DIN / EN steel grades — 4704 designations — Page 23
Every grade designated under DIN / EN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an asserted identity — the same grade under this standard’s own designation. 5 of 50 rows differ and carry an “Indicative” mark.
Also known as
4704 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| ASP2005 Withdrawn | 1.3377 | High-speed steels | 1.45–1.55 | — |
| ASP2012 Withdrawn | 1.3397 | High-speed steels | 0.55–0.65 | — |
| ASP2015 Withdrawn | 1.3251 | High-speed steels | 1.5–1.6 | — |
| ASP2017 Withdrawn | 1.3288 | High-speed steels | 0.75–0.85 | — |
| ASP2023 Withdrawn | 1.3394 | High-speed steels | 1.15–1.25 | — |
| ASP2030 Withdrawn | 1.3294 | High-speed steels | 1.23–1.33 | — |
| ASP2052 Withdrawn | 1.3253 | High-speed steels | 1.55–1.65 | — |
| ASP2053 Withdrawn | 1.3352 | High-speed steels | 2.42–2.48 | — |
| ASP2060 Withdrawn | 1.3292 | High-speed steels | 2.2–2.4 | — |
| ASt35 Indicative | 1.0345 | Heat-resistant structural steels | ≤ 0.16 | 18 |
| ASt41 Indicative | 1.0437 | Others | ≤ 0.2 | 8 |
| ASt45 Indicative | 1.0481 | Heat-resistant structural steels | 0.08–0.2 | 17 |
| ASt52 Indicative | 1.0577 | Unalloyed structural steels | ≤ 0.2 | 11 |
| At 35-3 | 1.0209 | Unalloyed structural steels | 0.06–0.12 | — |
| B 420 N | 1.0428 | Others | ≤ 0.22 | — |
| B 500 A | 1.0438 | Others | ≤ 0.22 | — |
| B 500 B | 1.0439 | Others | ≤ 0.22 | — |
| B 500 G 1 | 1.0464 | Others | ≤ 0.15 | — |
| B 500 G 2 | 1.0465 | Others | ≤ 0.15 | — |
| B 500 G 3 | 1.0466 | Others | ≤ 0.15 | — |
| B 500 H | 1.0439 | Others | ≤ 0.22 | — |
| B 500 N | 1.0438 | Others | ≤ 0.22 | — |
| B1100 | 1.8816 | Others | 0.3 | — |
| BSt 420 S | 1.0428 | Others | ≤ 0.22 | — |
| BSt 500 G | 1.0464 | Others | ≤ 0.15 | — |
| BSt 500 M | 1.0466 | Others | ≤ 0.15 | — |
| BSt 500 P | 1.0465 | Others | ≤ 0.15 | — |
| BSt 500 S | 1.0438 | Others | ≤ 0.22 | — |
| C10 | 1.0301 | Case hardening steels | 0.07–0.13 | 20 |
| C100S | 1.1274 | Spring steels | 0.95–1.05 | 13 |
| C105U | 1.1545 | Unalloyed tool steels / carbon steels | 1–1.1 | 19 |
| C105W1 Withdrawn | 1.1545 | Unalloyed tool steels / carbon steels | 1–1.1 | 19 |
| C105W2 | 1.1645 | Unalloyed tool steels / carbon steels | 1–1.1 | 18 |
| C105W2 Indicative | 1.1535 | Unalloyed tool steels / carbon steels | 0.85–0.95 | 14 |
| C10C | 1.0214 | Unalloyed structural steels | 0.08–0.12 | 4 |
| C10C Withdrawn | 1.1122 | Others | 0.08–0.12 | — |
| C10D | 1.0310 | Unalloyed structural steels | 0.08–0.13 | 5 |
| C10D2 | 1.1114 | Case hardening steels | 0.08–0.12 | 2 |
| C10E | 1.1121 | Case hardening steels | 0.07–0.13 | 22 |
| C10E2C | 1.1122 | Others | 0.08–0.12 | — |
| C10EW | 1.1115 | Others | 0.08–0.12 | — |
| C10G1 | 1.0207 | Unalloyed structural steels | 0.06–0.14 | — |
| C10G2 | 1.0208 | Unalloyed structural steels | 0.06–0.12 | — |
| C10GPb | 1.0302 | Case hardening steels | 0.07–0.13 | — |
| C10PB | 1.0302 | Case hardening steels | 0.07–0.13 | — |
| C10R | 1.1207 | Case hardening steels | 0.07–0.13 | 5 |
| C10RG1 | 1.0702 | Free cutting steels | ≤ 0.15 | 2 |
| C10RG2 | 1.0703 | Free cutting steels | ≤ 0.15 | 2 |
| C10Wsi | 1.0339 | Unalloyed structural steels | 0.07–0.11 | — |
| C10Wsi | 1.0351 | Others | 0.07–0.11 | — |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.