DIN / EN steel grades — 4704 designations — Page 67
Every grade designated under DIN / EN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an asserted identity — the same grade under this standard’s own designation. 3 of 50 rows differ and carry an “Indicative” mark.
Also known as
4704 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| S275M | 1.8818 | Others | ≤ 0.13 | 1 |
| S275MH | 1.8843 | Others | ≤ 0.13 | — |
| S275ML | 1.8819 | Others | ≤ 0.13 | 1 |
| S275MLH | 1.8844 | Others | ≤ 0.13 | — |
| S275N | 1.0490 | Fine-grain structural steels | ≤ 0.18 | 6 |
| S275NH | 1.0493 | Others | ≤ 0.2 | 1 |
| S275NL | 1.0491 | Fine-grain structural steels | ≤ 0.16 | 5 |
| S275NLH | 1.0497 | Others | ≤ 0.2 | — |
| S280GD | 1.0244 | Unalloyed structural steels | ≤ 0.2 | — |
| S315G1S | 1.0513 | Others | ≤ 0.18 | 1 |
| S315G2S | 1.0514 | Others | ≤ 0.18 | 1 |
| S315G3S | 1.0515 | Others | ≤ 0.18 | 1 |
| S315G4S | 1.8840 | Others | ≤ 0.16 | — |
| S315MC | 1.0972 | Fine-grain steels for cold forming | ≤ 0.12 | 6 |
| S315NC | 1.0973 | Fine-grain steels for cold forming | ≤ 0.16 | 1 |
| S315NL1 | 1.1105 | Fine-grain structural steels | ≤ 0.16 | — |
| S320GD | 1.0250 | Unalloyed structural steels | ≤ 0.2 | — |
| S320GP | 1.0046 | Unalloyed structural steels | ≤ 0.24 | 2 |
| S320MC Withdrawn | 1.0960 | Fine-grain steels for cold forming | ≤ 0.12 | — |
| S325G | 1.0570 | Unalloyed structural steels | ≤ 0.2 | 20 |
| S330MC | 1.0598 | Others | ≤ 0.18 | — |
| S340MC | 1.0974 | Fine-grain steels for cold forming | ≤ 0.12 | — |
| S340MGC Withdrawn | 1.0961 | High-strength multi-phase steels | ≤ 0.18 | 14 |
| S340NC | 1.0975 | Fine-grain steels for cold forming | ≤ 0.16 | — |
| S350GD | 1.0529 | Unalloyed structural steels | ≤ 0.2 | — |
| S355 J 0 | 1.0507 | Others | ≤ 0.2 | 8 |
| S355 K 2 C | 1.0593 | Others | ≤ 0.2 | — |
| S355G1 | 1.8814 | Others | ≤ 0.2 | 2 |
| S355G1+N | 1.8814 | Others | ≤ 0.2 | 2 |
| S355G10 Indicative | 1.8813 | Others | ≤ 0.12 | 1 |
| S355G10+M | 1.8813 | Others | ≤ 0.12 | 1 |
| S355G10+N | 1.8813 | Others | ≤ 0.12 | 1 |
| S355G11 | 1.8806 | Others | ≤ 0.14 | 3 |
| S355G11+M | 1.8806 | Others | ≤ 0.14 | 3 |
| S355G11+N | 1.8806 | Others | ≤ 0.14 | 3 |
| S355G12 | 1.8809 | Others | ≤ 0.14 | 3 |
| S355G12+M | 1.8809 | Others | ≤ 0.14 | 3 |
| S355G12+N | 1.8809 | Others | ≤ 0.14 | 3 |
| S355G13+N | 1.1182 | Others | ≤ 0.16 | — |
| S355G13+QT | 1.1182 | Others | ≤ 0.16 | — |
| S355G14 Indicative | 1.1184 | Others | ≤ 0.18 | 1 |
| S355G14+N | 1.1184 | Others | ≤ 0.18 | 1 |
| S355G14+QT | 1.1184 | Others | ≤ 0.18 | 1 |
| S355G15+N | 1.1190 | Others | ≤ 0.18 | — |
| S355G15+QT | 1.1190 | Others | ≤ 0.18 | — |
| S355G1M | 1.8822 | Others | ≤ 0.16 | — |
| S355G1S | 1.0583 | Others | ≤ 0.18 | 1 |
| S355G2 Indicative | 1.8801 | Others | ≤ 0.2 | 1 |
| S355G2+N | 1.8801 | Others | ≤ 0.2 | 1 |
| S355G2S | 1.0584 | Others | ≤ 0.18 | 1 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.