DIN / EN steel grades — 4704 designations — Page 19
Every grade designated under DIN / EN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an asserted identity — the same grade under this standard’s own designation. 6 of 50 rows differ and carry an “Indicative” mark.
Also known as
4704 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| 54SiCrV6 Indicative | — | — | 0.51–0.59 | 1 |
| 55 CrNiMoVS 4 2 4 Withdrawn | 1.2741 | Others | 0.53–0.58 | — |
| 550-...-TG 178 | 1.0276 | Unalloyed structural steels | — | — |
| 55Cr3 | 1.7176 | Spring steels | 0.52–0.59 | 18 |
| 55CrNiMo4 Withdrawn | 1.2736 | Others | 0.52–0.58 | — |
| 55CrNiMoV4-2-4 | 1.2742 | Others | 0.53–0.58 | — |
| 55NiCr10 | 1.2718 | Tool steels for cold work | 0.5–0.57 | 1 |
| 55NiCrMoV6 | 1.2713 | Tool steels for cold work | 0.5–0.6 | 12 |
| 55NiCrMoV6 Indicative | 1.2714 | Tool steels for hot work | 0.5–0.6 | 15 |
| 55NiCrMoV7 | 1.2714 | Tool steels for hot work | 0.5–0.6 | 15 |
| 55Si7 Withdrawn | 1.5026 | Spring steels | 0.52–0.6 | 20 |
| 55SiCr6-3 | 1.7104 | Spring steels | 0.5–0.6 | 2 |
| 55SiCr7 Withdrawn | 1.7106 | Spring steels | 0.52–0.6 | 1 |
| 56Mn4 | 1.1233 | Quenched and tempered steels | 0.52–0.6 | 7 |
| 56NiCrMoV7 Withdrawn | 1.2714 | Tool steels for hot work | 0.5–0.6 | 15 |
| 56Si7 | 1.5026 | Spring steels | 0.52–0.6 | 20 |
| 56SiCr7 | 1.7106 | Spring steels | 0.52–0.6 | 1 |
| 56SiCr7 Indicative | — | — | 0.52–0.6 | 1 |
| 57NiCrMoV7-7 | 1.2744 | Tool steels for hot work | 0.5–0.6 | 2 |
| 58CrMnB4 Withdrawn | 1.7190 | Spring steels | 0.58 | 7 |
| 58CrV4 | 1.8161 | Quenched and tempered steels | 0.55–0.62 | 4 |
| 58SiCr8 | 1.2103 | Tool steels for cold work | 0.55–0.63 | — |
| 59CrV4 | 1.2242 | Tool steels for cold work | 0.55–0.62 | 2 |
| 60 S 20 | 1.0728 | Free cutting steels | 0.57–0.65 | — |
| 60 S 22 | 1.0728 | Free cutting steels | 0.57–0.65 | — |
| 60 SPb 20 | 1.0758 | Free cutting steels | 0.57–0.65 | — |
| 60 SPb 22 | 1.0758 | Free cutting steels | 0.57–0.65 | — |
| 600-...-TG 178 | 1.0277 | Unalloyed structural steels | — | — |
| 60Cr3 | 1.7177 | Others | 0.55–0.65 | — |
| 60CrMo3-1 | 1.7239 | Others | 0.56–0.64 | — |
| 60CrMo3-2 | 1.7240 | Others | 0.56–0.64 | — |
| 60CrMo3-3 | 1.7241 | Others | 0.56–0.64 | 4 |
| 60CrMo3-3 Indicative | — | — | 0.56–0.64 | 3 |
| 60CrMoV13-5 | 1.2356 | Others | 0.5–0.7 | — |
| 60CrMoV18-5 | 1.2358 | Others | 0.58–0.62 | — |
| 60Mn3 | 1.0642 | Others | 0.57–0.65 | 1 |
| 60MnCrB3 Withdrawn | 1.7137 | Others | 0.56–0.64 | 2 |
| 60MnCrTi4 | 1.8404 | Others | 0.45–0.6 | — |
| 60MnSiCr4 | 1.2826 | Tool steels for cold work | 0.58–0.65 | 9 |
| 60NiCrMoV12-4 | 1.2743 | Tool steels for cold work | 0.55–0.6 | — |
| 60Si7 | 1.5027 | Spring steels | 0.56–0.64 | 11 |
| 60SiCr7 Withdrawn | 1.5092 | Others | 0.55–0.66 | 8 |
| 60SiCr7 Withdrawn | 1.7108 | Spring steels | 0.57–0.65 | 11 |
| 60SiCr7 Indicative | 1.0961 | High-strength multi-phase steels | ≤ 0.18 | 14 |
| 60SiCrV7 | 1.8153 | Others | 0.56–0.64 | — |
| 60SiCrV7 Indicative | — | — | 0.56–0.64 | 1 |
| 60SiMn5 Withdrawn | 1.5142 | Spring steels | 0.55–0.65 | 1 |
| 60WCrV7 Withdrawn | 1.2550 | Tool steels for cold work | 0.55–0.65 | 15 |
| 60WCrV8 | 1.2550 | Tool steels for cold work | 0.55–0.65 | 15 |
| 61CrMo4 Withdrawn | 1.7229 | Others | 0.57–0.65 | — |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.