DIN / EN · Europe · 8 designations

ZSt 50-2

E295GC is a material in the category Others, held under material number 1.0533. Its recorded composition includes N 0.012%, P 0.045% and S 0.045%. We list 7 designations recorded for this grade, in the standards DIN / EN, AFNOR, GB and UNI. Recorded mechanical properties include Rm 470–950 N/mm², A 6–9% and HB 140–181; these figures vary with the delivery condition and dimension. Its recorded density is 7.85 g/cm³.

Search Inquiry Datasheet as PDFPrint-ready A4 documentGenerating …Download startedTry again

If you came for one of these

The most-used names for this grade.

DIN / ENE295GCThis grade’s own name

About Others

These are miscellaneous metallic alloys that do not fit a more specific material family and may be based on iron, nickel, cobalt, copper or other alloy systems. They are selected for applications requiring particular combinations of strength, hardness, toughness, wear resistance or resistance to demanding service conditions.

This describes the material class as a whole. Always confirm the individual grade against the standard before ordering.

Also known as

8 designations · 4 standards · nothing hidden

This grade’s own namerecorded in our sources as this grade’s own designation under that standard.

Indicativetaken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.

Withdrawndesignation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.

DIN / ENEurope · 5

AFNORFrance · 1

A50-2Indicative

GBChina · 1

Q275Indicative

UNIItaly · 1

Fe490Indicative

Every designation on file is listed — no truncation, no “+ n more”. Each one is itself a route that leads back here.

Chemical composition

3 elements on file · weight %

What this alloy is

Iron — the balance, never listed by a standard — 99.9 %P — 0 %S — 0 %N — 0 %

Logarithmic scale, 0.01 % to 100 % — every value here compares directly, decade by decade.

Element	% by weight
	0.045
	0.045
	0.012

0.01 %0.1 %1 %10 %100 %

The scale is logarithmic, not the element’s raw share of the alloy — the only honest way to fit 0.01 % and 100 % in one picture, and it means every value here can be compared with every other.

Element	As publishedsource text, verbatim	Min% by weight	Max% by weight	Bound
N	0,012	0.012	0.012	Exact
P	0,045	0.045	0.045	Exact
S	0,045	0.045	0.045	Exact

The published column is the source string byte-for-byte, decimal comma and all; Min and Max are the parsed bounds. Elements not listed have no value on file — they are omitted, never inferred.

Predicted transformation temperatures

Not enough recorded composition to predict a transformation temperature for this grade — missing: C, Mn, Si, Ni, Cr, Mo.

Physical & mechanical properties

Density7,85g/cm³Exact

An absent property means we hold no value for it — it is left out rather than estimated, interpolated from a neighbouring grade, or filled from a handbook. It does not mean the property is undefined for the material.

Properties by condition

2 conditions · 11 values

By thicknessCold drawn / hardsource steelnumber

Thicknessmm	RmN/mm²	A%
5 – 10	650 – 950	6
10 – 16	600 – 900	7
16 – 40	550 – 850	8
40 – 63	520 – 770	9
63 – 100	470 – 740	9

By delivery stateAs rolled and turnedsource steelnumber

Delivery state	HB
As rolled and turned	140 – 181

Every figure holds only for the condition on its own row. Values are never merged across conditions or across sources, never averaged, and never interpolated between two rows. An em dash means no value on file — never zero. Figures are converted to the unit in the column header; the source’s own wording is kept and shown where the two differ.

Looking for this grade under another name?

Search the catalogue by designation, material number or composition — every name on this page is itself a way in.

Search Inquiry Datasheet as PDFPrint-ready A4 documentGenerating …Download startedTry again