DIN / EN steel grades — 4704 designations — Page 20
Every grade designated under DIN / EN, with the identifying and comparative data we hold for each. Open a grade for its full composition, properties and its designations in other standards. Every name on this page is recorded in our sources as this standard’s own designation for the grade.
Also known as
4704 designations| Grade | Material no. | Category | C% by weight |
|---|---|---|---|
| 61CrSiV5 | 1.2243 | Tool steels for cold work | 0.57–0.65 |
| 61SiCr7 | 1.7108 | Spring steels | 0.57–0.65 |
| 62CrMoV6 | 1.2334 | Others | 0.6–0.65 |
| 62SiMnCr4 | 1.2101 | Tool steels for cold work | 0.58–0.66 |
| 64Mn3 | 1.0640 | Others | 0.6–0.68 |
| 64SiCr5 Withdrawn | 1.2102 | Tool steels for cold work | 0.6–0.68 |
| 650-...-TG 178 | 1.0278 | Unalloyed structural steels | — |
| 65Cr3 | 1.7017 | Others | 0.6–0.7 |
| 65CrV3 | 1.7541 | Others | 0.6–0.7 |
| 65Mn4 Withdrawn | 1.1240 | Others | 0.6–0.7 |
| 65MnCr4 | 1.2125 | Tool steels for cold work | 0.6–0.68 |
| 65MnCrMo4 | 1.2309 | Tool steels for hot work | 0.6–0.68 |
| 65Si7 | 1.5028 | Spring steels | 0.6–0.7 |
| 65SiCr7 Withdrawn | 1.7107 | Others | 0.6–0.68 |
| 66Mn4 Withdrawn | 1.1260 | Others | 0.6–0.71 |
| 67 CrV 2 2 Withdrawn | 1.7503 | Others | 0.62–0.72 |
| 67CrV2 Withdrawn | 1.8150 | Others | 0.62–0.72 |
| 67SiCr5 | 1.7103 | Spring steels | 0.62–0.72 |
| 67SiCr5-2 | 1.7105 | Others | 0.62–0.72 |
| 6CrMo15-5 | 1.2341 | Tool steels for cold work | ≤ 0.07 |
| 6CrMo9-10 | 1.7385 | Others | 0.04–0.09 |
| 7 CrMo 7 5 Withdrawn | 1.7356 | Others | ≤ 0.1 |
| 70 MoMn 10 4 Withdrawn | 1.5437 | Heat-resistant structural steels | 0.63–0.77 |
| 70 S 20 | 1.0729 | Free cutting steels | 0.6–0.72 |
| 70 SPb 20 | 1.0759 | Free cutting steels | 0.65–0.75 |
| 700-...-TG 178 | 1.0279 | Unalloyed structural steels | — |
| 70Cr2 | 1.2007 | Tool steels for cold work | 0.65–0.7 |
| 70Mn3 | 1.0643 | Others | 0.65–0.75 |
| 70Mn4 | 1.1244 | Others | 0.65–0.75 |
| 70MnCrTi8 | 1.8405 | Others | 0.65–0.75 |
| 70MnMoCr8 | 1.2824 | Others | 0.65–0.75 |
| 70Si7 | 1.2823 | Tool steels for cold work | 0.65–0.75 |
| 71Si7 | 1.5029 | Spring steels | 0.68–0.75 |
| 73MoV5-2 | 1.2381 | Tool steels for cold work | 0.7–0.77 |
| 73WCrMoV2-2 | 1.2604 | Tool steels for cold work | 0.68–0.78 |
| 74CrW1 | 1.2410 | Tool steels for cold work | 0.73–0.77 |
| 74NiCr2 | 1.2703 | Tool steels for cold work | 0.7–0.78 |
| 75 WCr 12 Withdrawn | 1.2424 | Tool steels for cold work | 0.73–0.8 |
| 75Cr1 | 1.2003 | Tool steels for cold work | 0.7–0.8 |
| 75CrMoNiW6-7 | 1.2762 | Tool steels for cold work | 0.7–0.8 |
| 75Mn4 | 1.1243 | Quenched and tempered steels | 0.75 |
| 75Ni8 | 1.5634 | Low-temperature structural steels | 0.72–0.78 |
| 75NiCrMo5-3-3 | 1.2773 | Others | 0.7–0.8 |
| 76Mn3 | 1.0645 | Others | 0.7–0.8 |
| 79Ni1 Withdrawn | 1.6971 | Others | 0.75–0.85 |
| 7CrMo11-10 | 1.7384 | Others | 0.04–0.09 |
| 7CrMoBS5 | 1.7278 | Others | 0.04–0.09 |
| 7CrMoVTiB10-10 | 1.7378 | Others | 0.05–0.1 |
| 7CrWVMoNb9-6 | 1.8201 | Others | 0.04–0.1 |
| 7Mn6 | 1.1123 | Others | ≤ 0.1 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.