PN steel grades — 635 designations — Page 8
Every grade designated under PN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Every name on this page is an indicative cross-reference, not an asserted identity: the grades are close, not interchangeable. Check the composition before you substitute.
Also known as
635 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| D70 | 1.1231 | Spring steels | 0.65–0.73 | 18 |
| D80 | 1.0622 | Others | 0.78–0.83 | 6 |
| D80A | 1.0622 | Others | 0.78–0.83 | 6 |
| D85 | 1.1269 | Spring steels | 0.8–0.9 | 14 |
| DUPLEX | 1.4460 | Stainless steels | ≤ 0.05 | 10 |
| G205 | 1.4845 | Heat resistant steels | ≤ 0.1 | 21 |
| G355 | 1.0570 | Unalloyed structural steels | ≤ 0.2 | 22 |
| G355 | 1.0570 | Unalloyed structural steels | ≤ 0.2 | 20 |
| gat. 55 | 1.1204 | Others | 0.52–0.6 | 5 |
| gat. 55 | 1.1203 | Quenched and tempered steels | 0.52–0.6 | 15 |
| gat. 65 | 1.1231 | Spring steels | 0.65–0.73 | 18 |
| gat. 65 | 1.1234 | Others | 0.6–0.75 | 9 |
| gat. 65 | 1.0603 | Spring steels | 0.65–0.72 | 10 |
| gat. 65 | 1.2007 | Tool steels for cold work | 0.65–0.7 | 8 |
| gat. 85 | 1.1269 | Spring steels | 0.8–0.9 | 14 |
| gat. 85 | 1.2004 | Tool steels for cold work | 0.8–0.9 | 8 |
| H10S2M | 1.4731 | Valve steels | 0.35–0.45 | 12 |
| H13JS | 1.4724 | Heat resistant steels | ≤ 0.12 | 15 |
| H16N36S2 | 1.4864 | Heat resistant steels | ≤ 0.15 | 14 |
| H16N36S2 | 1.4886 | Others | ≤ 0.15 | 11 |
| H16N36S2 | 1.4862 | Heat resistant steels | ≤ 0.1 | 6 |
| H17 | 1.4016 | Stainless steels | ≤ 0.08 | 18 |
| H17 | 1.4015 | Others | ≤ 0.1 | 6 |
| H17N13M2T | 1.4573 | Cast stainless steels | ≤ 0.04 | 12 |
| H17N13M2T | 1.4571 | Stainless steels | ≤ 0.08 | 18 |
| H17N13M2T H18N10MT | 1.4571 | Stainless steels | ≤ 0.08 | 18 |
| H17N13M2T lub H18N10MT | 1.4571 | Stainless steels | ≤ 0.08 | 18 |
| H17N14M2 | 1.4436 | Stainless steels | ≤ 0.05 | 19 |
| H17N2 | 1.4057 | Stainless steels | 0.12–0.22 | 17 |
| H17N2A | 1.4057 | Stainless steels | 0.12–0.22 | 17 |
| H18 | 1.4125 | Stainless steels | 0.95–1.2 | 11 |
| H18 | 1.4112 | Stainless steels | 0.85–0.95 | 13 |
| H18 | 1.3543 | Bearing steels | 0.95–1.2 | 6 |
| H18 | 1.4528 | Stainless steels | 1–1.1 | 5 |
| H18 | 1.4109 | Stainless steels | 0.6–0.75 | 10 |
| H18JS | 1.4742 | Heat resistant steels | ≤ 0.12 | 17 |
| H18N10MT | 1.4571 | Stainless steels | ≤ 0.08 | 18 |
| H18N9S | 1.4828 | Heat resistant steels | ≤ 0.2 | 20 |
| H18N9S | 1.4833 | Heat resistant steels | ≤ 0.15 | 15 |
| H20N12S2 | 1.4828 | Heat resistant steels | ≤ 0.2 | 20 |
| H20N12S2 | 1.4833 | Heat resistant steels | ≤ 0.15 | 15 |
| H23N13 | 1.4833 | Heat resistant steels | ≤ 0.15 | 15 |
| H23N13 | 1.4829 | Others | ≤ 0.14 | 8 |
| H23N18 | 1.4845 | Heat resistant steels | ≤ 0.1 | 21 |
| H23N18 | 1.4843 | Resistance heating alloys | ≤ 0.2 | 9 |
| H24JS | 1.4762 | Heat resistant steels | ≤ 0.12 | 12 |
| H25 | 1.4746 | Others | ≤ 0.12 | 8 |
| H25 | 1.4749 | Heat resistant steels | 0.15–0.2 | 10 |
| H25N20S2 | 1.4845 | Heat resistant steels | ≤ 0.1 | 21 |
| H25N20S2 | 1.4841 | Heat resistant steels | ≤ 0.2 | 17 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.