JIS steel grades — 2322 designations — Page 45
Every grade designated under JIS, with the identifying and comparative data we hold for each. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an asserted identity — the same grade under this standard’s own designation. 17 of 50 rows differ and carry an “Indicative” mark.
Also known as
2322 designations| Grade | Category | C% by weight | Also inother standards |
|---|---|---|---|
| SWRCH15A Indicative | Unalloyed structural steels | 0.13–0.17 | 7 |
| SWRCH15K | Cold extrusion steels | 0.13–0.18 | 1 |
| SWRCH15K Indicative | Unalloyed structural steels | 0.13–0.17 | 7 |
| SWRCH15R | Cold extrusion steels | 0.13–0.18 | 1 |
| SWRCH16A | Cold extrusion steels | 0.13–0.18 | 1 |
| SWRCH16K | Cold extrusion steels | 0.13–0.18 | 1 |
| SWRCH16R Indicative | Unalloyed structural steels | 0.13–0.17 | 7 |
| SWRCH17K | Cold extrusion steels | 0.15–0.2 | 1 |
| SWRCH17R | Cold extrusion steels | 0.15–0.2 | 1 |
| SWRCH18A | Cold extrusion steels | 0.15–0.2 | 1 |
| SWRCH18A Indicative | — | 0.15–0.2 | 4 |
| SWRCH18K | Cold extrusion steels | 0.15–0.2 | 1 |
| SWRCH19A | Cold extrusion steels | 0.15–0.2 | 1 |
| SWRCH20A | Cold extrusion steels | 0.18–0.23 | 1 |
| SWRCH20A Indicative | — | 0.18–0.23 | 4 |
| SWRCH20K | Cold extrusion steels | 0.18–0.23 | 1 |
| SWRCH20K Indicative | — | 0.18–0.23 | 5 |
| SWRCH22A | Cold extrusion steels | 0.18–0.23 | 1 |
| SWRCH22K | Cold extrusion steels | 0.18–0.23 | 1 |
| SWRCH22K Indicative | — | 0.18–0.23 | 5 |
| SWRCH24K | Cold extrusion steels | 0.19–0.25 | 1 |
| SWRCH25A | Cold extrusion steels | 0.22–0.28 | 1 |
| SWRCH25K | Cold extrusion steels | 0.22–0.28 | 1 |
| SWRCH25K Indicative | Quenched and tempered steels | 0.22–0.29 | 20 |
| SWRCH27K | Cold extrusion steels | 0.22–0.29 | 1 |
| SWRCH30K | Cold extrusion steels | 0.27–0.33 | 1 |
| SWRCH30K Indicative | Quenched and tempered steels | 0.27–0.34 | 14 |
| SWRCH33K | Cold extrusion steels | 0.3–0.36 | 1 |
| SWRCH33K Indicative | Quenched and tempered steels | 0.27–0.34 | 14 |
| SWRCH35K | Cold extrusion steels | 0.32–0.38 | 1 |
| SWRCH35K Indicative | Quenched and tempered steels | 0.32–0.39 | 23 |
| SWRCH38K | Cold extrusion steels | 0.35–0.41 | 1 |
| SWRCH38K Indicative | Quenched and tempered steels | 0.37–0.44 | 21 |
| SWRCH38K Indicative | Quenched and tempered steels | 0.32–0.39 | 23 |
| SWRCH40K | Cold extrusion steels | 0.37–0.43 | 1 |
| SWRCH40K Indicative | Quenched and tempered steels | 0.37–0.44 | 21 |
| SWRCH41K | Cold extrusion steels | 0.36–0.44 | 1 |
| SWRCH43K | Cold extrusion steels | 0.4–0.46 | 1 |
| SWRCH45K | Cold extrusion steels | 0.42–0.48 | 1 |
| SWRCH45K Indicative | Quenched and tempered steels | 0.42–0.5 | 24 |
| SWRCH48K | Cold extrusion steels | 0.45–0.51 | 1 |
| SWRCH48K Indicative | Quenched and tempered steels | 0.42–0.5 | 24 |
| SWRCH50K | Cold extrusion steels | 0.47–0.53 | 1 |
| SWRCH6A | Cold extrusion steels | ≤ 0.08 | 1 |
| SWRCH6R | Cold extrusion steels | ≤ 0.08 | 1 |
| SWRCH8A | Cold extrusion steels | ≤ 0.1 | 1 |
| SWRCH8R | Cold extrusion steels | ≤ 0.1 | 1 |
| SWRCH8R Indicative | Unalloyed structural steels | ≤ 0.12 | 17 |
| SWRCHB223 | Cold extrusion steels | 0.2–0.26 | 1 |
| SWRCHB237 | Cold extrusion steels | 0.34–0.4 | 1 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.