KS · South Korea · 14 designations

SWRCH15A

SWRCH15A is a designation in KS for the material held under material number 1.0234, also listed as QSt 38-3. It is a material in the category Unalloyed structural steels. We list 14 designations recorded for this grade, in the standards DIN / EN, ASTM, ISO, JIS, GB, GOST, UNI and KS.

Material no. 1.0234
Category Unalloyed structural steels · 452 grades
Designations 14

Search Inquiry Datasheet as PDFPrint-ready A4 documentGenerating …Download startedTry again

If you came for one of these

The most-used names for this grade.

DIN / ENC15CThis grade’s own name

About Unalloyed structural steels

Unalloyed structural steels include all low-carbon steels in which the iron companions do not exceed specified minimum values. The yield strength, formability and weldability are the decisive factors for their use. They are soft, pliable, tough and stretchy, but cannot be hardened by heat treatment.

This describes the material class as a whole. Always confirm the individual grade against the standard before ordering.

Also known as

14 designations · 8 standards · nothing hidden

This grade’s own namerecorded in our sources as this grade’s own designation under that standard.

Indicativetaken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.

Withdrawndesignation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.

DIN / ENEurope · 3

ASTMUnited States · 2

ISOInternational · 1

C15GCIndicative

JISJapan · 3

SWRCH15AIndicative
SWRCH15KIndicative
SWRCH16RIndicative

GBChina · 1

ML15Indicative

GOSTRussia / CIS · 2

UNIItaly · 1

CB 15Indicative

KSSouth Korea · 1

SWRCH15AThis grade’s own name

Every designation on file is listed — no truncation, no “+ n more”. Each one is itself a route that leads back here.

Chemical composition

6 elements on file · weight %

What this alloy is

Iron — the balance, never listed by a standard — 99.2 %Mn — 0.5 %C — 0.2 %Si — 0.1 %Traces & impurities · 0.1 %

Logarithmic scale, 0.01 % to 100 % — every value here compares directly, decade by decade.

Element	% by weight
	0.13–0.17
	≤ 0.1
	0.35–0.6
	0.025
	0.025
	0.02–0.06

0.01 %0.1 %1 %10 %100 %

The scale is logarithmic, not the element’s raw share of the alloy — the only honest way to fit 0.01 % and 100 % in one picture, and it means every value here can be compared with every other.

Element	As publishedsource text, verbatim	Min% by weight	Max% by weight	Bound
C	0,13-0,17	0.130	0.170	Range
Al	0,020-0,060	0.020	0.060	Range
Si	≤0,10	—	0.100	Max
P	0,025	0.025	0.025	Exact
S	0,025	0.025	0.025	Exact
Mn	0,35-0,60	0.350	0.600	Range

The published column is the source string byte-for-byte, decimal comma and all; Min and Max are the parsed bounds. Elements not listed have no value on file — they are omitted, never inferred.

Predicted transformation temperatures

Not enough recorded composition to predict a transformation temperature for this grade — missing: Ni, Cr, Mo.

Physical & mechanical properties

Density7,85g/cm³Exact

An absent property means we hold no value for it — it is left out rather than estimated, interpolated from a neighbouring grade, or filled from a handbook. It does not mean the property is undefined for the material.

Heat treatment

Supply condition

Annealing

Conditions the standard permits on delivery. No temperature or medium is published for these, so no order and no alternation is implied.

Source: www.caishuku.com

Similar grades — and why

Selection rule, stated so you can disagree with it: same number class 1.0, a shared category, and a published range for Mn / Si that overlaps this grade’s. These are neighbours in composition space — they are not equivalents, and none is claimed to be interchangeable with this grade.

DC 04 GT1.0337

Mn 0,30-0,60 · Si ≤0,10