DIN / EN steel grades — 4704 designations — Page 10
Every grade designated under DIN / EN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an asserted identity — the same grade under this standard’s own designation. 3 of 50 rows differ and carry an “Indicative” mark.
Also known as
4704 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| 20CrMoV13-5 Withdrawn | 1.7779 | Hydrogen resistant steels | 0.17–0.23 | 1 |
| 20CrMoV13-5-5 | 1.7779 | Hydrogen resistant steels | 0.17–0.23 | 1 |
| 20CrMoVTiB4-10 | 1.7729 | Others | 0.17–0.23 | 3 |
| 20CrS4 | 1.7028 | Case hardening steels | 0.17–0.23 | — |
| 20kp Indicative | 1.1152 | Cold extrusion steels | 0.18–0.22 | 4 |
| 20Mn5 | 1.1133 | Quenched and tempered steels | 0.17–0.23 | 20 |
| 20Mn6 | 1.1169 | Low-temperature structural steels | 0.17–0.23 | 2 |
| 20MnB4 | 1.5525 | Others | 0.18–0.23 | — |
| 20MnB5 | 1.5530 | Quenched and tempered steels | 0.17–0.23 | 2 |
| 20MnB5 Indicative | — | — | 0.23–0.28 | 1 |
| 20MnCr4-2 | 1.3515 | Others | 0.17–0.23 | — |
| 20MnCr5 | 1.7147 | Case hardening steels | 0.17–0.22 | 15 |
| 20MnCr5-3 | 1.8701 | High-strength steels | ≤ 0.24 | — |
| 20MnCr6-4 | 1.8703 | High-strength steels | ≤ 0.23 | — |
| 20MnCr6-5 | 1.8704 | High-strength steels | ≤ 0.24 | — |
| 20MnCrMo4 | 1.8982 | Others | ≤ 0.22 | — |
| 20MnCrMo4-2 | 1.3570 | Others | 0.17–0.23 | — |
| 20MnCrNiMo6-3 | 1.8708 | High-strength steels | 0.16–0.22 | — |
| 20MnCrPb5 Withdrawn | 1.7146 | Others | 0.17–0.22 | — |
| 20MnCrS5 | 1.7149 | Case hardening steels | 0.17–0.22 | 8 |
| 20MnMo3-5 | 1.5421 | Heat-resistant structural steels | 0.15–0.25 | 1 |
| 20MnMoNi4-5 | 1.6311 | Heat-resistant structural steels | 0.15–0.23 | 1 |
| 20MnMoNi5-5 | 1.6310 | Heat-resistant structural steels | 0.17–0.23 | 1 |
| 20MnNb6 | 1.0471 | Others | ≤ 0.22 | — |
| 20MnNiCrMo3-2 | 1.6522 | Case hardening steels | 0.17–0.23 | 6 |
| 20MnV6 | 1.5217 | Case hardening steels | 0.16–0.22 | 2 |
| 20MoCr3 | 1.7320 | Case hardening steels | 0.17–0.23 | 2 |
| 20MoCr4 | 1.7321 | Case hardening steels | 0.17–0.23 | 4 |
| 20MoCrS3 | 1.7319 | Case hardening steels | 0.17–0.23 | 2 |
| 20MoCrS4 | 1.7323 | Case hardening steels | 0.17–0.23 | 2 |
| 20NiCrMo13-4 | 1.6660 | Others | 0.17–0.22 | 1 |
| 20NiCrMo14-5 | 1.6772 | Case hardening steels | 0.18–0.25 | — |
| 20NiCrMo14-6 | 1.6742 | Quenched and tempered steels | 0.17–0.25 | 1 |
| 20NiCrMo2 | 1.6522 | Case hardening steels | 0.17–0.23 | 6 |
| 20NiCrMo2-2 | 1.6523 | Case hardening steels | 0.17–0.23 | 18 |
| 20NiCrMo3 | 1.6527 | Case hardening steels | 0.17–0.23 | — |
| 20NiCrMo7 | 1.3576 | Others | 0.17–0.23 | 1 |
| 20NiCrMoS2 Indicative | 1.6526 | Case hardening steels | 0.17–0.23 | 9 |
| 20NiCrMoS2-2 | 1.6526 | Case hardening steels | 0.17–0.23 | 9 |
| 20NiCrMoS6-4 | 1.6571 | Case hardening steels | 0.16–0.23 | — |
| 20NiMoCr6-5 | 1.6757 | Others | 0.17–0.23 | 2 |
| 20NiMoV14-5 | 1.6348 | Others | 0.17–0.25 | — |
| 21 NiCrMo 2 2 Withdrawn | 1.6543 | Case hardening steels | 0.18–0.23 | 3 |
| 21CrMo10 | 1.2313 | Tool steels for hot work | 0.16–0.23 | — |
| 21CrMo5-2 | 1.8710 | High-strength steels | ≤ 0.26 | — |
| 21CrMoNiV4-7 | 1.6981 | Quenched and tempered steels | 0.17–0.25 | — |
| 21CrMoV5-11 | 1.8070 | Heat-resistant structural steels | 0.17–0.25 | 4 |
| 21CrMoV5-7 | 1.7709 | Heat-resistant structural steels | 0.17–0.25 | 6 |
| 21CrVMoW12 Withdrawn | 1.8212 | Others | 0.18–0.25 | 1 |
| 21Mn4 | 1.0469 | Others | 0.16–0.24 | — |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.