DIN / EN steel grades — 4704 designations — Page 26
Every grade designated under DIN / EN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an asserted identity — the same grade under this standard’s own designation. 1 of 50 rows differ and carry an “Indicative” mark.
Also known as
4704 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| C45E | 1.1191 | Quenched and tempered steels | 0.42–0.5 | 21 |
| C45E Indicative | 1.1191 | Others | 0.42–0.5 | 18 |
| C45EC | 1.1192 | Cold extrusion steels | 0.42–0.5 | 2 |
| C45EPb | 1.1195 | Others | 0.42–0.5 | — |
| C45G Withdrawn | 1.1193 | Steels for surface hardening | 0.43–0.49 | 3 |
| C45GPb | 1.0504 | Others | 0.42–0.5 | — |
| C45Pb | 1.0504 | Others | 0.42–0.5 | — |
| C45R | 1.1201 | Quenched and tempered steels | 0.42–0.5 | 11 |
| C45RC | 1.1061 | Others | 0.42–0.5 | — |
| C45U | 1.1730 | Unalloyed tool steels / carbon steels | 0.42–0.5 | 14 |
| C45W Withdrawn | 1.1730 | Unalloyed tool steels / carbon steels | 0.42–0.5 | 14 |
| C46 | 1.0526 | Others | 0.45 | — |
| C46D2 | 1.1162 | Quenched and tempered steels | 0.44–0.48 | 2 |
| C48D | 1.0517 | Others | 0.45–0.5 | — |
| C48D2 | 1.1164 | Others | 0.46–0.5 | — |
| C48EMn | 1.1198 | Others | 0.45–0.51 | — |
| C4C | 1.0303 | Unalloyed structural steels | 0.02–0.06 | — |
| C4D | 1.0300 | Unalloyed structural steels | ≤ 0.06 | — |
| C4D1 | 1.1188 | Others | ≤ 0.06 | — |
| C5 | 1.0878 | Unalloyed structural steels | — | — |
| C50 | 1.0540 | Quenched and tempered steels | 0.47–0.55 | 13 |
| C50D | 1.0586 | Steels for surface hardening | 0.48–0.53 | 7 |
| C50D2 | 1.1171 | Others | 0.48–0.52 | 6 |
| C50E | 1.1206 | Quenched and tempered steels | 0.47–0.55 | 17 |
| C50R | 1.1241 | Steels for surface hardening | 0.47–0.55 | 8 |
| C52D | 1.0588 | Others | 0.5–0.55 | — |
| C52D2 | 1.1202 | Others | 0.5–0.54 | — |
| C53E | 1.1210 | Steels for surface hardening | 0.5–0.57 | 8 |
| C53E Withdrawn | 1.1213 | Steels for surface hardening | 0.5–0.57 | 11 |
| C53G Withdrawn | 1.1213 | Steels for surface hardening | 0.5–0.57 | 11 |
| C53R | 1.1205 | Others | 0.5–0.55 | — |
| C55 | 1.0535 | Quenched and tempered steels | 0.52–0.6 | 21 |
| C55E | 1.1203 | Quenched and tempered steels | 0.52–0.6 | 15 |
| C55GPb | 1.0537 | Others | 0.52–0.6 | — |
| C55Pb | 1.0537 | Others | 0.52–0.6 | — |
| C55R | 1.1209 | Others | 0.52–0.6 | 8 |
| C55S | 1.1204 | Others | 0.52–0.6 | 5 |
| C55W Withdrawn | 1.1820 | Unalloyed tool steels / carbon steels | 0.5–0.58 | 1 |
| C56 | 1.0527 | Others | 0.55 | — |
| C56 D | 1.0518 | Others | 0.53–0.58 | — |
| C56D2 | 1.1220 | Others | 0.54–0.58 | 2 |
| C56E2 | 1.1219 | Unalloyed bearing steels | 0.52–0.6 | 3 |
| C58D | 1.0609 | Quenched and tempered steels | 0.55–0.6 | 2 |
| C58D2 | 1.1212 | Others | 0.56–0.6 | 5 |
| C5D2 | 1.1111 | Others | ≤ 0.07 | 3 |
| C5E | 1.1010 | Others | ≤ 0.07 | — |
| C60 | 1.0601 | Quenched and tempered steels | 0.57–0.65 | 25 |
| C60D | 1.0610 | Quenched and tempered steels | 0.58–0.63 | 2 |
| C60D2 | 1.1228 | Others | 0.58–0.62 | 5 |
| C60D3 | 1.1229 | Others | 0.55–0.65 | — |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.