UNE steel grades — 760 designations
Every grade designated under UNE, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Every name on this page is an indicative cross-reference, not an asserted identity: the grades are close, not interchangeable. Check the composition before you substitute.
Also known as
760 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| -10S20 | 1.0721 | Free cutting steels | 0.07–0.13 | 15 |
| -30Mn5 | 1.1166 | Others | 0.3–0.37 | 4 |
| -34CrAIMo5 | 1.8507 | Nitriding steels | 0.3–0.37 | 8 |
| 03 | 1.4401 | Stainless steels | ≤ 0.07 | 20 |
| 10-02 | 1.4731 | Valve steels | 0.35–0.45 | 12 |
| 100 | 1.2067 | Tool steels for cold work | 0.95–1.1 | 21 |
| 100 | 1.3505 | Bearing steels | 0.93–1.05 | 22 |
| 100Cr6 | 1.3505 | Bearing steels | 0.93–1.05 | 22 |
| 100Cr6 | 1.2067 | Tool steels for cold work | 0.95–1.1 | 21 |
| 100CrMn6 | 1.3520 | Bearing steels | 0.93–1.05 | 16 |
| 105WCr5 | 1.2419 | Tool steels for cold work | 1–1.1 | 16 |
| 10SPb20 | 1.0721 | Free cutting steels | 0.07–0.13 | 15 |
| 10SPb20 | 1.0722 | Free cutting steels | 0.07–0.13 | 5 |
| 11SMn28 | 1.0715 | Free cutting steels | ≤ 0.14 | 14 |
| 11SMnPb28 | 1.0718 | Free cutting steels | ≤ 0.14 | 11 |
| 12-03 | 1.4404 | Stainless steels | ≤ 0.03 | 25 |
| 12-1-5-5 | 1.3202 | High-speed steels | 1.3–1.45 | 12 |
| 120 | 1.3401 | Quenched and tempered steels | 1.1–1.3 | 19 |
| 12CrMo4 | 1.7262 | Case hardening steels | 0.13–0.17 | 18 |
| 12CrMo9-10 | 1.7383 | Heat-resistant structural steels | 0.08–0.15 | 9 |
| 12SMn35 | 1.0736 | Free cutting steels | ≤ 0.14 | 11 |
| 12SMnP35 | 1.0737 | Free cutting steels | ≤ 0.14 | 8 |
| 131 | 1.6657 | Special steels for aviation and aerospace | 0.11–0.17 | 15 |
| 13MoCrV6 | 1.7715 | Heat-resistant structural steels | 0.1–0.18 | 8 |
| 14CrMo4-5 | 1.7262 | Case hardening steels | 0.13–0.17 | 18 |
| 14CrMo4.5 | 1.7335 | Heat-resistant structural steels | 0.08–0.18 | 22 |
| 14NiCrMo13 | 1.6587 | Case hardening steels | 0.15–0.21 | 15 |
| 14NiCrMo131 | 1.6657 | Special steels for aviation and aerospace | 0.11–0.17 | 15 |
| 15Ni6 | 1.5622 | Low-temperature structural steels | ≤ 0.18 | 6 |
| 15NiCr11 | 1.5732 | Case hardening steels | 0.1–0.17 | 13 |
| 16MnCr5 | 1.7131 | Case hardening steels | 0.14–0.19 | 24 |
| 16MnCr5-1 | 1.7139 | Case hardening steels | 0.14–0.19 | 11 |
| 16Mo3 | 1.5415 | Heat-resistant structural steels | 0.12–0.2 | 15 |
| 16Mo5 | 1.5423 | Heat-resistant structural steels | 0.12–0.2 | 5 |
| 17Cr3 | 1.7015 | Case hardening steels | 0.12–0.18 | 15 |
| 18 CrMo 4 | 1.3566 | Others | 0.12–0.18 | 8 |
| 18-0-1 | 1.3355 | High-speed steels | 0.73–0.83 | 22 |
| 18-0-2-10 | 1.3265 | High-speed steels | 0.72–0.8 | 6 |
| 18-09 | 1.4305 | Stainless steels | ≤ 0.1 | 17 |
| 18-1-1-5 | 1.3255 | High-speed steels | 0.75–0.83 | 14 |
| 18CrMo4 | 1.7243 | Case hardening steels | 0.15–0.21 | 12 |
| 18CrMo4-1 | 1.7244 | Case hardening steels | 0.15–0.21 | 2 |
| 1C22 | 1.0402 | Quenched and tempered steels | 0.17–0.24 | 24 |
| 2-9-2 | 1.3348 | High-speed steels | 0.95–1.05 | 8 |
| 2-9-2-8 | 1.3249 | High-speed steels | 0.85–0.92 | 4 |
| 20Mn6 | 1.1133 | Quenched and tempered steels | 0.17–0.23 | 20 |
| 20MnCr5 | 1.7131 | Case hardening steels | 0.14–0.19 | 24 |
| 20MoCr5 | 1.7321 | Case hardening steels | 0.17–0.23 | 4 |
| 20MoCr5-1 | 1.7323 | Case hardening steels | 0.17–0.23 | 2 |
| 20NiCrMo2 | 1.6523 | Case hardening steels | 0.17–0.23 | 18 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.