Sheet metal and slit strip
Sheet metal and slit strip are flat, thin metal products supplied as sheets or narrow longitudinal strips for fabrication. They are characterised by controlled thickness, width and formability, making them suitable for panels, enclosures, formed parts and other manufactured components.
| Grade | Material no. | P | S | C | Mn | Si | Cr |
|---|---|---|---|---|---|---|---|
| SPCC | — | max 0.1 | max 0.035 | max 0.15 | max 1 | — | — |
| SPCG | — | max 0.02 | max 0.02 | max 0.02 | max 0.25 | — | — |
| SAPH440 | — | max 0.04 | max 0.04 | — | — | — | — |
| SPHT2 | — | max 0.04 | max 0.04 | max 0.18 | max 0.6 | max 0.35 | — |
| SPPD | — | max 0.04 | max 0.03 | max 0.008 | max 0.4 | — | — |
| HRS3 | — | max 0.04 | max 0.04 | max 0.25 | 0.3 - 0.9 | max 0.35 | — |
| SPCF | — | max 0.03 | max 0.03 | max 0.06 | max 0.45 | — | — |
| SAPH400 | — | max 0.04 | max 0.04 | — | — | — | — |
| SPHT1 | — | max 0.04 | max 0.04 | max 0.1 | max 0.5 | max 0.35 | — |
| SPPC | — | max 0.04 | max 0.03 | max 0.008 | max 0.4 | — | — |
| HRS2 | — | max 0.04 | max 0.04 | max 0.18 | max 0.6 | max 0.35 | — |
| SPCE | — | max 0.03 | max 0.03 | max 0.08 | max 0.45 | — | — |
| SAPH370 | — | max 0.04 | max 0.04 | — | — | — | — |
| SPHF | — | max 0.025 | max 0.025 | max 0.08 | max 0.5 | — | — |
| SPHT4 | — | max 0.04 | max 0.04 | max 0.3 | 0.3 - 1 | max 0.35 | — |
| HRS1 | — | max 0.04 | max 0.04 | max 0.1 | max 0.5 | max 0.35 | — |
| SPCD | — | max 0.04 | max 0.035 | max 0.1 | max 0.5 | — | — |
| SAPH310 | — | max 0.04 | max 0.04 | — | — | — | — |
| SPHC | — | max 0.05 | max 0.05 | max 0.15 | max 0.6 | — | — |
| SPHT3 | — | max 0.04 | max 0.04 | max 0.25 | 0.3 - 0.9 | max 0.35 | — |
| SPPE | — | max 0.04 | max 0.03 | max 0.008 | max 0.4 | — | — |
| HRS4 | — | max 0.04 | max 0.04 | max 0.3 | 0.3 - 1 | max 0.35 | — |
| H 460 | 1.0574 | 0,03 | 0,03 | ≤0,10 | ≤1,80 | ≤0,70 | — |
| S550G1QL1 | 1.8944 | 0,025 | 0,02 | ≤0,20 | 0,70-1,20 | 0,40-0,80 | 0,50-1,00 |
| S620G1QL1 | 1.8954 | 0,025 | 0,02 | ≤0,20 | 0,70-1,20 | 0,40-0,80 | 0,50-1,00 |
| S690G1QL1 | 1.8964 | 0,025 | 0,02 | ≤0,20 | 0,70-1,20 | 0,40-0,80 | 0,50-1,00 |
Standards covering this category
3Property ranges
4| Property | Unit | Min | Max | Grades |
|---|---|---|---|---|
| Rm | N/mm² | 270 | 490 | 21 |
| Re | N/mm² | 175 | 305 | 6 |
| A | % | 15 | 46 | 21 |
| rho | g/cm³ | 7.85 | 7.85 | 4 |
Derived from 21 grades in this category with a recorded value.
Composition range
11| Property | Unit | Min | Max | Grades |
|---|---|---|---|---|
| C | % | 0.008 | 0.3 | 22 |
| Al | % | 0.015 | 0.015 | 1 |
| Si | % | 0.35 | 0.8 | 12 |
| P | % | 0.02 | 0.1 | 26 |
| S | % | 0.02 | 0.05 | 26 |
| Ti | % | 0.22 | 0.22 | 1 |
| Cr | % | 0.5 | 1 | 3 |
| Mn | % | 0.25 | 1.8 | 22 |
| Zr | % | 0.12 | 0.12 | 3 |
| Nb | % | 0.09 | 0.09 | 1 |
| Mo | % | 0.2 | 0.6 | 3 |
Derived from 26 grades in this category with a recorded value.