DIN / EN steel grades — 4704 designations — Page 68
Every grade designated under DIN / EN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an asserted identity — the same grade under this standard’s own designation. 9 of 50 rows differ and carry an “Indicative” mark.
Also known as
4704 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| S355G3 Indicative | 1.8802 | Others | ≤ 0.18 | 1 |
| S355G3+N | 1.8802 | Others | ≤ 0.18 | 1 |
| S355G3S | 1.0589 | Others | ≤ 0.18 | 1 |
| S355G4 | 1.8803 | Others | ≤ 0.16 | 1 |
| S355G4+M | 1.8803 | Others | ≤ 0.16 | 1 |
| S355G4S | 1.8841 | Others | ≤ 0.16 | — |
| S355G5 Indicative | 1.8804 | Others | ≤ 0.14 | 1 |
| S355G5+M | 1.8804 | Others | ≤ 0.14 | 1 |
| S355G6 Indicative | 1.8805 | Others | ≤ 0.14 | 1 |
| S355G6+M | 1.8805 | Others | ≤ 0.14 | 1 |
| S355G7 Indicative | 1.8808 | Others | ≤ 0.14 | 2 |
| S355G7+M | 1.8808 | Others | ≤ 0.14 | 2 |
| S355G7+N | 1.8808 | Others | ≤ 0.14 | 2 |
| S355G8 Indicative | 1.8810 | Others | ≤ 0.14 | 3 |
| S355G8+M | 1.8810 | Others | ≤ 0.14 | 3 |
| S355G8+N | 1.8810 | Others | ≤ 0.14 | 3 |
| S355G9 Indicative | 1.8811 | Others | ≤ 0.12 | 1 |
| S355G9+M | 1.8811 | Others | ≤ 0.12 | 1 |
| S355G9+N | 1.8811 | Others | ≤ 0.12 | 1 |
| S355GO4 Withdrawn | 1.1102 | Others | ≤ 0.08 | — |
| S355GO5 Withdrawn | 1.8858 | Others | ≤ 0.08 | — |
| S355GP | 1.0083 | Unalloyed structural steels | ≤ 0.24 | 3 |
| S355GT | 1.0580 | Unalloyed structural steels | ≤ 0.22 | 10 |
| S355J0 Indicative | 1.0553 | Unalloyed structural steels | ≤ 0.2 | 20 |
| S355J0C Indicative | 1.0554 | Unalloyed structural steels | ≤ 0.2 | 8 |
| S355J0Cu | 1.0507 | Others | ≤ 0.2 | 8 |
| S355J0H | 1.0547 | Others | ≤ 0.22 | 4 |
| S355J0W | 1.8959 | Weathering steels | ≤ 0.16 | 10 |
| S355J0WP | 1.8945 | Weathering steels | ≤ 0.12 | 16 |
| S355J2 | 1.0570 | Unalloyed structural steels | ≤ 0.2 | 22 |
| S355J2 | 1.0577 | Unalloyed structural steels | ≤ 0.2 | 11 |
| S355J2 | 1.0585 | Others | ≤ 0.2 | 1 |
| S355J2C | 1.0569 | Unalloyed structural steels | ≤ 0.2 | — |
| S355J2C | 1.0579 | Unalloyed structural steels | ≤ 0.2 | 3 |
| S355J2G1W Withdrawn | 1.8963 | Weathering steels | ≤ 0.16 | 9 |
| S355J2G2W Withdrawn | 1.8965 | Weathering steels | ≤ 0.16 | 3 |
| S355J2G3 | 1.0570 | Unalloyed structural steels | ≤ 0.2 | 22 |
| S355J2G3C | 1.0569 | Unalloyed structural steels | ≤ 0.2 | — |
| S355J2G3C | 1.0573 | Others | ≤ 0.22 | — |
| S355J2G3Cu | 1.0585 | Others | ≤ 0.2 | 1 |
| S355J2G3Cu | 1.0585 | Others | ≤ 0.2 | 1 |
| S355J2G3CuC | 1.0587 | Others | ≤ 0.2 | — |
| S355J2G3F | 1.0572 | Others | ≤ 0.22 | — |
| S355J2G4 | 1.0577 | Unalloyed structural steels | ≤ 0.2 | 11 |
| S355J2G4C | 1.0579 | Unalloyed structural steels | ≤ 0.2 | 3 |
| S355J2H | 1.0576 | Fine-grain structural steels | ≤ 0.22 | 3 |
| S355J2W Withdrawn | 1.8963 | Weathering steels | ≤ 0.16 | 9 |
| S355J2W | 1.8965 | Weathering steels | ≤ 0.16 | 3 |
| S355J2W(+N) Indicative | 1.8963 | Weathering steels | ≤ 0.16 | 9 |
| S355J2WP | 1.8946 | Weathering steels | ≤ 0.12 | 4 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.