DIN / EN steel grades — 4704 designations — Page 72
Every grade designated under DIN / EN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an asserted identity — the same grade under this standard’s own designation. 1 of 50 rows differ and carry an “Indicative” mark.
Also known as
4704 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| S790QL1 | 1.8939 | Others | ≤ 0.18 | — |
| S800QL | 1.8770 | High-strength steels | ≤ 0.2 | — |
| S800QL1 | 1.8780 | High-strength steels | ≤ 0.2 | — |
| S890G1QL | 1.8796 | High-strength steels | 0.14–0.18 | — |
| S890Q | 1.8940 | Others | ≤ 0.2 | — |
| S890QL | 1.8983 | High-strength steels | ≤ 0.2 | — |
| S890QL1 | 1.8925 | High-strength steels | ≤ 0.2 | — |
| S900MC Withdrawn | 1.0965 | Others | ≤ 0.25 | — |
| S900QC Withdrawn | 1.0965 | Others | ≤ 0.25 | — |
| S940MC Withdrawn | 1.0967 | Fine-grain steels for cold forming | ≤ 0.18 | — |
| S940QC Withdrawn | 1.0967 | Fine-grain steels for cold forming | ≤ 0.18 | — |
| S960G1QL | 1.8797 | High-strength steels | ≤ 0.2 | — |
| S960Q | 1.8941 | Others | ≤ 0.2 | — |
| S960QL | 1.8933 | High-strength steels | ≤ 0.2 | 1 |
| S960QL1 | 1.8934 | Others | ≤ 0.2 | — |
| SAE 1005 | 1.9313 | Others | ≤ 0.06 | 2 |
| SAE 1006 | 1.9314 | Others | ≤ 0.08 | 3 |
| SAE 1008 | 1.9325 | Others | ≤ 0.1 | 2 |
| SAE 1010 | 1.9301 | Case hardening steels | 0.08–0.13 | 2 |
| SAE 1012 | 1.9311 | Others | 0.1–0.15 | 4 |
| SAE 1015 | 1.9401 | Others | 0.13–0.18 | 2 |
| SAE 1016 | 1.9401 | Others | 0.13–0.18 | 2 |
| SAE 1017 | 1.9413 | Others | 0.15–0.2 | 4 |
| SAE 1018 | 1.9413 | Others | 0.15–0.2 | 3 |
| SAE 1019 | 1.9413 | Others | 0.15–0.2 | 2 |
| SAE 1020 | 1.9402 | Quenched and tempered steels | 0.18–0.23 | 2 |
| SAE 1025 | 1.9415 | Quenched and tempered steels | 0.22–0.28 | 6 |
| SAE 1026 | 1.9415 | Others | 0.22–0.28 | 2 |
| SAE 1027 | 1.9426 | Others | 0.24–0.3 | 1 |
| SAE 1029 | 1.9416 | Others | 0.25–0.31 | 4 |
| SAE 1030 | 1.9416 | Quenched and tempered steels | 0.28–0.34 | 7 |
| SAE 1033 | 1.9500 | Others | 0.3–0.36 | 2 |
| SAE 1037 | 1.9501 | Others | 0.32–0.38 | 2 |
| SAE 1039 | 1.9502 | Quenched and tempered steels | 0.37–0.44 | 2 |
| SAE 1042 | 1.9503 | Quenched and tempered steels | 0.4–0.47 | 2 |
| SAE 1045 | 1.9504 | Others | 0.43–0.5 | 3 |
| SAE 1049 | 1.9505 | Others | 0.46–0.53 | 6 |
| SAE 1055 | 1.9518 | Others | 0.5–0.6 | 2 |
| SAE 1060 | 1.9601 | Quenched and tempered steels | 0.55–0.65 | 2 |
| SAE 1070 | 1.9613 | Others | 0.65–0.75 | 2 |
| SAE 1074 | 1.9614 | Spring steels | 0.7–0.8 | 2 |
| SAE 1080 | 1.9615 | Spring steels | 0.75–0.88 | 5 |
| SAE 1095 | 1.9618 | Others | 0.9–1.03 | 5 |
| SAE 1117 | 1.9705 | Others | 0.14–0.2 | 3 |
| SAE 1137 | 1.9737 | Others | 0.32–0.39 | 3 |
| SAE 1146 | 1.9708 | Others | 0.42–0.49 | 2 |
| SAE 1215 | 1.9704 | Free cutting steels | ≤ 0.09 | 3 |
| SAE 12L14 | 1.9718 | Others | ≤ 0.15 | 2 |
| SAE 945 Withdrawn | 1.9403 | Others | ≤ 0.15 | — |
| SAE1010 Indicative | 1.0330 | Unalloyed structural steels | ≤ 0.12 | 17 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.