BS steel grades — 1547 designations — Page 23
Every grade designated under BS, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Every name on this page is an indicative cross-reference, not an asserted identity: the grades are close, not interchangeable. Check the composition before you substitute.
Also known as
1547 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| CFS6 | 1.1181 | Quenched and tempered steels | 0.32–0.39 | 20 |
| CFS7 | 1.1161 | Quenched and tempered steels | 0.2–0.3 | 3 |
| CFS8 | 1.1191 | Quenched and tempered steels | 0.42–0.5 | 21 |
| CFS8 | 1.1191 | Others | 0.42–0.5 | 18 |
| CFS9 | 1.5417 | Heat-resistant structural steels | 0.22–0.29 | 1 |
| CLA9 | 1.0416 | Others | 0.15–0.2 | 17 |
| CR1 | 1.0338 | Unalloyed structural steels | ≤ 0.08 | 18 |
| CR2 | 1.0347 | Unalloyed structural steels | ≤ 0.1 | 12 |
| CR3 | 1.0347 | Unalloyed structural steels | ≤ 0.1 | 12 |
| CR4 | 1.0330 | Unalloyed structural steels | ≤ 0.12 | 17 |
| CrNi17/7 | 1.4310 | Stainless steels | 0.05–0.15 | 18 |
| CS10 | 1.0301 | Case hardening steels | 0.07–0.13 | 20 |
| CS12 | 1.1121 | Case hardening steels | 0.07–0.13 | 22 |
| CS17 | 1.1141 | Case hardening steels | 0.12–0.18 | 20 |
| CS22 | 1.1151 | Quenched and tempered steels | 0.17–0.24 | 15 |
| CS30 | 1.1178 | Quenched and tempered steels | 0.27–0.34 | 13 |
| CS40 | 1.1186 | Quenched and tempered steels | 0.37–0.44 | 16 |
| CS40 | 1.0511 | Quenched and tempered steels | 0.37–0.44 | 21 |
| CS50 | 1.1206 | Quenched and tempered steels | 0.47–0.55 | 17 |
| CS50 | 1.1204 | Others | 0.52–0.6 | 5 |
| CS50 | 1.1203 | Quenched and tempered steels | 0.52–0.6 | 15 |
| CS60 | 1.1221 | Quenched and tempered steels | 0.57–0.65 | 18 |
| CS60 | 1.0601 | Quenched and tempered steels | 0.57–0.65 | 25 |
| CS60 | 1.1211 | Spring steels | 0.57–0.65 | 5 |
| CS70 | 1.1231 | Spring steels | 0.65–0.73 | 18 |
| CS80 | 1.1269 | Spring steels | 0.8–0.9 | 14 |
| CS80 | 1.1248 | Spring steels | 0.7–0.8 | 11 |
| CS80 | 1.0605 | Spring steels | 0.7–0.8 | 11 |
| CS80 | 1.2003 | Tool steels for cold work | 0.7–0.8 | 9 |
| CS80 | 1.2004 | Tool steels for cold work | 0.8–0.9 | 8 |
| CS80 | 1.0616 | Spring steels | 0.83–0.88 | 8 |
| CS80 | 1.1265 | Spring steels | 0.84–0.88 | 5 |
| CS80 | 1.9615 | Spring steels | 0.75–0.88 | 5 |
| CS95 | 1.1274 | Spring steels | 0.95–1.05 | 13 |
| CS95 | 1.1217 | Others | 0.85–0.95 | 6 |
| CS95 | 1.2018 | Tool steels for cold work | 0.9–1 | 4 |
| CS95 | 1.0618 | Others | 0.9–0.95 | 5 |
| CS95 | 1.1283 | Others | 0.96–1 | 5 |
| CS95 | 1.9618 | Others | 0.9–1.03 | 5 |
| D-1449-37C | 1.0116 | Unalloyed structural steels | ≤ 0.17 | 12 |
| D1FF | 1.0570 | Unalloyed structural steels | ≤ 0.2 | 22 |
| D1FF | 1.0570 | Unalloyed structural steels | ≤ 0.2 | 20 |
| DC01 | 1.0322 | Unalloyed structural steels | ≤ 0.12 | 17 |
| DC03 | 1.0338 | Unalloyed structural steels | ≤ 0.08 | 18 |
| DC04 | 1.0338 | Unalloyed structural steels | ≤ 0.08 | 18 |
| DD11 | 1.0332 | Unalloyed structural steels | ≤ 0.12 | 16 |
| DD13 | 1.0322 | Unalloyed structural steels | ≤ 0.12 | 17 |
| E295 | 1.0050 | Unalloyed structural steels | — | 23 |
| E295 | 1.0050 | Unalloyed structural steels | — | 23 |
| E335 | 1.0580 | Unalloyed structural steels | ≤ 0.22 | 10 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.