DIN / EN steel grades — 4704 designations — Page 7
Every grade designated under DIN / EN, with the material number it maps to, what kind of steel it is, its carbon window and how many other standards carry it. Open a grade for its full composition, properties and its designations in other standards. Unless marked, every name here is an asserted identity — the same grade under this standard’s own designation. 4 of 50 rows differ and carry an “Indicative” mark.
Also known as
4704 designations| Grade | Material no. | Category | C% by weight | Also inother standards |
|---|---|---|---|---|
| 13MnNi6-3 | 1.6217 | Low-temperature structural steels | ≤ 0.16 | 2 |
| 13MnNiMo5-4 | 1.8807 | Others | ≤ 0.15 | — |
| 13MoCrNi42-16-14 | 1.3555 | Others | 0.1–0.15 | — |
| 13MoCrNiV42-16-14 Indicative | 1.3590 | Others | 0.12 | 2 |
| 13NiCr6 | 1.5713 | Others | 0.1–0.17 | 3 |
| 140Cr2 | 1.2008 | Tool steels for cold work | 1.35–1.5 | 9 |
| 140Cr3 Withdrawn | 1.2008 | Tool steels for cold work | 1.35–1.5 | 9 |
| 140CrV1 | 1.2206 | Tool steels for cold work | 1.35–1.45 | — |
| 140CrV1 Indicative | 1.2008 | Tool steels for cold work | 1.35–1.5 | 9 |
| 142WV13 | 1.2562 | Tool steels for cold work | 1.35–1.5 | 1 |
| 145Cr6 | 1.2063 | Tool steels for cold work | 1.4–1.6 | 4 |
| 145V33 | 1.2838 | Tool steels for cold work | 1.4–1.5 | — |
| 14CrMoV6-9 | 1.7735 | Quenched and tempered steels | 0.11–0.17 | 1 |
| 14MnTi5 | 1.8886 | Others | ≤ 0.18 | — |
| 14MoV6-3 | 1.7715 | Heat-resistant structural steels | 0.1–0.18 | 8 |
| 14Ni6 | 1.5622 | Low-temperature structural steels | ≤ 0.18 | 6 |
| 14NiCr10 Withdrawn | 1.5732 | Case hardening steels | 0.1–0.17 | 13 |
| 14NiCr14 Withdrawn | 1.5752 | Case hardening steels | 0.14–0.2 | 15 |
| 14NiCr14 | 1.5752 | Case hardening steels | 0.14–0.2 | 15 |
| 14NiCr18 | 1.5860 | Case hardening steels | 0.1–0.17 | 3 |
| 14NiCrMo13-4 | 1.6657 | Special steels for aviation and aerospace | 0.11–0.17 | 15 |
| 14NiCrPb10 Withdrawn | 1.5733 | Others | 0.1–0.17 | — |
| 14NiMn6 Withdrawn | 1.6228 | Low-temperature structural steels | ≤ 0.18 | 1 |
| 15 MnNiMoV 5 3 Withdrawn | 1.6918 | Others | 0.08–0.15 | — |
| 15 S 10 | 1.0710 | Free cutting steels | 0.12–0.18 | 5 |
| 15 S 20 | 1.0723 | Free cutting steels | 0.12–0.18 | 3 |
| 15 S 22 | 1.0723 | Free cutting steels | 0.12–0.18 | 3 |
| 15 SMn 13 | 1.0725 | Free cutting steels | 0.12–0.18 | 5 |
| 15 SPb 20 | 1.0753 | Free cutting steels | 0.12–0.18 | — |
| 15 SPb 22 | 1.0753 | Free cutting steels | 0.12–0.18 | — |
| 15B2 | 1.5501 | Others | 0.13–0.16 | — |
| 15Cr3 | 1.7015 | Case hardening steels | 0.12–0.18 | 15 |
| 15CrMo4 | 1.3566 | Others | 0.12–0.18 | 8 |
| 15CrMo5 | 1.7262 | Case hardening steels | 0.13–0.17 | 18 |
| 15CrMoV5-10 | 1.7745 | Others | 0.1–0.16 | 1 |
| 15CrMoV5-9 | 1.8521 | Nitriding steels | 0.13–0.18 | 1 |
| 15CrNi6 | 1.5919 | Case hardening steels | 0.12–0.18 | 11 |
| 15CrNi6 Indicative | 1.5918 | Case hardening steels | 0.14–0.2 | 3 |
| 15kp Indicative | 1.1132 | Cold extrusion steels | 0.13–0.17 | 5 |
| 15Mn3 | 1.0467 | Others | 0.12–0.18 | 1 |
| 15Mn3Al | 1.0468 | Others | 0.12–0.18 | — |
| 15Mn4 | 1.0468 | Others | 0.12–0.18 | — |
| 15MnCrMo3-2 | 1.8719 | High-strength steels | 0.1–0.2 | — |
| 15MnCrMoNiV5-3 | 1.6920 | Others | ≤ 0.17 | — |
| 15MnMoV4-5 | 1.5402 | Heat-resistant structural steels | ≤ 0.18 | — |
| 15MnNi6-3 | 1.6210 | Others | 0.12–0.18 | — |
| 15MnV5 | 1.5213 | Others | 0.12–0.18 | — |
| 15Mo3 Withdrawn | 1.5415 | Heat-resistant structural steels | 0.12–0.2 | 15 |
| 15NiCr13 | 1.5752 | Case hardening steels | 0.14–0.2 | 15 |
| 15NiCr13 | 1.5752 | Case hardening steels | 0.14–0.2 | 15 |
This grade’s own name — recorded in our sources as this grade’s own designation under that standard.
Indicative — taken from a published cross-reference table; a close match, not a guarantee of interchangeability. Verify against the mill certificate before ordering.
Withdrawn — designation no longer current — a separate column from the two above, so a name can be same grade and withdrawn at once.