6 | 1.6582 | Quenched and tempered steels | 0.3–0.38 | 25 |
| 34CrNiMo6S | 1.6589 | Others | 0.3–0.38 | — |
| 34CrS4 | 1.7037 | Quenched and tempered steels | 0.3–0.37 | 8 |
| 34Mn5 | 1.1166 | Others | 0.3–0.37 | 4 |
| 34Ni5 | 1.5620 | Low-temperature structural steels | 0.3–0.38 | — |
| 35 NiCr 14 8 Withdrawn | 1.5952 | Others | 0.3–0.38 | — |
| 35 S 20 | 1.0726 | Free cutting steels | 0.32–0.39 | 15 |
| 35 SPb 20 | 1.0756 | Free cutting steels | 0.32–0.39 | — |
| 350-...-TF 181 | 1.0282 | Unalloyed structural steels | — | — |
| 350-...-TG 179 | 1.0272 | Unalloyed structural steels | — | — |
| 35B2 | 1.5511 | Others | 0.32–0.39 | 3 |
| 35CrMo4 | 1.2330 | Others | 0.32–0.37 | 8 |
| 35CrMo7 | 1.2302 | Others | 0.3–0.4 | — |
| 35CrNiMo6 | 1.6583 | Others | 0.3–0.38 | — |
| 35CrNiMoV8 | 1.6935 | Others | 0.3–0.4 | — |
| 35NCD16 Indicative | 1.6773 | Quenched and tempered steels | 0.32–0.39 | 5 |
| 35NiCr18 Withdrawn | 1.5864 | Quenched and tempered steels | 0.3–0.4 | 2 |
| 35NiCr6 | 1.5815 | Others | 0.3–0.37 | 5 |
| 35NiCrMo16 | 1.2766 | Tool steels for hot work | 0.32–0.38 | 5 |
| 35NiCrMoV11-5 | 1.6949 | Others | 0.3–0.4 | — |
| 35NiCrMoV12-5 | 1.6959 | Special steels for defense technology | 0.3–0.4 | 1 |
| 35WCrV7 | 1.2541 | Tool steels for cold work | 0.3–0.4 | — |
| 35WCrV7 Indicative | — | — | 0.35–0.45 | 5 |
| 36 SMn 14 | 1.0764 | Free cutting steels | 0.32–0.39 | 4 |
| 36 SMnPb 14 | 1.0765 | Free cutting steels | 0.32–0.39 | 2 |
| 36CrB2 Withdrawn | 1.7072 | Others | 0.32–0.4 | — |
| 36CrB4 | 1.7077 | Others | 0.34–0.38 | 1 |
| 36CrNiMo4 | 1.6511 | Quenched and tempered steels | 0.32–0.4 | 18 |
| 36Mn4 | 1.0561 | Others | 0.32–0.4 | 2 |
| 36Mn5 | 1.1167 | Quenched and tempered steels | 0.32–0.4 | 17 |
| 36Mn6 Withdrawn | 1.1127 | Quenched and tempered steels | 0.34–0.42 | 6 |
| 36Mn7 | 1.5069 | High-strength steels | 0.35 | 7 |
| 36MnB4 | 1.5537 | Others | 0.33–0.38 | — |
| 36NiCr10 Withdrawn | 1.5736 | Quenched and tempered steels | 0.32–0.4 | 3 |
| 36NiCr6 Withdrawn | 1.5710 | Quenched and tempered steels | 0.32–0.4 | 14 |
| 36NiCrMo16 | 1.6773 | Quenched and tempered steels | 0.32–0.39 | 5 |
| 37 S 10 | 1.0713 | Free cutting steels | 0.32–0.39 | 1 |
| 37Cr4 | 1.7034 | Quenched and tempered steels | 0.34–0.41 | 23 |
| 37CrB1 | 1.7007 | Others | 0.35–0.4 | 4 |
| 37CrMo3 Withdrawn | 1.7315 | Others | 0.33–0.41 | — |
| 37CrMo4 | 1.7202 | Others | 0.35–0.4 | 1 |
| 37CrMoS3 | 1.7315 | Others | 0.33–0.41 | — |
| 37CrS4 | 1.7038 | Quenched and tempered steels | 0.34–0.41 | 7 |
| 37Mn6 | 1.1235 | Others | 0.32–0.42 | — |
| 37MnB4 | 1.5524 | Others | 0.34–0.4 | — |
| 37MnB5 | 1.5538 | Others | 0.35–0.4 | — |
| 37MnSi5 | 1.5122 | Quenched and tempered steels | 0.33–0.41 | 6 |
| 37Mo2 | 1.5418 | Heat-resistant structural steels | 0.35–0.4 | — |
| 38 SMn 28 | 1.0760 | Free cutting steels | 0.35–0.4 | 2 |
| 38 SMnPb 28 | 1.0761 | Free cutting steels | 0.35–0.4 | — |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.