DIN / EN steel grades — 4704 designations — Page 50
Every grade designated under DIN / EN, with the identifying and comparative data we hold for each. Open a grade for its full composition, properties and its designations in other standards. Every name on this page is recorded in our sources as this standard’s own designation for the grade.
Also known as
4704 designations| Grade | Material no. | Category | C% by weight |
|---|---|---|---|
| HS6-5-4 | 1.3351 | High-speed steels | 1.25–1.4 |
| HS6-6-2 | 1.3350 | High-speed steels | 1–1.1 |
| HS7-4-2-5 | 1.3246 | High-speed steels | 1.05–1.15 |
| HS7-5-3 | 1.3347 | High-speed steels | 1.16–1.2 |
| HS7-7-7-11 | 1.3242 | High-speed steels | 2.2–2.4 |
| HS9-4-3-11 | 1.3208 | High-speed steels | 1.35–1.45 |
| HX 160 YD | 1.0910 | Higher strength steels | ≤ 0.01 |
| HX 180 BD | 1.0354 | Higher strength steels | — |
| HX 180 BD | 1.0914 | Higher strength steels | ≤ 0.1 |
| HX 180 YD | 1.0921 | Higher strength steels | ≤ 0.01 |
| HX 220 BD | 1.0353 | Higher strength steels | — |
| HX 220 BD | 1.0919 | Higher strength steels | ≤ 0.1 |
| HX 220 PD | 1.0358 | Others | ≤ 0.06 |
| HX 220 YD | 1.0923 | Higher strength steels | ≤ 0.01 |
| HX 260 BD | 1.0924 | Higher strength steels | ≤ 0.1 |
| HX 260 PD | 1.0431 | Others | ≤ 0.11 |
| HX 260 YD | 1.0926 | Higher strength steels | ≤ 0.01 |
| HX 300 PD | 1.0443 | Others | ≤ 0.11 |
| HX 300 YD | 1.0927 | Higher strength steels | ≤ 0.015 |
| HX260BD | 1.0433 | Others | — |
| HX260LAD | 1.0929 | Higher strength steels | ≤ 0.11 |
| HX300BD | 1.0445 | Higher strength steels | — |
| HX300BD | 1.0930 | Higher strength steels | ≤ 0.11 |
| HX300LAD | 1.0932 | Higher strength steels | ≤ 0.11 |
| HX340BD | 1.0945 | Higher strength steels | ≤ 0.11 |
| HX340LAD | 1.0933 | Higher strength steels | ≤ 0.11 |
| HX380LAD | 1.0934 | Higher strength steels | ≤ 0.11 |
| HX420LAD | 1.0935 | Higher strength steels | ≤ 0.11 |
| HX460LAD | 1.0990 | Higher strength steels | ≤ 0.15 |
| HX500LAD | 1.0991 | Higher strength steels | ≤ 0.15 |
| IF 18 | 1.0873 | Unalloyed structural steels | ≤ 0.02 |
| KSt 37-2 | 1.0113 | Unalloyed structural steels | ≤ 0.17 |
| KSt 37-3 | 1.0127 | Unalloyed structural steels | ≤ 0.17 |
| KSt 44-2 | 1.0148 | Unalloyed structural steels | ≤ 0.21 |
| KSt 44-3 | 1.0137 | Unalloyed structural steels | ≤ 0.2 |
| L175 | 1.8700 | High-strength steels | ≤ 0.21 |
| L175P | 1.8707 | High-strength steels | ≤ 0.21 |
| L195 | 1.0026 | Unalloyed structural steels | ≤ 0.2 |
| L210 | 1.0307 | Unalloyed structural steels | ≤ 0.17 |
| L210 | 1.8713 | High-strength steels | ≤ 0.22 |
| L210GA | 1.0319 | Unalloyed structural steels | ≤ 0.21 |
| L235 | 1.0252 | Unalloyed structural steels | ≤ 0.16 |
| L235GA | 1.0458 | Others | ≤ 0.16 |
| L245 | 1.8723 | High-strength steels | — |
| L245GA | 1.0459 | Others | ≤ 0.2 |
| L245M | 1.8746 | High-strength steels | — |
| L245MB | 1.0418 | Fine-grain structural steels | ≤ 0.16 |
| L245ME | — | Others | ≤ 0.18 |
| L245MO | 1.1050 | Others | ≤ 0.12 |
| L245MS | 1.1030 | Others | ≤ 0.1 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.