DIN / EN steel grades — 4704 designations — Page 70
Every grade designated under DIN / EN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an asserted identity — the same grade under this standard’s own designation. 2 of 50 rows differ and carry an “Indicative” mark.
Also known as
4704 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| S420G5+QT | 1.8853 | Others | ≤ 0.16 | — |
| S420G6+QT | 1.8852 | Others | ≤ 0.16 | — |
| S420GO1 Withdrawn | 1.8854 | Others | ≤ 0.16 | — |
| S420GO2 Withdrawn | 1.8855 | Others | ≤ 0.14 | — |
| S420GO3 | 1.8856 | Others | ≤ 0.12 | — |
| S420M | 1.8825 | Others | ≤ 0.16 | 2 |
| S420MC | 1.0980 | Fine-grain steels for cold forming | ≤ 0.12 | 8 |
| S420MH | 1.8847 | Others | ≤ 0.16 | — |
| S420ML | 1.8836 | Fine-grain structural steels | ≤ 0.16 | 3 |
| S420MLH | 1.8848 | Others | ≤ 0.16 | — |
| S420N | 1.8902 | Fine-grain structural steels | ≤ 0.2 | 19 |
| S420NC | 1.0981 | Fine-grain steels for cold forming | ≤ 0.2 | — |
| S420NH | 1.8750 | High-strength steels | ≤ 0.22 | — |
| S420NL | 1.8912 | Fine-grain structural steels | ≤ 0.2 | 5 |
| S420NL1 | 1.8913 | Fine-grain structural steels | ≤ 0.2 | 1 |
| S420NLH | 1.8751 | High-strength steels | ≤ 0.22 | — |
| S430GP | 1.0523 | Others | ≤ 0.24 | 2 |
| S450J0 | 1.0590 | Unalloyed structural steels | ≤ 0.2 | 2 |
| S455MC Withdrawn | 1.0959 | High-strength multi-phase steels | ≤ 0.18 | — |
| S460G1 Indicative | 1.8878 | Others | ≤ 0.14 | 3 |
| S460G1+M | 1.8878 | Others | ≤ 0.14 | 3 |
| S460G1+QT | 1.8878 | Others | ≤ 0.14 | 3 |
| S460G2 Indicative | 1.8887 | Others | ≤ 0.14 | 3 |
| S460G2+M | 1.8887 | Others | ≤ 0.14 | 3 |
| S460G2+QT | 1.8887 | Others | ≤ 0.14 | 3 |
| S460G3 | 1.8883 | Others | ≤ 0.14 | 2 |
| S460G3+M | 1.8883 | Others | ≤ 0.14 | 2 |
| S460G4 | 1.8889 | Others | ≤ 0.14 | 2 |
| S460G4+M | 1.8889 | Others | ≤ 0.14 | 2 |
| S460G5+QT | 1.8885 | Others | ≤ 0.16 | — |
| S460G6+QT | 1.8884 | Others | ≤ 0.16 | — |
| S460M | 1.8827 | Others | ≤ 0.16 | 5 |
| S460MC | 1.0982 | Fine-grain steels for cold forming | ≤ 0.12 | 5 |
| S460MH | 1.8849 | Others | ≤ 0.16 | — |
| S460ML | 1.8838 | Others | ≤ 0.16 | 4 |
| S460MLH | 1.8850 | Others | ≤ 0.16 | 1 |
| S460N | 1.8901 | Fine-grain structural steels | ≤ 0.2 | 7 |
| S460NC | 1.0983 | Fine-grain steels for cold forming | ≤ 0.21 | — |
| S460NH | 1.8953 | Others | ≤ 0.22 | 1 |
| S460NL | 1.8903 | Fine-grain structural steels | ≤ 0.2 | 4 |
| S460NLH | 1.8956 | Others | ≤ 0.22 | — |
| S460Q | 1.8908 | Others | ≤ 0.2 | 3 |
| S460QL | 1.8906 | Others | ≤ 0.2 | 3 |
| S460QL1 | 1.8916 | Others | ≤ 0.2 | 1 |
| S495MC Withdrawn | 1.0950 | Fine-grain steels for cold forming | ≤ 0.22 | — |
| S500A | 1.8980 | Others | 0.03–0.12 | — |
| S500AL | 1.8990 | Others | 0.03–0.12 | — |
| S500M | 1.8829 | Others | ≤ 0.16 | — |
| S500MC | 1.0984 | Fine-grain steels for cold forming | ≤ 0.12 | 6 |
| S500ML | 1.8839 | Others | ≤ 0.15 | — |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.